OLIGHT Olantern Music Two-in-One Classic Camping Light User Manual

OLIGHT Olantern Music Two-in-One Classic Camping Light

IN THE BOX

SPECIFICATIONS

Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference. The tests are performed indoors under a room temperature of 25 degrees celsius with windless conditions. The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the results of testing.

CHARGING

The product was set to be in lockout mode before delivery. Please unlock and fully charge it before first use.
Connect the provided USB cable to a power with a Type-C interface (the power is not included in this product, you can use a USB power adapter or a power bank from your cell phone and digital products, and a USB power with a power of 18W (5V/3A, 9V/2A, 12V/1.5A) or more can provide the best charging efficiency), open the dust plug that shields the USB-C charging port of the product, and then insert the other end of the cable into the USB-C charging port.

Red indicator means the charging is ongoing, and green indicator means it’s fully charged (battery power is over 95%). It takes no more than 4 hours to fully charge the light.

NOTE:

1. Best charging efficiency with a 18W or higher-capacity power source.
2. When the product is in lockout mode, it will automatically unlock as soon as it’s connected to a charger.

POWER BANK FUNCTION

Built-in with a 11200mAh battery pack consisting of 4 Li-ion batteries, it can charge phones and other digital devices.

PRODUCT OVERVIEW

BATTERY LEVEL INDICATOR

While activated (Light/Stereo/USB Discharge/ Light+Stereo):
The indicator will turn on for 5 seconds after any operation and will automatically turn off if there is no further activity.

While Charging:
The indicator displays the remaining battery level and turns off 5 minutes after charging begins.
During charging, the indicator is red and rotates clockwise, then turns green when charging is complete.

Button:
When the button is pressed, the corresponding position of the light circle will light up in white, and it will restore when it is released.

Button Lockout:
The red light will turn on during operation and automatically turn off after 5 seconds.

OPERATION INSTRUCTIONS

Lockout/Unlock: Firstly, ensure that you press and hold the knob to turn it off. Then press and hold the light button for 2 seconds to enter the lockout state, and press and hold the light button for 2 seconds again to unlock and then enter the low warm light. In the lockout state, it will be automatically unlocked when charging.

1. Knob
   Knob: Press and hold the knob to turn off.
   Brightness Adjustment : A stepless dimming is adopted, the warm light becomes gradually the brightest from the lowest until the warm light is off but the white light is on at the lowest brightness, and you can continue to turn the knob until the white light is the brightest. Turn the knob anti-clockwise, the light mode and brightness are contrary to the above.

2. Music play/pause button
   While the music is playing, single press to play or pause.

3. Decrease the volume
   Press to decrease the volume.

4. Increase the volume
   Press to increase the volume.

5. Light on/off button
   When the Bluetooth is not connected, single press the light button to turn on or off the light. In the state of Bluetooth connection, single press the light button, and the light will operate in a cycle of on-rhythm mode-off-on.

6. Bluetooth button
   Single press to turn on the Bluetooth function. In the state of Bluetooth connection, press and hold to disconnect the
   Bluetooth connection, and press it again to automatically reconnect. The default volume of the Bluetooth connection is 40%. If it is disconnected because of a long distance, it will automatically reconnect within 8 minutes. After
   turning on the Bluetooth for 10 minutes, it will automatically turn off if not connecting to the Bluetooth.

7. Interconnection button

8. TWS mode
   On/Off: When Bluetooth is on, single press to turn on or off the TWS function (prompt tone). If the TWS function is not successfully paired within 30 seconds after it is turned on, it will be automatically turned off. The device will be memorized after pairing successfully.
   TWS connection method 1: When both products turn on Bluetooth and are not connected to the mobile phone, press the interconnection button of any product to start pairing, and then connect to the mobile phone after pairing is complete.
   TWS connection method 2: Connect any one product to a mobile phone, and press the interconnection button to enter the TWS mode. And then the other one turns on Bluetooth.

9. Stereo broadcast mode:(This function supports the interconnection of 100+ stereos.)
   Turn on broadcast mode: Firstly, ensure that Bluetooth is on, then connect the host device to your mobile phone.
   Finally, press and hold the interconnection button to enter broadcast mode.

Sub-device connection : Firstly, ensure that Bluetooth is on, then press and hold the interconnection button to start pairing.
Exit the broadcast mode: Long press the interconnection button on the host device to exit all sub-devices; long press the interconnection button on the sub-device to exit it only. This function is deactivated automatically after the power is off. The non-interconnection mode is activated by default after powering on again.

DANGER DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.

WARNING

• DO NOT store the product in the car or any place where the temperature may exceed 60℃.
• Fully charge the battery before storing the light for a long period of time.
• When the charging port is not in use, please keep the dust plug inserted to prevent dust or foreign matters from entering.
• DO NOT place the product in any dusty environment. Otherwise, the dust may enter the rotary knob switch and cause it to malfunction.
• DO NOT disassemble the product.
• DO NOT immerse the product in seawater or other corrosive media to avoid damage to the product.
• Please prevent it from falling and handle it with care.

NOTICE

• Best charging efficiency with a 18W or higher-capacity power source.
• Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
• The vintage copper color is a result of aging craftsmanship. The uneven color is normal.
• After the high white light is turned on for 15 minutes, the brightness will slowly step down to 50% within 3 minutes.
• When the battery level is less than 40%, its volume is capped at 60%; when the battery level is less than 25%, its volume is capped at 30%.
• Fast charge/discharge function is deactivated when the stereo is turned on.

BUTTON BACKLIGHT

• All backlights will turn on for 5 seconds after vibration and automatically turn off after 5 seconds if there is no further activity.
• When the product is powered on, the backlight will turn on for 5 seconds during operation and automatically turn off after 5 seconds of inactivity.
• Bluetooth button backlight: It will remain on constantly when connected and flash when not connected.
• Interconnection button backlight: It will flash when not connected, and when connected, the button backlight of the host device will remain constantly on while the button backlight of the sub-device willbe turned off.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

WARRANTY

Within 30 days of purchase : Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.

USA Customer Support: cs@olightstore.com
Global Customer Support: contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>