hama 00205322 Bluetooth Audio Transmitter and Receiver Instruction Manual

June 13, 2024
Hama

00    205322
Bluetooth® audio transmitter /receiver
Bluetooth® -Audio-Sender /Empfänger

 00205322 Bluetooth Audio Transmitter and Receiver

hama 00205322 Bluetooth Audio Transmitter and ReceiverOperating Instructionshama 00205322 Bluetooth Audio Transmitter
and Receiver - overview

Thank you for choosing this Hama product!
Take your time and read the following instructions and information completely.
Please keep these instructions in asafe place for futurereference.

Controls and displays

  1. LC display

  2. On/Off button

  3. Bluetooth®button

  4. Mode button (TX|RX|BYPASS)

  5. Button for new Bluetooth® connection

  6. Multi-function button
    (Pause /Play /Volume /Navigation)

  7. Power supply (USB-C)

  8. 3.5mm jack Audio OUT

  9. Toslink (optical) Audio OUT

  10. Toslink (optical) Audio IN

  11. 3.5mm jack Audio IN

  12. Antenna

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates arisk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

  • 1x”Link.it duo” Bluetooth® audio transmitter /receiver
  • 1xUSB-C power cable
  • 1×3.5mm to RCAaudio cable
  • 1×3.5mm audio cable
  • 1xoptical audio cable (Toslink)
  • 1xoperating instructions
  • 2xdisposal slip (Triman/WEEE)

 Safety instructions

  • The product is intended for private, noncommercial use only.
  • The product is intended only for use inside buildings.
  • Use the product only for the intended purpose.
  • Protect the product from dirt, moistureand overheating and use it in dry rooms only.
  • Children should be supervised to ensurethat they do not play with theproduct.
  • Donot use the product in areas in which electronic products arenot permitted.
  • Route allcables so thereisnorisk of tripping.
  • Donot bend or crush thecable.
  • Donot drop the product and do not expose it to any major shocks.
  • Dispose of packagingmaterial immediatelyin accordance with the locally applicable regulations.
  • Donot modify the product in any way.Doing so voids the warranty.

Warning

  • Donot attempt to service or repair the device yourself.Leave any and allservice work to qualified experts
  • Donot open the product or continue to operate it if it becomes damaged

Switching on/off

  • Connect the power supply (7) to asuitableUSB-A socket (e.g. TV/USBpower supply unit etc.) using the USB-Cpower cable. When thepower supplyis established, the device starts automatically.
  • Press the On/Off button (2) for approx. 3seconds until the display comes on.
  • Toswitch off,press the On/Off button (2) for approx. 3seconds until thedisplay goes off.

Receiver mode (RX)

Receiver mode lets you wirelessly stream music from your smartphone or other Bluetooth®audiosource to your wired speakers or home cinema system.hama
00205322 Bluetooth Audio Transmitter and Receiver - Receiver
mode 6.1 Connection
Connect your speakers or home cinema system to one of the two audio OUT connectors using an appropriate cable.
6.2 Pairing
The device can be connected to up to 2audio sources simultaneously.Once paired, these 2 connections arere-established as soon as Bluetooth® is activated.

  • Press the mode button (4) until RX appears in the display to switch to reception mode.
  • Search using your device for the product (only required on the first connection).
  • Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows “Hama Link.it duo devices”.
  • Select “HAMA Link.it duo devices” and follow the instructions of your device and complete the pairing process.

Note -Bluetooth® password

  • Some devices require a passwor dinorder to connect to another Bluetooth® device.
  • Ifyour device requests a password to connect, enter 0000.

6.3 Multi-point technology
This product can connect to two Bluetooth® -enabled audio signal sources simultaneously (multi-point).
These areshown accordingly in the display.

  • First connect the first device to your product.
  • Then connect the second device to your product (see 6.2).

6.4 Playback

  • Start playback on your audio signal source.
  • You can select the volume and tracksusing the multi-function knob.

Transmitter mode (TX)

Transmitter mode allows you to wirelessly transmit music from an audio source (e.g. TV or home cinema system) to up to 2Bluetooth® receivers (e.g. speakers or headphones).hama 00205322 Bluetooth Audio Transmitter and Receiver -
Transmitter mode 7.1 Connection
Connect your audio source to one of the twoaudio IN connectors using an appropriate cable.
7.2 Pairing
The device can be connected to up to 2Bluetooth® receivers simultaneously.Once paired, these 2 connections arere-established as soon as Bluetooth® is activated.

  • Press the mode button (4) until TX is showninthe displaytoswitch to transmitter mode.
  • Activate pairing mode on your Bluetooth® receiver.
  • Press the Bluetooth® button (3)
  • After afew seconds, thename of your Bluetooth® receiver is shown on thedevice’s display.
  • Use the multi-function knob (6) to select your Bluetooth® receiver.
  • Avoice confirms the successful pairing.

7.3 Multi-point technology This product can connect to two Bluetooth® receivers simultaneously.(Multi-point). These areshown accordingly in the display.

  • First connect the first device to your product.
  • Then connect the seconddevice to your product.

7.4 Playback

  • Start playback on your audio signal source.
  • You can select the volume and tracks using the multi-function knob.

Bypass mode (BYPASS)

Bypass mode allows youtotransmit music from an audio source (e.g. TV,home cinema system or smartphone) to audio devices (e.g. speakers or headphones) with cable and/or fibre.hama 00205322 Bluetooth Audio Transmitter and
Receiver - Multi-point technology 2 8.1 Connection

  • Connect your audio source to one of the two audio IN connectors using an appropriate cable.
  • Connect your audio devices to one of the two audio OUT connectors using an appropriate cable.
  • Press the mode button (4) until BYPASS appears in the display to switch to bypass mode.

8.2 Playback

  • Start playback on your audio signal source.
  • You can select the volume and tracksusing the multi-function knob.

Warranty disclaimer

Hama GmbH & Co KGassumes no liability and provides no warranty for damage resulting from improper installation, mountingand improper useof the product or from failure to observe the operating instructions and/or the safety instructions.

Technical data

Nominal voltage 5V USB-C
Rated current consumption 180mA
Ambient temperature 0to 55°C
Bluetooth version CSR V5.2
Profiles A2DP
Codec SBC/AAC/aptX LL
Bluetooth power class Class 2
Bluetooth frequency 2402-2480 MHz
Maximum radio-frequency power transmitted 25mW

Declaration of conformity

**** Hama GmbH &CoKGhereby declares that the radio equipment type [00205322] is in compliance with Directive 2014/53/EU.The fulltext of the EU declaration of conformity is available at the following
Internet address: https://uk.hama.com Downloads
The Bluetooth® word mark andlogos are registered trade marks owned byBluetooth SIG, Inc. andany use of such marks by Hama GmbH & Co KG is underlicense.
Other trademarks andtrade namesare those of their respective owners.
All listed brands are trademarks of the corresponding companies.
Errors andomissions excepted,and subject to technical changes.
Ourgeneral terms of delivery and payment are applied.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0     hama 00205322 Bluetooth Audio Transmitter and
Receiver - icon 200205322/08.23

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals