Skullcandy Rail ANC True Wireless Earbuds User Guide

Skullcandy Rail ANC True Wireless Earbuds

Download the Skull-iQ® App

Scan to get started.
Warranty information at: skulcandy.com/warranty

Auto Power – On/Off

• Auto On – Remove buds from Case
• Auto Off – Place buds into Case

Power – On/Off

Power – On

Off Mode

Power- On
On/off

Power – Off

On Mode

Power- Off
Off

Pairing Mode

On Mode

Pair New Device

Voice Prompt – “Ready to Pair”
Available Device – “Rail ANC”

Play/Pause Answer Call

While On

Track Forward

ANC / Stay-Aware

Mode On/Off

Stay-aware mode on/off

Either bud

• While On
• Spotify App Required

One Touch to Spotify

Find With Tile™

Both Earbuds

• Tile App Required

Pair Tile™M

Re-Sync Earbuds

Both Earbuds

• While On
• Bluetooth Disconnected

Re-sync earbuds

Charge Earbuds

Earbud LED’s turn RED to indicate charging.

Charge the Case

Reset Paired
Device List
Both earbuds

• While ON
• Bluetooth Disconnected

Reset Device

Voice Control

Skull-iQ™ App Required

Questions Visit: www.skullcandy.com

Maximum operating temperature 45°C.

Speaker Driver: 12mm, Impedance: 32 Ohms, THD <3%@50Hz-10KHz, Voltage Regulation; 3.7v, Bluetooth® 5.2, Frequency Band: 2.402GHz – 2.480GHz, Maximum Power: 10.67dBm, Weight: 49.8a.

Skullcandy, Sand other marks are registered trademarks of Skullcandy, Inc. Al rights reserved,”Android” is a trademark of Google inc. “Apple” is a trademark of Apple inc. «Android» est une marque de commerce de Google inc. «Apple» est une marque commerciale d’Apple inc. “Android” es una marca comercial de Google inc. ‘Apple’ es una marca comercial de Apple inc.
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple products) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory slandards, Please nole that the use of this accessory with an Apple product may affect wireless performance. iPhone, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Statement
This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1 )This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

FCC SAR statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves establshed by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

EN Contains Li-ion battery. Battery must be recycled or disposed of properly.

Made in Vietnam.

Skullcandy products are backed by a 1-year warranty. If it doesn’t work the way we promised, we’l make it right. For claims, questions, or Terms & Conditions:
U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL
All other countries: visit Skulcandy.com/support/international- support Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfill where hazardous substances will leak out and cause sol and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed out wheeled bin symbol. Please do not throw any electrical equipment (including those marked . with the crossed out wheeled bin symbol) in your bin.

Many Local Authorities will have containers that collect batteries for recycling.
Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health.
Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shal be dispose of separately from household waste, When this product reaches its end of life, take it to a collection point designated by local authorities or return to purchase location for recycing or disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Skullcandy Internation GmbH declares that the radio equipment type [Model: S2IPW] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: skullcandy.eu/product-documents

R-41191086
www.bis.gov.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>