genie HDMC221CPV2 2.1MP HD-SDI Encapsulated Camera with 4.3mm Conical Pinhole Lens User Manual

: June 13, 2024
: GENIE

Table of Contents

Intro Section
Introduction
Connection
OSD Manual
Hidden Menu
5.0 RS-485
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

genie HDMC221CPV2 2.1MP HD-SDI Encapsulated Camera with 4.3mm Conical Pinhole Lens

genie HDMC221CPV2 2.1MP HD-SDI Encapsulated Camera with 4.3mm Conical
Pinhole Lens

Intro Section

Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only.
The contents of this manual are subject to change without notice.

CAUTION:

Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
To help prevent electric shock, plug the equipment and peripheral power cables into properly polarized or grounded electrical outlets. These cables are equipped with the wide blade or the third prong to ensure proper grounding.
Do not use adapter plugs or remove the grounding prong from a cable. If the provided plug does not fit your outlet, consult an electrician.
1. Ensure that nothing rests on your equipment’s cables and that the cables are not located where they can be stepped on, tripped over, or pinched.
Only use attachments or accessories as specified.
Only use the equipment with the cart, stand, tripod, bracket, or table that is specified by the manufacturer or sold with the apparatus. When a cart is used, use caution to prevent the cart from tipping over and to avoid injury.
Do not connect or disconnect during lightning storms due to risk of electric shock.
If any of the following conditions occur, unplug the equipment from the electrical outlet and replace the part or contact your trained service provider:
The power cable, extension cable, or plug is damaged.
An object has fallen into the equipment.
The equipment has been exposed to water.
The equipment has been dropped or damaged.
The equipment does not operate correctly when you follow the operating instructions.

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Introduction

The Genie HDMC221CPV2 is a 2.1MP HD-SDI encapsulated camera with a 4.3mm conical pinhole lens.

Product Features

1/2.8” Progressive Scan CMOS
1080p (1920×1080) @ 30 (25)fps
EX-SDI/HD-SDI/CVBS output
Conical pinhole lens 4.3mm
Electronic Day & Night
WDR, 3D DNR, Defog
RS485 or AD KEY
30x30mm Mini square camera

Product Dimensions

Components

Camera
Mounting bracket
Screws (Tapping and M2)
Operational manual
DIY cable

Mounting Position

Mounting Position

Specification

Camera	Image Sensor	1/2.8” SONY Exmor R Progressive Scan CMOS
Resolution	HD-SDI/EX-SDI1.0_2.0_2.1: 1080p @ 30fps (25fps) / 720p @

60fps (50fps) / 720p @ 30fps (25fps) TV out: CVBS NTSC / PAL (720H)

-20°C~+60°C (Storage)

Dimensions| 30 x 30 mm
Weight| Approx.28.9g (Board lens)

Connection

Basic Specification

Option Specification

OSD Manual

Menu structure

f sr ITEM| 2’ND ITEM| 3’RD ITEM or DATA| 4’TH ITEM or DATA| 5TH ITEM or DATA
---|---|---|---|---
LENS| LENS TYPE| ELC| |
LENS MODE| NORMAL/DEBLUR|
RETURN| | |
EXPOSURE| BRIGHTNESS| 0-20| |
SHUTTER MODE| AUTO/MANUAL/FLICKER| |
SHUTTER SPEED| 1/30(25),1/60(50),1/120(100),1/250,1/500,1/11300,1/2000,1/4 000,1/8000,1/16000 1/30000
DSS| OFF/X2/X4/X8/X16/ X32| |
AGC MAX| OFF,3dB-45dI3| |
INITIAL| | |
RETURN| | |
WHITE BALANCE| WB MODE| AUTO/AUTO EXT /PUSH LOCK/MANUAL|
PUSH AUTO| ( )| |
COLOR GAIN| 0-20| |
KELVIN| LOW/MIDDLE/HIGH| |
RED GAIN| 0-20| |
BLUE GAIN| 0-20| |
INITIAL| | |
RETURN| | |
WDR/BLC| MODE| OFF/BLC/HLC/WDR| |
LEVEL| 0-20| |
X-POSITION| 0-20| |
Y•POSITION| 0-20| |
X-SIZE| 0-20| |
Y-SIZE| 0 – 20| |
COLOR| BLACK/WHITE/YELLOW/CYAN/GREEN/MAGENTA/RED/BLUE
INITIAL| | |
RETURN| | |
DAY &NIGHT| MODE| AUTO/DAY(COLOR)/NIGHT(BW)|
DWLL TIME| 0-20 sec| |
D >N THRES| 1-35| |
N >0 THRES| 0 – 34| |
INITIAI| | |
1’ST ITEM| 2.ND ITEM| 3 RD ITEM or DATA| 4’TH ITEM or DATA| 5’TH ITEM or DATA
---|---|---|---|---
IMAGE| SHARPNESS| 0–10| |
GAMMA| 0.45/0.50/0.5510.6

0/0.65/0.70/0.75

| |
FLIP| OFF/H-FLIP/ V-FLIP/HV-FLIP| |
D-WDR| OFF/ON| |
DNR| OFF/LOW/MIDDLE/ HIGH| |
DZOOM| x1.0- x16| |
DEFOG| OFF/ON| MODE| AUTO/MANUAL
LEVEL| LOW/MIDDLE/HIGH
RETURN|
INITIAL| | |
RETURN| | |
SPECIAL.| CAM TITLE| OFF/ON| EDIT PANEL
↓

ABCDEFGHIJKLMN OPQRSTUVWXYZI7

0123456789-0″

SP > **< OK**

|
POSITION| [POSITION EDIT]
RETURN|
PRIVACY| OFF/ON| ZONE NO| 0-15
MASK MODE| OFF/ON
X-POSITION| 0-60
Y-POSITION| 0-34
X-SIZE| 0-60
Y-SIZE| 0-34
COLOR| WHITE/YELLOW/ CYAN/GREEN/ MAGENTA/RED/ BLUE
TRANSPARENCY| 046/3346/6696/100%
INITIAL|
RETURN|
| | | | |

Convert SDI Output Mode

STEP 1. ENTER
RS485 : Press [LEFT] → [LEFT] → [RIGHT] →[RIGHT] key.
AD-KEY : Press UP/DOWN/LEFT/RIGHT key 3 times.
STEP 2. SELECT
Press UP key 5 times : EX-SDI 2.1
Press DOWN key 5 times : EX-SDI 2.0
Press LEFT key 5 times : HD-SDI
Press RIGHT key 5 times : EX-SDI 1.0
STEP 3. CONFIRM
If the ‘YES’ is not checked within 30sec, the value returns to the previous setting.

5.0 RS-485

Communication Specification

RateBaud	Default 9600bps
Data bits	8 bits
Stop bits	1 bits
CAM ID	Default “1”
Parity Check	None
Supported Protocol	PELCO-D, PELCO-P

PELCO Protocol for OSD Remote Control PELCO-D

| BYTE I| BYTE 2| 1 BYTE 3| BYTE 4| BYTE 5| BYTE 6| BYTE 7
---|---|---|---|---|---|---|---
UP KEY| 0 x FF| Cam ID| 0 x 00| 0 x 08| 0 x 00| CNO13-0x3F| Chisum
DOWN KEY| Ox FF| Cam ID 0 x 00| 0x 1.0| 0 x 00| CNOB-0x3F| Chisum
LEFT KEY| 0 x FF| Cam ID 0 x 00| 0 x 04| OxOB-Ox3F 1 0 x 00| Chisum
RIGHT KEY| Ox FF| Cam 10 I 0 x 00| 0 x 02| Ox0B-Ox3F| 0 x 00| Chk5um
MENU ENTER KEY| DxFF| Cam 10| 0x00| Ox07| Ox 00| 0 x 5F| Chisum

-Cam ID : 0Χ00~0Χ1F
-ChkSum:The Check Sum is the 8 but (modulo 256) sum of the payload bytes (Byte2~Byte6) in the command.
-⌈0Χ0A~0Χ3F⌉ means acceft any value (between 0Χ0A~0Χ3F) on command action.

PELCO-P

| BYTE 11 BYTE 2| BYTE 3| BYTE 4| BYTE S| BYTE 6| BYTE 7| BYTE 8
---|---|---|---|---|---|---|---
UP KEY| 0 x AO ‘Cam ID| 0x00| 0 x 08| 0 x 00| Ox0B-0x3F| OxAF| Chisum
DOWN KEY| 0 x AO Cam ID| 0x00| 0x10| 0 x 00| Ox0B-0x3F| OxAF| Chisum
LEFT KEY| 0 x AO Cam ID| 0 x 00| 0 x 04| Ox0B-0x3F| 0 x 00| OxAF| Chisum
RIGHT KEY| 0 x AO Cam ID| 0 x 00| 0 x 02| Ox0B-0x3F| 0 x 00| OxAF| Chisum
MENU ENTER KEY| OxAU CamID| Ox00| Ox 07| Ox00| Ox 5F| OxAF| Chisum

-Cam ID :0Χ00~0Χ1F
-ChkSum :The Check Sum is an XOR sum of Bytel~Byte7
-⌈0Χ0A~0Χ3F⌉means accept any value (between 0Χ0A~0Χ3F)on command action.

Sales +44(0)1707 330541
Enquiries sales@genieproducts.co.uk
Website www.genieproducts.co.uk