E-IMAGE EI7050AA Video Tripod System Owner’s Manual
- June 13, 2024
- E-IMAGE
Table of Contents
E-IMAGE EI7050AA Video Tripod System
Product Information
The EI7050AA Video Tripod System is an ideal tripod system designed specifically for lightweight and small video cameras. With its counterbalance feature, this tripod provides an easy step to enhance your video shooting experience. The head and legs of the tripod are equipped with a 65mm ball/bowl, ensuring smooth and stable movements during filming. The tripod can be extended to a maximum height of 149.5cm and can collapse down to as low as 77.5cm, making it versatile for various shooting scenarios. It has a maximum load capacity of 4kg (8.8lbs), allowing you to securely mount your equipment without any concerns. Additionally, a convenient kit bag is included to conveniently store and transport the t ipod system.
INTROCUCTION
An ideal tripod system for lightweight and small video cameras. Counterbalance is installed, the EI7050AA provides an easy step to advance your video shooting. The head and legs feature a 65mm ball/bowl. The tripod extends to a height of 149.5cm and collapses down as low as 77.5cm. Max.load is 4kg(8.8lbs). A kit bag is included.
Product Usage Instructions
- Unpack the EI7050AA Video Tripod System and ensure all components are present.
- Identify the tripod legs and the tripod head.
- Extend the tripod legs by unlocking the leg locks located near the base of each leg. Pull each leg outwards until fully extended.
- Once the legs are fully extended, lock them in place by tightening the leg locks securely.
- Locate the 65mm ball/bowl on the tripod head and ensure it is clean and free from any debris.
- Attach your lightweight or small video camera to the tripod head by aligning the camera’s mounting plate with the tripod head’s quick release plate. Slide the camera plate onto the quick release plate and secure it using the locking mechanism.
- Adjust the camera’s position and angle as desired by loosening the pan and tilt locks on the tripod head and tightening them once the desired position is achieved.
- If necessary, adjust the counterbalance feature to achieve optimal balance for your camera. This will help prevent your camera from tilting or tipping over.
- To adjust the tripod’s height, loosen the height adjustment lock located on the central column. Extend or retract the central column to reach your desired height and then tighten the lock to secure it in place.
- Once you have finished using the tripod, collapse the tripod legs by unlocking the leg locks and pushing the legs inward.
- Securely lock the collapsed legs by tightening the leg locks.
- Clean the tripod system with a soft cloth and store it in the provided kit bag for safekeeping and transportation.
Component
- Fluid head: 87050H
- Tripod: AT7402B
- Packing: SC.1
SPECIFICATION
