Mean Well PWM-40 Series Constant Voltage LED Driver Owner’s Manual

Mean Well PWM-40 Series Constant Voltage LED Driver Owner’s Manual

Features

• Constant Voltage PWM style output with frequency 1.47kHz
• Plastic housing with class II design
• Built-in active PFC function
• Class 2 power unit
• No load power consumption <0.5W
• Fully encapsulated with IP67 level
• Function: 3 in 1 dimming (dim-to-off)
• Typical lifetime>50000 hours
• 5 years warranty

Applications

• LED strip lighting Indoor LED lighting
• LED decorative lighting
• LED architecture lighting
• Type “HL” for use in Class I, Division 2 hazardous (Classified) location.

Description

PWM-40 series is a40W LED AC/DC LED driver featuring the constant voltage mode with PWM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips. PWM-40 operates from 90~305VAC and offers models with different rated voltage ranging between 12V and 48V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -40°C ~ +85°C case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for dry, damp or wet locations. PWM 40 is equipped with dimming function that varies the duty cycle of the output, providing great flexibility for LED strips applications.

Model Encoding

SPECIFICATION

MODEL| PNINO.12| P1111-4 ► -24| PIVIS4 ► 311| Pfl1048
---|---|---|---|---
DC VOLTAGE| IN| 2W| 3W| ASV
RATED CURRENTRATED ROMER| 3.3A| I VA| I’M| 034A
40.011V| CAW                                140.32W| 4032W
OUTPUTINPUT| DIMMNG RANGE Pa FREOGENCY ITyp )| 0 • IGO%
1471012
SETUP. RISE TIME NH42| SCCWA. am 115VAC inovx
HOLD UP TIME (Typ.1| ISmul 1 SVACor 230VAC
VOLTAGE RANGE Noe 3| 9D • X4VAG                    127.- 4.31VDC(NMI. Nig lo ‘STATIC CHARACTERISTIC Hot0o)
FREQUENCY RANGE| 47. EONE
POWER FACTOR MP.)| PF )0 971i5VAC,PFX) 99230VAC, pp.° 92/2/NAC 0 wow {pm, re,e, io-pollER FACTOR (PFICHARACTERISTIG– soc100)
Nut Haim cincinim| T/ICW 20‘44004a60%1115VAC. 230VAC. (810•275%277WW) (Pee se ceder lo “WTALHARAIONIC DISTORTION’ sesta)
EFFICIENCY (Typ)| NA                                     I40% 190%                                                                  190%
AC CURRENT (1)43| 0 6A / 115VAC                        03Af AMC 025A/ 271VAC
| INRUSH CURRENT (Typ)| COW START !CIAO. et1)42704 Freastrwl 4150% Doak) X MAC . Pot ALA 410
IMMO. ofPSUA on IPA CIRCUIT BREAKER| Surds loyal tales cage D3118,4112 IdroAtcoals ce twee I al =DSC
LEAKAGE CURRENT| 40 254M t 277VAC
11)L0A01011111CCINUICIICII| 405V/
| | 108 – ISO% raled otNul wiser
OVERLOAD| Nccup crow. tv.omrt aiunargaly after HO: coldam 0 tosoid
SHORT CACUIT| Station otprollage. remaker on to recover
wCICTCROVER VOLTAGE| T5 – IN i 23- 34V                                                             141-463/ I S4 – GOV
SW Oman oIrm volipt. ro-pcmsteco lo recant
OVER TEMPERATUITE| SlotTlownotp Whigs. rmpowsrOmtornover
we RKING TEAT.| TCPW-40• 035C (PIONVOIN10•01.11PUT LOAD 3S TELPERATURE’SectOnl
MAX CASE TEAT.| Tessen85t
we RIONG mu IA iDaiEl‘ R:1/411- STCRAGE TOP HUMIDITY TEMP COEFFICIENT| 20-95%RH non-condenting
.40• •95D. 10 – 115%RH
±003%t (0 – SVC)
%AERATION| 10 .500H2. 5G12Mittkyde. plrbdlOt MA OkkabilD X.Y.Z NMI
•SA FE re reAOAROS Mal| UL6750( WEN!: I. LILO/WI.% 12V24V only).CSA G222 No no 13.12.ENEC DS ENEN61117-1.BS EN,EN61347.2.11reepulaenteS DOEN32388. IPOUNS !DISUSE tor 12V.24V ordy1.EAC IP TC M. G919510.1.GB19S10.11 approved : Devgn refer io 8S EN/EN60335.1
WITHSTAND VOLTAGE| PROMS 7$10/AC
SA.EMC F Tr .5;SO,ATION RESISTANCE| IiP.09 TOM One i %WPC o 25t/70%RH
ENO EMISSION IN40| OCHPLOAN 10 BS ENENSIOTS.E4 ENIENET00632 Oasis C ((Pad:60%1;8S EMEN6101:033.0117143 and G11178251. EAC TP TC620
| CNC IIAVUNITY| co■Nlanas to RS ENFN61000-4.2,343.6 8.11:8$ EMEINISIT.NN nIustri lead [oar organ(); lers4.04210),EAC IP IC 020
| MT&| ‘Kotula No          Telma SR-332 (IIIIONO): 270.021088 St                        INS410811-21EF are)
| DIMENSION| 1501315min (LWHI
1| KCMG| 0.104311poscIDED911 OUST
I. /spay nag’s NOT spxam angoras Pa nattscral at 2:0VAC cu. roununin am 95l Of tria•ft tantiva.ra2. °mon”; nu,. 13.•.se van lee owl )ehs.’, Paw et krSTATIC CHARACTBISTC–sscHnoo• emaY.. 3. LANnci ma ut Ina n rnnand al hal ntO sral Ty…NOHOW ?.ew nay WPM anal cf In v.. ,4, kn.,4. Tr 00.4vut tcnatkvad at a arconan rd.. be cowed in anonym %in niM cOJINHHI Sx.EACPOrm(04.4 to Woad ty Pa congnna nna Incr. Xba tnal °canna minaactuIrs nua incadip DC PAWS On IN caftans rnIalalcn apart5. WES :Vet ma,. re tnt:s IN opxrzect ot 10 003 bass or cor4to, vow, Tata oinalary Om ro, D.r. ocr CLCI at SPA Mt a lea B. Mmt“ tOn so Ix nananp flatorma Or PEAS wan mist no Si IPp.’.‘rnwrreannatzem 7. TN antotn InTpparwo tarp V 35 noon Sr, Irkia trtpdt ard CO Si .1(00m sera, nowni, conivo aim wog run 2000,05CON.8 Car/ xaoto,,on aro IP War ON,V.:X., ntrUia10, ca.eln. ram Hoe Qv vx, MinAl WOO uant Mx. wx. –ca,not conOtkpataCat tED MCC/M Preen brow osanter I C. PIPPO nPriela:n tante “Kn.» pets. :A.. enw…et comxrecez. new >co

DIMMING OPERATION

Dimming principle for PWM style output

• Dimming is achieved by varying the duty cycle of the output current.
  

3in 1 dimming function (for Blank-Type)

• Apply one of the three methodologies between DIM+ and DIM-: 0~ 10VDC, or 10V PWM signal or resistance.
• Dimming source current from power supply: 1004A (typ.)

Applying additive 0~ 10VDC

Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

Applying additive resistance:

Note:

1. Min. duty cycle of output current is about 6% and the output current is not defined when 0%< Iout<6%.
2. The duty cycle of output current could drop down to 0% when dimming input is about 0k or 0Vde, or 10V PWM signal with 0% duty cycle.

OUTPUT LOAD vs TEMPERATURE

AMBIENT TEMPERATURE,Ta (C)

Tease (C)

STATIC CHARACTERISTIC

INPUT VOLTAGE (V) 60Hz

De-rating is needed under low input voltage.

POWER FACTOR (PF) CHARACTERISTIC

24V Model, Tcase at 75°C

TOTALHARMONIC DISTORTION (THD)

48V Model, Tcase at75°C

EFFICIENCY vs LOAD

PWIM-40 series possess superior working efficiency that up to 90% can be reached in field applications. 48V Model, Tease at 75C

LOAD

LIFE TIME

Tease (c)

Block Diagram

Mechanical Specification

Recommend Mounting Direction

Installation Manual

Connection for Blank-type

Cautions

• Before commencing any installation or maintenance work, please disconnect the power supply from the utility. Ensure that it cannot be re-connected inadvertently!
• Keep proper ventilation around the unit and do not stack any objecton it. Also a 10-15 cm clearance must be keptwhen the adjacentdevice is a heat source
• Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de-rating in output current.
• Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit. Please refer to its specification
• For LED drivers with waterproof connectors, verify thatthe linkage between the unit and the lighting fixture is tight so that water cannotintrude into the system
• Fordimmable LED drivers, make sure that your dimming controlleris capable of driving these units.PWM series require 0.15mA each unit.
• Tc max. is identified on the product label. Please make sure thattemperature of Tc point will not exceed limit.
• DO NOT connect “DIM- to Vo-“
• Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes.
• The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re qualify EMC Directive on the complete installation again

User’s Manual

Symbols

Documents / Resources

| Mean Well PWM-40 Series Constant Voltage LED Driver [pdf] Owner's Manual
PWM-40 Series Constant Voltage LED Driver, PWM-40 Series, Constant Voltage LED Driver, Voltage LED Driver, LED Driver, Driver
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>