SSE1 Multi-axis Motorized Slider User Manual

SSE1 Multi-axis Motorized Slider

Buttons Description

Product Description

Featured

free switching
Horizontal rotating platform| ** Horizontal rotation possible
Motor| Can move left and right to determine the position of the Motor
Power button| Switch
1/4&3/8 inch matryoshka screw socket| 1/4 & 3/8 thread can be installed directly wit hout conversion
2.5mm shutter release socket| It can be directly connected to the camera through the shutter cable to get the slider control camera
OK Buttons| Confirm
USB Type-C socket| Supply power to the Motor (5V-12V/3A)
Battery lock| Used for fi xing between t he battery and the battery compartment
Battery compartment| Compatib le with lith ium batteries such as F550/F750/F970and ZEAPON NPF-550QC
Support foot lock| Used to lock and adjust the support feet, multi -posi tion adjustable
Slider lock| For fastening and loosening sliders
Tripod suppo rt rod| When in tripod mode, better fix and support the slider
Fun c tion| Button action| Beep**
---|---|---
Turn on the power| Long press the power button for 3s| I
Turn off the power| Long press the power button for 3s| I
Move to the left| Long press the left button| I
Move to the right| Long press the right button| I
Speed adjustment| Pull the speed wheel| I
Create waypoints| Click the A/ B button| Create waypoint A beep
Create waypoint B beeps twice
Delete all waypoints| Enter menu selection| I
Start / pause| Click OK| I
Cycle start| Click cycle Buttons| Beep once
Auto matic left/right movement| Double click the arrow Buttons| I
Manually set waypoint| Long press the 2s manual dot button| I

A detailed operation video can be viewed on the official website: https://www.zeapon.com

Quick release plate installation

• Support 1/4 and 3/8 inch screws, multi hole positioning, more firm.
• 1/483/8 inch matryoshka screw socket Adjustable support feet.
• Adjustable support feet

Belt replacement

Belt Adjustment

Manual Motorized Control Switch Instructions

Slider Lock Instructions

Head lock instructions

1. When the head lock is unlocked, the head can rotate.

2. After the head lock is locked, the head is in a locked state and cannot be rotated.
   It is convenient to install equipment at this time.

3. The head is in the locked state, install the device.
   After installation, loosen and you can use it normally.

Two-axis linkage

Three-axis linkage

Ground mode

Tripod mode

Head mode

Horizontal mode

Control Panel

Menu interface operation

Follow the steps below to operate the menu

1. Show menu
   Press the button to display the menu

2. Choose a menu
   Press A or w to position the cursor on the selected menu

3. Confirm selection of highlighted item
   Press to select the highlighted item. Press to exit without making a selection.

AB fixed point

Delete AB fixed poin

Time-lanse photogranhy

Connect new device

Equipment upgrade

The upgrade of the slider needs to be upgraded through the APP. For the APP, please go to the major application markets to search for “Zeapon Lab or ZEAPON official website to download and.
For the specific operation steps of the upgrade, please refer to the APP operation guide, or watch the operation video on the official website

Real-time speed regulation

In the Motorized control mode, before the point AB is set, manually pull the adjustment wheel, and the total running speed value of the system will be displayed on the screen in real time

Manual dot

APP manual fixed point

1. Long press the power button for 3s to boot
2. Open the APP and connect to the corresponding slider
3. Long press the manual dotting button on the Motor
4. Push the Motorized control module to the proper position
5. Turn the pan/tilt to a suitable position
6. Click point A to set point A
7. Push the Motorized control module to the proper position
8. Turn the pan/tilt to a suitable position
9. Click point B to set point B
10. Click start button
    Repeat the above 3/4/5 point operation *APP dot can set A—-F six points For more APP functions, refer to the official tutorial

FCC Statement

This equipment has been tested and found to comply with the Imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. in portable exposure condition without restriction.

Kind tIps
Please go to the major application markets to search for “Zeapon Lab” or ZEAPON official website www.zeapon.com to download and install the APP!

Please note: This product does not provide batteries and battery chargers, if necessary, please purchase them separately!
Thank you for using it!

• Ifthe internal structure of the Motor is disassembled without authorization, the warranty service cannot be enjoyed!!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>