APPASO 15-LHDY0201BE Bar Sink Faucet Brushed Nickel Kitchen Faucet Instructions

June 13, 2024
APPASO


APPASO 15-LHDY0201BE Bar Sink Faucet Brushed Nickel Kitchen Faucet
1


KITCHEN TAP

INSTRUCTION

Message cs@appaso.com

APPASO Certi 1

PRODUCT COMPONENTS

(1)APPASO 15-LHDY0201BE Bar Sink A1 (2) (3) (4) (5) (6)

WARM TIP

The gravity ball must be installed

INSTALLATION DIMENSIONS

APPASO 15-LHDY0201BE Bar Sink Faucet Brushed Nickel Kitchen Faucet
3

  1. Max:1.57″ (40mm) Thickness
  2. Max:1.25″-1.37″ (Φ32mm-Φ35mm) Installation size
  3. G 3/8 or G 1/2
INSTALLATION TOOLS
INSTALLATION NOTES

Please rinse the pipe system before and after the installation

INSTALLATION STEPS
  1. MIN 3-9/10″ (100mm)
  2. MIN Φ1.25″-Φ1-37″ (Φ32-Φ35mm)
MAINTENANCE

QUICK CLEAN

FLOW DIAGRAM

Q = L/min

SPECIFICATION

Application
Do not connect the faucet to non-pressure heater; Use in indoor public places and normal residential.

Specifications
Minimum Fluid pressure: 0.05MPa/7.2Psi
Recommended Fluid pressure: 0.1-0.5MPa/14.5-72.5Psi
Working pressure: Max.1.0MPa/145Psi
Test pressure: 1.6MPa/232Psi
Max. hot water temperature: 90°C/194°F
Recommended Hot water: 60°C/140°F
Environment temperature: 5°C-45°F/41°F-113°F

Relief valves must be installed when static pressure exceeds 0.5 MPA to avoid wide variance in hot and cold water supply.

Function
Check the connector about leakage and the function of faucet.

Maintenance
Check and clean all the components regularly, change it if necessary. Please turn off your water supply system during maintenance work.

Note
When install the valve core, make sure the seals are installed correctly. Tighten the screw alternately and evenly.

DAILY MAINTENANCE

CAUTION: Always turn off your water supply when changing or disassembling the faucet. Then turn on you faucet to release the water pressure and check if the water is shut off completely.

**** To keep the surface bright and clean, please clean your faucet regularly by the following procedures:

  1. Use clean water and soft cloth to remove the dirt on the surface.

  2. Use any cleaners in the following to remove the dirt on the surface.
    Soft liquid cleaner.
    Colorless glass cleaner, not abrasive and can be completely dissolved powdery cleaner (mixed by instruction).
    Clean liquid that are abrasive.
    Do not use the cleaner, gauze, or tissues that are abrasive.
    **** Do not use the cleaner that are corrosive, or other rough cleaners or soap!

  3. Please use clean water to flush the detergent and soft cloth to dry after cleaning.

  4. Disassemble the faucet aerator and clean it regularly to reduce the impurities.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals