tp-link Tri-Band Wi-Fi 6E Router User Guide
- June 4, 2024
- tp-link
Table of Contents
Tri-Band Wi-Fi 6E Router
User Guide
Tri-Band Wi-Fi 6E Router
Set up with videos:
Scan QR code or visit https://www.tp-link.com/support/setup-video/#wi-
fi-routers
https://www.tp-link.com/support/setup-video/#wi-fi-routers
Connect the Hardware
- Unplug the power to turn off your modem, if any, and remove the backup battery if it has one.
- Refer to Q6 of Need Help? to place the router for optimal Wi-Fi performance. Modem
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the router’s 2.5 Gbps WAN/LAN port to it, then follow step 3 and 4 to complete the hardware connection.
Set Up the Network
Method 1: Via TP-Link Tether App
Download the Tether app
https://www.tp-link.com/app/qrcode/?app=tether
Open the Tether app and log in with your TP-Link ID. Note: If you don’t have
an account, create one first.
Tap the button in the Tether app and select Router > Wireless Router. Follow
the steps to complete the setup and connect to the internet.
Enjoy the internet
To enjoy a more complete service from TP-Link, bind your TP-Link ID to the
router
Method 2: Via a Web Browser
-
Connect your device to the router wirelessly or with an Ethernet cable. The default wireless network names (SSIDs) and passwords are printed on the label at the bottom of the router.
-
Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in.
Note: If the login window does not appear, refer to Q2 of Need Help? in this guide.
-
Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.
LED & Button Explanation
| LED Status | Description |
|---|---|
| Pulsing Orange | The router is starting up. |
| Solid Blue | The router is working properly. |
| Solid Red | No internet connection. |
| Solid Orange | The Wi-Fi is off. |
| Pulsing Red | The Wi-Fi is off and there is no |
| Pulsing Blue | The router is upgrading firmware, establishing a WPS connection, |
or resetting to factory settings.
Button| Description
---|---
| Press and hold for about 2 seconds to
| Press for 1 second to turn on or off the
| Press for 1 second, and immediately
Reset| Press and hold for about 6 seconds until the LED blinks to
factory reset the router.
TP-Link HomeShield
TP-Link HomeShield premium security services keep your home network safe with cutting-edge features for the network. Download the Tether app to enjoy HomeShield features. For more details, visit https://www.tp- link.com/homeshield.
To communicate with TP-Link users or engineers, visit https://community.tp-
link.com to join TP-Link Community.
**** For technical support, replacement services, user guides, and other
information, please visit https://www.tp-link.com/support.
If you have any suggestions or needs for our product guides, you are welcome
to email techwriter@tp-link.com.cn.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use any other chargers than those recommended.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use devices where wireless devices are not allowed.
- The adapter shall be installed near the equipment and shall be easily accessible.
This device is restricted to indoor use only. The operation of this device is prohibited on oil platforms, cars, trans, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.
Need Help?
Q1. What should I do if I want to use 1 Gbps WAN/LAN port for internet service?****
– • Connect to the 1 Gbps WAN/LAN port with an Ethernet cable. During the Quick Setup, select the 1 Gbps WAN/LAN port as the internet port. Alternatively, go to Internet > Internet Port (web management page) or Tools > Internet Connection > Internet Port (Tether app) to change the internet port.
Q2. What should I do if I can’t access the web management page?****
– • Reboot your router and try again.
• If the computer is set to a static IP, change its settings to obtain an IP
address automatically.
• Verify that http://tplinkwifi.net is correctly entered in the web browser.
Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web
browser.
• Use another web browser and try again.
• Disable and enable the network adapter in use.
Q3. What should I do if I can’t access the internet?****
– • Log in to the web management page of the router, go to Internet > Internet
Port, and check if you selected the port that you’ve already plugged your
Ethernet cable into.
• Power off your modem for about 5 minutes, then power it on and check the
internet. If your modem has more than one Ethernet port, keep other ports
unconnected.
• Check if the internet is working normally by connecting a computer directly
to the modem via an Ethernet cable. If it is not, contact your internet
service provider.
• Log in to the web management page, and go to the Network Map page to check
whether the internet IP address is valid or not. If it’s valid, go to Advanced
Network > Internet, click Advanced Settings, select Use the Following DNS Addresses, set the primary DNS to 8.8.8.8, and set the secondary DNS to 8.8.4.4. If it is not, check the hardware connection or contact your internet service provider.
• For cable modem users, log in to the web management page of the router and go to Advanced > Network > Internet > MAC Clone. Select Clone Current Device MAC and click SAVE. Then reboot both the modem and the router.
Q4. What should I do if I forget my wireless password?****
– • If you have not changed the default wireless password, it can be found on
the label at the bottom of the router.
• Connect a computer directly to the router using an Ethernet cable. Log in to
the router’s web management page at http://tplinkwifi.net, and go to the
Wireless page to retrieve or reset your wireless password.
Q5. What should I do if I forget my web management page password?****
– • If you are using a TP-Link ID to log in, click Forgot Password? on the
login page and then follow the instructions to reset it.
• Alternatively, press and hold the Reset button for about 6 seconds until the
LED blinks. Then visit http://tplinkwifi.net to create a new login password.
Q6. How should I position my router for optimal Wi-Fi performance?****
– • Don’t place your router in a corner or in a closet.
• Avoid obstacles and high-powered appliances.
• Keep your router in a central location at a certain height.
• Keep the antennas vertical when the router is placed on a desktop. Keep the
antennas upright when the router is hanging on a wall.
Images may differ from your actual product
©2021 TP-Link 7106509285 REV1.0.0
References
- 域名售卖
- Trying to configure the Router? | TP-Link
- TP-Link Community
- HomeShield | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>