BOOMPODS HALO Powerful 12 Watt Stereo Wireless Speaker User Manual
- June 13, 2024
- Boompods
Table of Contents
BOOMPODS HALO Powerful 12 Watt Stereo Wireless Speaker
In the Box
Controls
-
Long press 2s: Power on/off
Short press one time: Play/Pause/Pick up/Hang up Short press twice: Switch LED lighting mode
Short press 3 times: Protect call privacy/Reject incoming call/TWS connect/disconnect -
Short press one time: Volume UP
Long press 2s: Next song -
Short press one time: Volume DOWN
Long press 2s: Previous song
Long press 2s at the same time: Turn ON/OFF SOS light -
Status indicator – Charging/ bluetooth
-
Type-C Charging port
-
Calling MIC
-
LED HALO light
How to Connect
Switch ON
blue Bluetooth indicator will flash, Choose “HALO” from your device menu, Wait
until you hear tone prompt, You are now connected,
Pair 2
If you have already paired to your phone with 1 speaker, its best to delete from your Bluetooth menu first and start fresh.
switch on both speakers.
press 3 times on one speaker.
wait to hear a “DU” sound, you are now paired. play as normal.
Charging
Use supplied USB-C charging cable
Use an output source 5V/2A (or above)
Charge when you hear low battery prompt tone or the indicator flash red. The
red indicator will be normally on while charging and switch off after fully
charged.
Specifications
Look after me
- Please read this manual carefully before use and keep it safe.
- First time use, please fully charge.
- Use certified adapter that has passed national safety certification.
- Charge at least once a month to maintain performance.
- Do not use in extremely hot or cold environments, temperature beyonds 5 ℃-35℃. If used beyond the above range, the product may stop automatically to protect the internal circuit.
- When charging in high temperature environments, the product may automatically stop charging to protect the battery. At this time, the charging indicator usually flashes quickly to indicate that the charging environmental temperature or the product internal temperature is too high.
- Storage environment temperature: -5～35℃ RH＜70% (recommended 20℃±5).
Important safety instructions
- Do not disassemble or repair this speaker personally, otherwise it may cause product damage or personal injury.
- Do not use it in dusty, humid, dry, and high-temperature environments.
- Do not place this product near a heat source, or a place with direct sunlight.
- lots of dust, or mechanical vibration.
- Do not exceed the IPX5 waterproof rating parameters.
- When the product is fully charged, remove from charging.
- The maximum ambient temperature should not exceed 40°C.
*This speaker supports mobile phones/ tablets/ PCs etc. Here this User Manual is illustrated base on mobile phones.