Varta 57913 Wireless Power Bank User Guide
- June 13, 2024
- VARTA
Table of Contents
Varta 57913 Wireless Power Bank User Guide
WHAT IS IN THE BOX
Safety Instructions
- Do not use or store power bank near heat sources such as re or heaters and do not leave the product in an enclosed vehicle.
- Keep the product away from water or humid environments.
- Do not disassemble, damage, jolt, or pierce the product.
- Do not use the power bank below 0°C or above 50°C, otherwise, the charge and discharge function of the power bank will be disabled due to an internal safety mechanism.
- Keep the product away from children.
Instructions for the best treatment
- Recommended operating and storage temperature: 10°C- 30°C
- The power bank’s optimal state of charge is between 30% and 70%.
- If the device is not used for a long period of time, store it with a state of charge of approx. 70% and charge it every 3-6 months and place it in a cool, dry place. Otherwise, it will reduce the performance of the power bank or shorten the power bank’s life. In case of damages/failure contact a VARTA dealer.
Hereby, VARTA Consumer Batteries GmbH & Co. KGaA declares that the radio equipment type VARTA Wireless Power Bank 10000 57913 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.varta- consumer.com/en
Charging the Powerbank
Fig. 1: Push the button to check the charging status. Charging status display of 100% (four white LEDs glowing) down to 25% (only one white LED on – charging is recommended!)
Fig. 2: Connect Powerpack to a standard USB port, e.g. Laptop, USB Power
Supply. Charging times depend on charging the current
Fig. 3: White LED ashes: Power bank is charging. White LEDs glow:
charging finished. Quick Charge Indicator: The left LED (LED4) glows blue. For
a quick charge, it is necessary to use a Quick Charge 2.0 (or higher)/ USB
Type C PD adapter and a speed charge cable.
How to use the Powerbank
Fig. 4: Plug mobile devices into power. Depending on the device type it
is an on / o necessary.
How to use the Wireless Charger
Make sure that your device is compatible with wireless charging.
Fig. 1: Place your device on the backside of the charging pad.
- push on/ o button to activate the Wireless Charger b) Blue right LED (LED2) on the Wireless Charger on c) Blue right LED (LED2) slowly ashing:
- Wireless Charger charges
- Blue right LED (LED2): Wireless Charger charging finished (please check smartphone charging status directly) e) Blue right LED (LED2) fast ashing: error/ foreign object detected
- Fig. 2: Make sure to have a centered charging position as shown in the picture.
Environmental Protection
To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted municipal waste, but recovered, reused, or recycled. For further information on recycling please contact your local city council.
Download
PDF:Varta 57913 Wireless Power Bank User Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>