Hanwha Techwin SBP-300KM1 (IVORY) Pole Mount Adaptor Instruction Manual

June 13, 2024
Hanwha Techwin

Hanwha Techwin SBP-300KM1 (IVORY) Pole Mount Adaptor Instruction Manual
Hanwha Techwin SBP-300KM1 \(IVORY\) Pole Mount
Adaptor

Package

SBP-300KM1/SBP-300KMW1

  • STAINLESS BOLT (M10XL30) / 4EA

  • SPRING WASHER / 4EA

  • PLAIN WASHER / 4EA

  • CORNER MOUNT ADAPTOR
    Package Content

SBP-300PM1/SBP-300PMW1

  • STAINLESS STEEL MOUNT STRAP / 2EA

  • STAINLESS BOLT (M10XL30) / 4EA

  • SPRING WASHER / 4EA

    • PLAIN WASHER / 4EA
  • POLE MOUNT ADAPTOR
    Package Content

Product Overview

SBP-300KM1/SBP-300KMW10: This is an adaptor that is used to install the Wall Mount Adaptor in a corner of the wall.
SBP-300PM1/SBP-300PMW1/SBP-300PMB1: This product is used to install the Wall
Mount Adaptor onto a pole of at least 80 mm in diameter.

Installation Precautions

  • Make sure that the installation place can endure at least 4 times of the total weight of the Corner/Pole Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
  • Each anchor bolt to use must be capable of withstanding an extraction force of 700 kg.
  • When installing the product outdoors, use interlocking devices made of stainless steel.
  • This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
  • If you install the Corner Mount Adaptor on a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.

Installation

SBP-300KM1/SBP-300KMW1

  1. Mark and drill 8 holes into the Corner Mount Adaptor where you will insert the Anchor Bolts or Nuts (M10), and fasten the Corner Mount Adaptor with the Bolts, plain and spring washers.
  2. Insert the cables through the Corner Mount Adaptor.
  3. Use the provided Bolts, Spring Washers and Plain Washers to mount the Wall Mount Adaptor onto the product.
    • For more information, refer to the installation guide of the Wall Mount Adaptor.
      Installation

SBP-300PM1/SBP-300PMW1/SBP-300PMB1

  1. Select a pole to install and confirm the installation height.
  2. Use the Stainless Steel Mounting Strap to secure the Pole Mount Adaptor to the pole.
  3. Insert the cables through the Pole Mount Adaptor.
  4. Use the provided Bolts, Spring Washers and Plain Washers to mount the Wall Mount Adaptor onto the product.
    • For more information, refer to the installation guide of the Wall Mount Adaptor.
      Installation

Hanwha Techwin Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hanwha Techwin User Manuals

Related Manuals