genie FR01W Facial Recognition Reader with 7 LCD Screen 2x 2MP Camera User Manual

Facial Recognition Reader with
7” LCD Screen and 2x 2MP
Cameras
FR01W
  User Manual

Please read these instructions carefully before operating the unit and keep for further reference.
NF4027P Facial recognition user manual V1.00

Chapter 1 introduction

1.1 Apparatus shape

1.2 Model
Black/Silver: FR01W
1.3 Application
It is suitable for office areas, hotels, access gates, office buildings, schools, shopping malls, shops, communities, public services and management projects, etc.
1.4 Feature

• Support for external HDMI large screen (only supports vertical screen);

• Dynamic dual-camera anti-counterfeiting, completely solve the deception of various photos on various carriers;

• Night infrared, RGB double fill light;

• Support external 4G network;

• Support external QR code scanner and ID card reader (currently only supports new Chinese and new ID card reader DKQ-A16D);

• Support serial port, Wiegand 26, 34 output;

• dynamic face detection and tracking recognition algorithm based on video stream;

• Supports local storage of mega-warehouses for devices, (a) Cloud platform devices support simultaneous storage of 50,000 face photos (less than 400KB), 1 million identification records (0.45KB), 20,000 live snapshots (b) LAN device Supports
  simultaneous storage of 20,000 face photos (photos calculated by 100KB) and 1 million identification records (including the latest 10,000 live capture photos);

• When the face database is 3000, and the misrecognition rate is 3/10000, the 1:N recognition accuracy rate is 99.7%;

• Fast recognition speed, (a) face tracking and detection takes about 20ms (b) face feature extraction takes about 200ms (c) living body detection face time takes 0.2ms (1000 people library, multiple recognition Average), 0.5ms (10,000 people, multiple times to average);

• Support for stranger detection, stranger level configurable;

• Support for live photo preservation when face recognition or stranger detection;

• Support public network and LAN deployment methods;

• Support HTTP interface interfacing;

• Support screen display content configuration;

• Support for recognition distance configurations.

1.5 Specification
FR01W – Facial recognition integrated terminal

Screen

| size| 7″, full viewing angle, 170°IPS LCD screen
resolution| 1024×600

Camera

| type| RGB and infrared| RGB and infrared
serial number| 02F8、02FA（discontinued）| 01F8、01FA
resolution| 200WPixel| 200WPixel
aperture| F2.4| F2.1
focal length| 5.75mm| 4.43mm
White balance| auto| auto
Wide dynamic| support| support

Vertical wide angle

| |
Horizontal wide angle| |
Core

parameter

| CPU| 4 cores, 1.8 GHz
storage| Memory 2G, storage 8G

Accessories

| Fill light| Infrared, LED fill light
Card reader

module

| U card reader (only supported by NF4027P-U)
Network

module

| Support wired, wireless (2.4GWi-Fi), wireless (4G network card,

USB external)

interface

| Audio| 1 channel audio output (line out)
video| HDMI2.0 Type-A interface 1
USB interface| USB2.0 Type-A interface 1
Serial

communication interface

| RS232 serial port, 2.5mm terminal block 4P
Relay output| 2.5mm terminal block 3P
Wiegand| 2.5mm terminal block 2P, support Wiegand 26, 34
| interface|
Reset interface| RESET hole on the back of the device
Wired network

interface

| 2.5mm terminal block 4P

function

| Face Detection| Supporting detection and tracking of 5 people at the same time
1:N face

recognition

| Under the condition of 3% misidentification rate, the recognition

accuracy rate is 99.7%.

Stranger

detection

| support
Recognition distance

configuration

| support
UI interface

configuration

| support
Remote upgrade

of equipment

| support
Deployment

method

| Support public network, LAN use

Function parameter

| Protection level| IP42
power supply| DC12V（±10% ）
Operating

temperature

| -10℃～60℃
Working

humidity

| 10%～90 %
Power

consumption

|

10W MAX

Installation

method

|

Wall bracket installation, gate bracket installation

Equipment size| 23cm11.6cm2cm
weight| ≈500g

1.6 Dimensions

Chapter 2 Installation

2.1 interface description

2.2 Installation steps

1. wiring instructions (take the power line as an example, other wiring and analogizing later)
   a) Strip the wire (using tools such as scissors) to expose the wire as shown. b) Press the orange button at each connector on the green bar to insert the wire end into the hole, then loosen the orange button to secure the wire as shown.![genie FR01W Facial Recognition Reader with 7 LCD Screen 2x 2MP Camera

• button](https://manuals.plus/wp-content/uploads/2023/09/genie-FR01W-Facial- Recognition-Reader-with-7-LCD-Screen-2x-2MP-Camera-button.jpg) **** Caution：
  If the positive and negative poles of the power cord are reversed, the device will not start; if the positive and negative poles are connected correctly, the device will start normally; the device power adapter requires 12-16V, 2A.
   Be careful not to short the positive and negative wiring, otherwise the device will not start.
   If you do not need to install the device on the wall, you can directly refer to step 6. After the device is powered on, start using the device.

  2. Place the hole paper on the wall, keep the horizontal line parallel to the ground when  pasting, and the red line is 1.4m away from the ground.
  3. Drill 3 screw holes in the wall according to the instructions of the hole paper, and open 1-2 threading holes according to the wiring requirements, and insert the rubber plugs in the accessories into the holes.
  4. According to the mounting position of the bracket, insert the green plug of the connected cable out of the outlet hole. If you need to reset the cable and HDMI cable, please pass it out from the outlet hole at this step.
  5. Move the bracket so that the three holes on the bracket align with the holes on the wall, and then secure the bracket to the wall with the self-tapping screws in the accessory.
  6. Insert the green interface into the connector on the back of the device。
  7. Screw the countersunk screw into the bracket for two turns, then align the slot under the device with the hook under the bracket. Use a hexagon socket tool or a hex driver to tighten the countersunk screw in the direction of the arrow. The installation is complete.。

Chapter 3 wiring

3.1 Material / Tool List

1

|

NF4000 Facial recognition instrument + accessories

|

1

| Self-contained accessories include: 12V adapter, wall mount bracket, expansion tube, self-tapping screws, hex wrench,

hexagon socket screws, etc.

2| Exit button (optional)| 1| Use to exit

3

|

Electromagnetic lock (optional)

|

1

| When the power is off, the door is opened, and when the power is turned on, the door

is locked

4

|

Access control power supply (optional)

|

1

| Power supply to the electromagnetic lock,

can be powered to the Keyking host at the same time

5

| Network cable (optional, device

supports Wi-Fi)

|

Several

| Used to   lay   out   Ethernet   and   other

remaining traces

6

| Cable clamp,   network   tester,

diagonal pliers, electrical tape, wire buckle

|

Several

|

Used to lay out Ethernet and other remaining traces

7| Drilling tool| Several| Used to install equipment, wiring

3.2 Interface description

3.3 Magnetic lock wiring
3.3.1 system installation diagram 

3.3.2 Magnetic lock and exit button wiring diagram

3.3.3 Magnetic Lock mechanical switch wiring diagram

3.4 Automatic induction door wiring
3.4.1 Automatic induction door system installation diagram

3.4.2 Automatic door sensor head switch wiring diagram

3.5 Precautions

1. Touch the cable inside the Exit button panel as far as possible from the center of the back of the panel.

2. In actual wiring, if the 12V power supply line of Keyking host does not use “dedicated power extension cable” and the distance is long, it will result in excessive cable equivalent resistance, which will be prone to abnormal phenomena such as insufficient
   terminal voltage (≤11V) and host. Repeated restarts, crashes, etc. The voltage measurement wiring is shown in the figure.

3. The device with a power adapter as shown in the figure, the total length is 1 meter, of which the power cable (weak power part) 40cm, the power line (strong power part) The power cable (weak power part) must not be extended by more than 2 meters.
   Otherwise, the voltage at the host terminal of the device will be insufficient, and repeated restarts and crashes will occur. If the power supply is far away from the device, extend the power cord (strong power part).
    If other adapters are used, such as 9V, 1A, the voltage is too low and the current is too small, which will cause the device to restart repeatedly.
    The cable used should not be too thin (such as a thin wire). It is recommended to connect multiple strands of the same cable or use a thick copper core cable to ensure a voltage >11V.
   note：If the network cable is used, the extension cable uses 4 strands of wire to make the positive electrode and 4 strands to make the negative electrode.
    If you are not sure how to extend it, please contact the supplier to replace the “Dedicated Power Extension Cable”.

Chapter 4 System setting

4.1 NF4027P setting
Set ip in NF4027p, make sure it is in the same IP segment with sphinx
4.2 Sphinx4.4 setting

• Communication configuration
• Add face recognition device
  setup——hardware——face recognitionAs shown in the figure below, click search, fill the IP segment that covers the NF4027P.After the device goes online:

Chapter 5 Registered

Click 【Add a Personnel】 to pop up the following window and click to add new one.

In 【Basic Information】,fill in the ID, name, department information

In【Card】, tick the 【Use Access Card】, obtain the card number through the card issuer or card reader, or manually enter the card number (card number = face recognition terminal card) in【Access Level】,tick the security groups In【Face Info】, check Use face recognition under NF1000, and check the face recognition device in the 【Device Name】box.

Chapter 6 Test

In 【Monitor】， choose【Photo Viewer】,then 【Face Recognition Viewer】,we can see the registered face and the new coming face .

If the recognition is Successful , the state is true.

Sales +44(0)1707 330541
Enquiries sales@genieproducts.co.uk
Website www.genieproducts.co.uk

References

• Home - Genie Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>