di-soric LI 16-12.5-188-240 I Measuring Light Grids Owner’s Manual
- June 13, 2024
- di-soric
Table of Contents
di-soric LI 16-12.5-188-240 I Measuring Light Grids
Product Information
The 207216 LI 16-12.5-188-240 I Light grids are a type of sensor that comes with evaluation electronics. They are designed for measuring and switching applications. The light grids have a compact design with an aluminum housing, making them easy to install. They are suitable for both horizontal and diagonal beam evaluation.
Key Features:
- Transmitter and receiver included
- Monitoring height adjustable
- Compact design
- Aluminum housing
- Easy installation
More Information / Accessories:
For more information and available accessories, please visit the following
link: di-soric.com/207216
Product Usage Instructions
Installation:
- Identify the transmitter (1) and receiver (2) units.
- Choose the desired monitoring height (3) and adjust it accordingly.
- Mount the light grids in the desired position using appropriate fixtures or brackets.
- Ensure proper alignment of the transmitter and receiver units for accurate beam evaluation.
- Connect the necessary cables to the evaluation electronics (5) according to the provided instructions.
Operation:
Once the light grids are properly installed, follow these steps to operate
them:
- Apply the service voltage to the light grids.
- Observe the switching output for any changes or indications.
- Adjust the monitoring height (3) if required for optimal performance.
Maintenance:
To ensure optimal performance and longevity of the light grids, follow these
maintenance guidelines:
- Regularly clean the light grids and remove any dust or debris that may accumulate on the surface.
- Inspect the cables and connections for any signs of damage or wear. Replace as needed.
- Refer to the user manual for any specific maintenance recommendations provided by the manufacturer.
Note: Always refer to the user manual for detailed instructions and safety guidelines before installing, operating, or maintaining the light grids.
- With evaluation electronics LVE … / LVX … measuring and switching
- With evaluation electronics LVB … switching
- Beam evaluation horizontal or diagonal
- Compact design
- Aluminum housing
- Easy to install
- Transmitter
- Receiver
- Monitoring height H
- Profile length L
- Evaluation electronics
- Profile cross section
To be used with evaluation electronics LVE …/ LVX … ILVB …
- BN: brown
- GN: green
- GY: grey
- WH: white
- YE: yellow
TECHNICAL DATA
- Service voltage 20 … 26 V DC (see evaluation electronics)
- Assembly Threaded bolt (2)
- Profile cross section 12 x 24 mm
- Dimension
- A: 70 mm
- B: 100 mm
- X: 13,5 mm
- Y: 38,5 mm
- Profile length 240 mm
- Housing material Aluminum (natural)
- Protection class III, operation on protective low voltage
- Evaluation absolute, percentage, Configurable via evaluation electronics
- Evaluation electronics external
- Output function Configurable via evaluation electronics
- Switching output Configurable via evaluation electronics, NO, NC
- Light source LED
- Color Infrared
- Wavelength 880 nm
- Beam evaluation via external evaluation electronics
- Beam separation 12,5 mm
di-soric GmbH & Co. KG . Steinbeisstraße 6 . DE-73660 Urbach. www.di-
soric.com
© di-soric . Right to change reserved . 13.08.2022 . Page 2 (2)