VEVOR Pipe Inspection System Instruction Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR Pipe Inspection System
Attentions
- Please read the manual carefully before using it.
- Handle it carefully during operation, avoid throwing down or pressing it heavily.
- If the users disassemble or deliberately damage the machine, it will beyond the warranty.
- please keep distance from the system when charging
- After being used, turn off the display and pull out all the connection joints.
- Due to the version upgrades，if mentioned in this manual content does not accord with your machine, please refer to our machine.
Description
- Color TFT LCD Screen.
- High resolution camera,clear picture,
- Night vision.
- High quality special cable, waterproof and anti-corrosion/cold/tensile.
- Lithium battery.
- The lights can on/off.night lights adjustable.
- Range of Application：Water-supply pipe、Air-conditioner pipe、Cable pipe、Pipeline vacuum system、PLUNBIN pipe、Buildings、Sunken pipe.
Product Specification
- Item: parameter
- Charger: AC100-240V
- Battery: Lithium battery
- Investigation depth: 10M( selectable line length)
- Material: Fiber tube with /high intensity
- Camera light source: With high while light
- Camera material: Stainless steel
- Menu languages: Multi-language
- Camera picture: Color
Instruction for Product
Camera (A)
- metal contact chip
- spring
- highlight white LED
- camera lens
Product Specification
- Item: parameter
- Camera diameter: 23MM
- With the tube diameter: >25MM
- Camera light source: 12 LED with high while light(adjustable)
- Camera working voltage: 5V
- Lights working voltage: 12V
- Water proof: IP68
- Camera material: stainless steel
- Camera size: 23MM
- Camera protective cover parts material: plastic-steel
- Camera protective cover parts size 1: 29MM* 40MM
Camera (B)
- metal contact chip
- spring
- highlight white LED
- camera lens
Product Specification
- Item: parameter
- Camera diameter: 17MM
- With the tube diameter: >18MM
- Camera light source: 6 LED with high while light(adjustable)
- Camera working voltage: 5V
- Lights working voltage: 12V
- Water proof: IP68
- Camera material: stainless steel
- Camera size: 100MM* 17MM
- Camera protective cover parts material: metal
- Camera protective cover parts size: 20MM* 25MM
Camera(C)
- highlight white LED
- camera lens
Product Specification
- Item: parameter
- Camera diameter: 6.5MM
- With the tube diameter: 7-30MM
- Camera visual distance: 10-80MM (approximate)
- Camera light source: 6 LED with high while light(adjustable)
- Camera working voltage: 3.3V
- Lights working voltage: 3.3V
- Water proof: no
- Camera material: stainless steel
- Camera size: 45MM* 6.5MM
- Camera protective cover parts material: metal
- Camera protective cover parts size: 45MM* 15MM
Monitor
Monitor（Commom Type）
Monitor（Recording Type）
HD 4.3inch LCD display with DVR Recording Function
Coil
Install the monitor
System Installation
- Vital: turn off the power switch, connect the video camera and the monitor, or the video camera and the monitor may be damaged.
- Connect camera -coil -monitor .
- Turn on the power switch in the power box, the switchboard starts.
- Install the video camera with the protective cover slightly and put it into the pipe, rotate coil to proper depth.
- Adjust LED light degree adjuster to proper light degree.
- After utilization, mover the camera from the pipe carefully, take clean, soft and dry cloth to clear up it and put it back.
PRODUCT CONNECTION
Product components and accessories
Charging
When the battery power is low, it needs charging, and the method is as below:
- Take out the battery and charger from the box.
- Connect the charger to the battery.
- Connect the charger to the alternating current of 100-240v. The red indicator means charging.
- The green indicator means finishing charging.
Notes: to make sure the battery using age longer, please recharge it timely; otherwise, it will make it can not recharged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>