GIGABYTE GP-UD850GM 850 W ATX 12V V2.31 80 Plus Gold Certified Full Modular Active PFC Power Supply User Manual

October 26, 2023
Gigabyte

GIGABYTE GP-UD850GM 850 W ATX 12V V2.31 80 Plus Gold Certified Full
Modular Active PFC Power Supply logo

GIGABYTE GP-UD850GM 850 W ATX 12V V2.31 80 Plus Gold Certified Full

Modular Active PFC Power Supply

How To Create Digital Clock Using H...

How To Create Digital Clock Using HTML CSS & JavaScript _ Display Time Using JavaScript

GIGABYTE GP-UD850GM 850 W ATX 12V V2.31 80 Plus Gold Certified Full Modular
Active PFC Power Supply product

Installation

  1. Unscrew and open the side panel of the chassis

  2. Install the power supply

  3. Connect Motherboard (20+4 Pin) and CPU (4+4 Pin) connectors to your motherboard

  4. Connect other connectors, like PCI-E (6+2pin), SATA and Molex from power supply to your system components and make sure that all of them are well connected

  5. Close the chassis and reattach the case screws

  6. Plug in the power cord of the power supply and switch on the power

Cautions and Warnings

  • Please unplug or switch off the power supply when installing it
  • Please make sure that the power source is consistent and stable before switching on the power supply
  • Do not plug or unplug the power cord when the power supply is on. It will cause serious damage to your components
  • Do not use the power supply in a high humidity or high temperature environment
  • High voltage exists in the power supply and only and authorized service technician can open the power supply
  • All warranties and guarantees will be voided in the event of failure to comply with any of the warnings and cautions covered in this manual.
  • If the power supply is not working properly, please contact our Product Service Center.

Troubleshooting

If your computer does not work normally after installing the power supply, please follow the troubleshooting guide as listed below:

  1. Please make sure the AC power is connected correctly
  2. Please make sure the Motherboard 20+4pin and CPU 8 pin connectors are connected correctly to the motherboard
  3. If the power supply still does not work normally, please contact our service center immediately

Warranty

  • Gigabyte provides hardware limited warranty for the power supply on the date of purchase and guarantees this device to be free of defects in material and workmanship. Please keep your receipt with safety.
  • This product is designed only for computer and using this device in any other purposes will void the warranty. If you are not familiar with power supply installation, please ask for professional technical assistance.
  • The warranty is applied to damages caused through normal usage and it will be void if the device was damaged because of abuse, alteration, misuse, negligence, incorrect voltage supply, air/water pollution, accidents and natural disasters.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals