Safety 1st 3202008000 Outsmart Multi Use Lock User Guide

: June 13, 2024
: Safety 1st

Table of Contents

Features
To install
To use
To clean
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DOREL BELGIUM
BITM Brussels International Trade Mart
Atomiumsquare 1, BP 177 – 1020 Brussels
BELGIQUE / BELGIE
014 3640 01
Made in China

OUTSMART™ MULTI-USE LOCK 3202008000

Thank you for purchasing this Multi-Use Lock. We’re proud to be your choice for safeguarding your child’s environment.

Features

NOTE: This product has a two unique features that help to redirect and distract your child’s attention. A – The functional buttons are hidden underneath a ﬂexible over mold. B -The decoy button is non-functioning. C -Mounting Plate. D – Lock Housing. E – Pivot Housing. Safety 1st 3202008000
Outsmart Multi Use Lock

WARNING: Do not use this product to guard against toxic and dangerous substances, or sharp-edged or pointed objects. Such materials should always be placed “high up” or otherwise made completely inaccessible to children.

ADULT INSTALLATION REQUIRED.

CAUTION: This locking device restricts access by young children to the contents of a cupboard or drawer but cannot ensure absolute child safety. It is not a substitute for proper adult supervision. Replace the device if any part is broken, torn or missing. Not suitable for stoves and ovens, as a window lock or for use on interior or exterior doors. When possible install out of reach of children. These products are not toys. DO NOT allow children to play with them. FOR INDOOR HOME USE ONLY.
IMPORTANT SAFETY INFORMATION
Check for security after installation. Discontinue use when your child becomes old enough to defeat it. Your child will eventually be able to defeat this product. To keep this product effective for as long as possible, avoid letting children see how you operate child safety devices. Watching you disengage a lock, latch or cover could enable them to learn sooner how to defeat it.
BEFORE YOU BEGIN
Read this instruction carefully before mounting and using the device.
The child protective function of the device may be affected if you do not follow the instructions. Keep the instructions for future reference. Remove all contents from packaging and discard box following the local sorting instructions. Lay out
and identify all parts. If any parts are missing, please contact us on our website www.safety1st.com.

To install

– BEFORE YOU BEGIN: Clean and dry the contact surfaces.
Determine the location where you will install the Secret Button Multi-Use Lock: With paper still on adhesive, position the LOCK HOUSING to the front surface of the appliance or cabinetry being secured and determine where the PIVOT HOUSING will be
positioned on the side surface (Figure A).
– Remove the adhesive paper from the PIVOT HOUSING and adhere to side surface (Figure B).
A: Pivot Housing + Lock Housing
B: Pivot Housing
C: Less than 1”
– Holding the LOCK HOUSING in position on the front surface, test to ensure the item you are securing cannot open more than 1” (Figure C).
– With LOCK HOUSING attached to the MOUNTING PLATE, remove adhesive paper from the MOUNTING PLATE and install in the predetermined position on the front surface.
NOTE: Allow adhesive to cure for 24 hours before use.

To use

Check regularly that the device is functioning properly.
To Remove Permanently:
NOTE: Lock is unusable after permanent removal. Disengage Lock per Step 1 in TO USE. Carefully slide dental ﬂoss between adhesive and contact surface to release. Wipe off adhesive with a soft cloth and warm soapy water or roll adhesive off of surface with ﬁngers and clean the surface according to manufacturer’s recommendations.
D: Open lock by pressing top and bottom buttons to release LOCK HOUSING (Figures D and D1).
E: To secure your appliance or cabinetry, snap LOCK HOUSING back onto MOUNTING PLATE (Figure E).