HYPER GO 14209 1:14 RC High Speed Car User Manual

HYPER GO 14209 1:14 RC High Speed Car

Product Information

• Product Name: 1:14 RC High-Speed Car
• Product Model No.: 14209
• Age Recommendation: 14+
• User Manual Version: V2.0

Manufacturer’s Note : The instruction sheet provided is for reference only. The manufacturer reserves the right to make changes or adjustments to the product without prior notification. Please refer to the official information.

Warnings & Cautions

• Choking hazard! This product contains small parts. NOT suitable for children under 3 years.
• Contains electrical components and should be kept dry at all times.
• Regularly check the battery charger wires, plugs, shell, and other components for damage. DO NOT use if any part is damaged.
• If the battery shows any deformation, please stop using.
• If the model is not used for a long time, raise the chassis to let the wheels hang in the air.

Precautions for Battery Use

1. The transmitter requires 2×1.5V AA batteries.
2. Pay attention to the correct polarity when replacing batteries.
3. Rechargeable batteries should be charged under adult supervision.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

Safety Precautions

• This product is a radio control model, not a toy.
• The assembly must be completed before operation.
• Perform routine maintenance work after operation.
• Replacement parts and option parts are available separately.
• Improper usage with alkaline cells or rechargeable batteries may damage the electronics of the car or the radio.

The instruction sheet for this product is just for your reference. We reserve the right to make changes or adjustments on the product without prior notification. Please refer to the official information.

Warning
Choking hazard! This product contains small parts. NOT suitable for children under 3 years. Contains electrical components and should be kept dry at all times. Regularly check the battery charger wires, plugs and shell, and other components for damage. DO NOT use if any part is damaged.

Warnings & Cautions

1. Detachable small parts should be stored safely and out of reach of children.

2. If interference is experienced, turn the model off and try it again in a different area.

3. The transmitter will not function correctly if the batteries are low. Please replace the batteries.

4. Please discard old/used batteries in a safe manner. Consider your environment!

5. Please store the remote control model in a cool, dry place.

6. DO NOT expose to fire or high temperatures, do not store in a moist place.

7. Once the battery gets wet, wipe immediately with a soft dry cloth.
   If the battery has any deformation, please stop using.

8. If you don’t use the model for a long time, please raise the chassis to let the wheels hang in the air.

Precautions for Battery Use

1. The transmitter uses 2×1.5V “AA” batteries.
2. Please pay attention to correct polarity when replacing batteries.
3. Rechargeable batteries should be charged under adult supervision.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
5. After the battery is exhausted, the model should be removed.
6. Exhaust batteries should be safely disposed of!
7. DO NOT short-circuit any terminals.
8. DO NOT attempt to recharge non-rechargeable batteries.
9. Remove batteries from the model when charging.
10. DO NOT put batteries into a fire or into water.
11. The rated input voltage battery charger MUST be suitable for your main power voltage.
12. During charging it is quite normal for the charger and batteries to heat up.
13. Do not swallow battery!
14. Store only in cool, dry, and dark places, and should be kept out of the children!
15. When the battery leaks the liquid and lets it into your eyes, please right away rinse them and consult an ophthalmologist.

• It is a radio control model, not a toy!
• In order to enjoy running the car, you need to finish assembly before operation. Do routine maintenance work after operation. Replacement parts and option parts are available separately.
• Improper usage with Alkaline cells or rechargeable batteries may damage the electronics for the car or the radio.
  In order to operate the car safely. Be sure that you have observed the following points:

WARNING: Please follow the points as below in order to prevent accident from happening to the car and people.

• Be sure to read thoroughly the manual before you begin. Fresh user should seek advice from people having rich experience in order to assemble the model correctly.
• Cutters, nippers and screwdrivers need careful handling.
• As the product contains small and sharp parts, assemble and store this product only in places out of the reach of children.
• Do not expose this model to high temperature, humidity or direct sunlight.
• Never reverse the connection/ disassemble the battery. This may lead to damage and leakage.
• When the model is not in use, always turn off the receiver and transmitter. Furthermore, disconnect the batteries and remove them from the model and the transmitter. This may be dangerous such as overheating and leakage.

Operating Your Model Safely

WARNING: Do NOT operate the model in the following places and situations. (Non-observance may lead to accident!)

• Operate your model in spacious and safe areas! Do not operate it:
  • On road!
  • In places where children and many people gather.
  • In residential districts and parks!
  • Do not operate the model on public roads, in crowded places, and near infants as it may cause accidents.
  • Indoors and in limited space! Non-observance may result in personal injury and property damage!
• The car must stop immediately and check for the reasons why it is operating abnormally. As long as the problem is not cleared, do NOT operate it! This may lead to further trouble and unforeseen accidents!
• Always check the radio batteries! With weak dry batteries, transmission and reception of the radio would fall off. You may lose control of your model in such a condition. This may also cause serious accidents!
• Keep in mind that people around you may also operate a radio control model! NEVER share the same frequency with somebody else at the same time! Otherwise, Radio signals will be mixed up and you will lose control of your model. This may lead to accidents.
• Do NOT put fingers or any objects inside rotating and moving parts!
• Right after use, do NOT touch the motor! The danger of burning yourself

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Power Switch

1. Turn on the power switch of the transmitter, and the signal indicator light of the transmitter flashes.
2. Press the power button of the high-speed car, which is on the side of the ESC; the indicator light of the high-speed car flashes.
3. When the indicator light stays on, the high-speed car can be operated to play.

• When turning on the transmitter, please DO NOT touch the throttle and steering. After turning on the transmitter’s power, please operate after the indicator light of the transmitter stays on.
• Please comply with the principle of “turn on the transmitter first, then turn on the high-speed car”.
• In the frequency matching, please make sure there is only one pair of transmitter and high-speed car matching at the same time, otherwise, the frequency will match wrongly.

R30 Receiver

Warning: Please make sure the connection is correct.

E45AZ Brushless ESC
WARNING: Please Do Not forcible/reversely insert all sockets.

• VCC: Powered by battery circuit. Provide the same voltage as the connected battery. It can be used as cooling fan power. Please make sure the battery voltage of the ESC is in the range of fans.
• BVD: Receivers with BVD function can be directly connected to this interface through an adapter cable, which is equivalent to connecting a battery.

T3B Transmitter

1. ST.TRIM (Steering servo trimmer.
2. TH.TRIM (Throttle trimmer
3. Power/Speed switch
4. Indicator light
5. CH1：ST (Steering
6. CH2：TH (Throttle
7. Fn (CH3 Light control
   Short Press the “ ” button to turn on/off the light of the high-speed car.

Install the Transmitter’s Battery

Open the transmitter’s battery cover, insert 2 AA batteries according to the indicated positive and negative direction, close the battery cover.

Install the Battery

1. Unlock the fixing tape
2. Insert the battery into the battery box, make sure it’s in place;
3. Tighten the battery with the fixing tape;
4. Connect the receiver plug to the battery

Charge

If charging with a 5V 2A USB adapter.

• When charging, the indicator light of charger is green and flashes;
• When the battery is fully charged, the green indicator light of the charger stays on.

The above charging time data is based on the test result of 5V 2A adapter. Using different specifications of adapters or power supply equipment will affect the actual charging time. It is recommended to use a 5V 2A adapter for charging.

Install Car Shell

1. Aline the 4 holes of the car shell with holders, then install it.
2. Insert the 4 clips into the holes to lock the car body.
   14200B Front Swing Set 14201B Rear Swing Set14400G Metal Gears Main Driving Set 16420G Gears Diff AssemblyESC Fan14510B Oil Filled ShockB2852A & 16397 Motor Assembly 14430B Steering Assembly14100B Front Bumper Assembly14700B Servo AssemblyHigh Speed Car Assemble

Spare Parts

MADE IN CHINA
Instructions must be retained since it contain important information

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>