YADEA ELITS YDX1 Electric Scooter Instructions

: June 13, 2024
: YADEA

Table of Contents

PART1 Safety Precautions
PART2 Routine Maintenance
PART3 Parameter List
PART4 Troubleshooting
PART5 After-sales Service
PART6 Warranty Scope
PART7 Trademarks And Legal Statements
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Important Information

PART1 Safety Precautions

Safety Instructions

Before using the electric scooter (hereinafter referred to as “scooter”), please read through the “Warning”, “Caution” and “Fire Risk” instruction contained in this manual, which shall be strictly followed.This will help to ensure safety while you are riding the scooter.
Scooter is a recreational product, and riding skills need to be mastered through practice.Yadea Technology Group shall not be liable for any property damage, accident, personal injury or legal dispute arising from or in connection with lack of riding experience or failure to comply with the safety requirements in the instructions.
Following the safety instructions helps reduce risks, but shall not completely eliminate all risks.There is a risk of injury or death due to loss of control, collision or fall while using the scooter.
Like other vehicles, the faster the scooter goes, the longer the braking distance. Hence, emergency braking on slippery roads may cause the wheels to slip and lose balance.
While in a public area, the scooter will be regarded as a vehicle, which contains some safety risks.In order to protect yourself and others, please use the scooter strictly in accordance with the instructions in this manual and abide by the national and local trafﬁc laws and regulations.Do not ride the scooter in areas prohibited by law.
When riding the scooter on a public road, risks caused by illegal riding and improper operation of others and other vehicles may accur even if the safe riding instructions in this manual are fully followed.
ONLY use Yadea approved parts, and contact qualiﬁed service personnel for replacement.This product contains no user-serviceable parts, so do not attempt to disassemble or modify the performance and conﬁguration of the scooter by yourself.Improper installation may result in serious damage or injury, and void the warranty. The loss caused will be borne by you personally.
Do not lend the scooter to people who do not know how to operate it to avoid any injuries. When lend the scooter, please hand over this manual and ensure the riding safety of the new user.
All accessories, packages and detachable parts contained in this product shall be kept away from children or pets to avoid injury caused by improper play, suffocation and accidental eating.

Instructions For Riding

Respect the right of way of pedestrians to avoid scaring the pedestrians while riding the scooter. Ring the bell and slow down to pass when approaching pedestrians.
Pay attention to the terrain while riding the scooter, maintain an appropriate speed, and keep a reasonable and safe distance from others or other vehicles.In case of difﬁcult terrain, please get off and push.
Always hold the handlebars with both hands and put both feet on the pedals while riding the scooter.Pay attention and do not use your cell phone, headphone or do anything unnecessarily to riding.
Do not accelerate or decelerate suddenly while riding the scooter, and do not make a sharp brake when riding downhill or at high speed, to avoid risks of uncontrolled collision or fall due to forward shift of center of gravity.
Do not use the scooter to transport any goods.
Do not perform stunts while riding.
Do not press on the thumb shifter to accelerate while walking with the scooter.

Requirements For Riding Environment

Do not ride the scooter in dense fog, smoke and low visibility environment.Make sure you could see the road clearly and that others could see you clearly too.
Ride in the non-motorized vehicle lane only. On the road without non-motorized vehicle lane, ride on the right side of the road or follow the local trafﬁc regulations.
When riding at night, it is recommended to wear reﬂective clothing and travel at low speed.
Do not ride on potholes, mud, sand, grass, gravel roads and stairs.
Do not wade or go straight through puddles.Water ingress into the scooter may cause the battery to become wet, posing a risk of functional damage, ﬁre or even explosion.Damage and loss due to water ingress is not covered by the warranty.
Low temperatures may compromise the battery life. And an ambient temperature of 25℃ provides the best battery life and performance.
This product is not recommended for use in areas at an altitude over 2,000 meters.

Following Persons Are Not Allowed

Those who are physically fatigued or have insufﬁcient energy.
The pregnant, children, the elderly.Age requirement: 16 to 50 years old.
Those who are under the inﬂuence of alcohol or other drugs.
Those with reduced mobility due to illness.
Overweight personnel.Recommended maximum load: ≤120kg.
Those who are unable to maintain balance for other reasons.

Caution
Avoid wearing long skirts or loose clothes when riding the scooter in case of being caught by the scooter parts and causing injury.

PART2 Routine Maintenance

Cleaning

When the surface is stained, wipe the whole scooter body with a piece of soft cloth dipped in a small amount of clean water, and then wipe the body till it is dry.
Do not directly splash a large amount of water on the brake components, motor and battery box, as the internal water will reduce the service life of the components.

Caution

Do not use alcohol, gasoline, acetone or other corrosive and volatile solvents to clean the scooter. These substances may seriously damage the appearance and internal structure of the scooter.
It is strictly prohibited to use pressure water and water gun to spray and wash, or use forced methods to clean the scooter.

Warning

Disconnect the power supply of the whole scooter and keep it in shutdown state before cleaning. Fasten the plastic cover of the charging port, otherwise there may be a risk of electric shock or serious damage to electronic components due to internal water ingress.
Never touch live parts with wet hands or metal conductors.

Storage

When using in summer, please pay attention to the ambient temperature of the scooter should not be higher than 40°C, and the scooter should not be exposed to outdoor sunlight for a long time.
When using in winter, please pay attention to the ambient temperature of the scooter should not be lower than -10 °C, if the use environment is lower than 0 °C, the scooter needs to be placed at normal room temperature for half an hour before charging.
For prolonged storage, keep the scooter in a ﬂat, stable, dry and cool room to avoid prolonged exposure to the outdoor environment. Sunshine and rain may cause corrosion or aging of scooter components and reduce the service life of battery pack.

Tire Maintenance

This scooter adopts inﬂated tires. To ensure riding safety, it is recommended to check the tire pressure once a month and inﬂate in time. Recommended inﬂation pressure range: 40-50psi.
As the wheel disassembly is a complex process, in case you need to replace the tire, please contact the professional maintenance personnel. Self-assembly may lead to component failure or instability of the scooter.

Battery Maintenance

Do not disassemble the battery by yourself. For any help, please contact Yadea customer service department or professional maintenance personnel.
Charge the battery between 0℃ – 45℃. When the battery power is lower than 20%, charge it in time to avoid battery power loss.
Battery performance and service life may be compromised when used at temperatures below 0 ℃.
Do not discard the battery pack at will. Please refer to the relevant local laws and regulations for the recycling and treatment methods of waste and damaged batteries to avoid environmental pollution.

Caution

When the scooter is turned off, the battery will continue to drain power. Under normal conditions, a battery with 60% power will drain its stored power after about 180 days of standby.
For prolonged storage, the battery shall be kept at 60% electric capacity or more. It is recommended to charge the battery once every 30-60 days to avoid damage to the function of the battery due to too low discharge.
The intelligent device inside the battery could monitor the charging/discharging status of the battery, and the damage caused by overcharging or overdischarging is not covered by the warranty.

Warning

Do not use other models or brands of battery packs, as this may involve safety risks.
Do not disassemble, squeeze or puncture the product. Do not open or puncture the enclosure; avoid short circuit caused by metal objects touching battery contacts, which may cause battery damage or personal injury.
Do not throw this product into water, ﬁre (including near heat sources such as stove and heater) or directly expose it to the environment over 50℃. Water ingress into the battery may cause damage to the internal circuitry and risk of ﬁre or even explosion.
If water is suspected to enter the battery, stop using the battery immediately and contact the local service station for testing.
Do not attempt to take out the battery pack by yourself. It is very complicated to disassemble the battery, and mishandling will affect the use of the scooter.
Do not disassemble and repair the battery by yourself, which may cause battery failure, overheating and even ﬁre risk.
Do not use the scooter at ambient temperatures that exceed the operating temperature range of the product, as high/low temperatures will limit the maximum power.

PART3 Parameter List

Parts	Item	Parameters
Basic information	Product model

Unfolding size
Folding size
Net weight| YDX1
12455851340mm
1245585555mm
28kg
Scooter| Axial distance
Maximum load
Maximum speed
*General range
Maximum slope
Driving mode
Braking mode
Waterproof grade
Service temperature
Storage temperature| 945mm
120kg
25km/h(16mph)
60km(37mile)
30%
Rear wheel drive
Drum brake + double-acting disc brake
+ Electronic Brake
IPX5
-10℃~40℃
-20℃~60℃
Battery| Battery capacity
Rated voltage
Charging ambient temperature
Intelligent BMS| 48V14Ah
48V
0-45℃ (0 – 113°F)
Over-voltage / under-voltage / short-circuit
/ over-current / over-heating protection
Charger| Lnput voltage
Rated output voltage
Charging time| AC100~240V
54.6V
7-8h
Motor| Type
Rated power
Maximum output power| Hall BLDC
800W
1500W
Tire| Type
Size| self-healing tubeless tires
10 inches
Damping| Damping mode| Front & Rear Polymer Shock Absorber

*General range: measured when the scooter is fully charged, with a load of 75kg, ambient temperature of 25℃, no wind, ﬂat asphalt road surface, and at a constant speed of 15km/h.

PART4 Troubleshooting

Fault code	Fault indication	Solution
E0	Communication failure	Check the connection between the controller,

PART5 After-sales Service

Warranty Policy

If the product shows any fault as shown in the “Scooter Faults” hereinunder within 7 days after the user’s receipt of the product, after testing and veriﬁcation by Yadea after-sales service center, a refund or replacement will be provided.
If the product shows any fault as shown in the “Scooter Faults” hereinunder within the 8th to 15th day after the user’s receipt of the product, after testing and veriﬁcation by Yadea after-sales service center, a replacement or repair will be provided.

Attention

It is advised to keep the packaging for a minimum period of 15 days after receipt of the product, as the packaging is essential in keeping the product from damage during transport.
Yadea is not liable for any secondary damage of the product returned for refund/replacement/repair caused by packaging issues during such return, and may reject such refund/replacement/repair.

Scooter Faults

Product	Faults
Scooter	1. Motor failure under normal circumstances

2. Controller fault under normal circumstances
3. Charger fault under normal circumstances
4. Charger fault under normal circumstances
5. Scooter deformation or breaking which renders it unusable under normal circumstances

PART6 Warranty Scope

The warranty period of the scooter is 1 year. Warranty periods for parts and component are shown in the table below:

No.| Description| Parts and Components| Warranty Period| Remark
---|---|---|---|---
1| Main body| Frame assembly, hub motor, handlebar, front body, front fork & cantilever, front hub| 18M|
2| Main parts| Battery, dashboard, dontroller, disc brake, disc drake mount, drum brake, folder, bearing set, main cable bundle, brake cable, rubber shock absorber| 12M|
3| General components| Charger, brakebar & bell, thumb shifter, tire| 6M|
4| Wear parts| Headlight, taillight, instrument cover, handle cover, front/rear fender, decorative cover, parking bracket assembly, pedal bottom plate, foot pad, charging port seat, rubber plug, etc.| 3M|

This Warranty Does Not Apply To:

Any failure to use the product according to the user instructions, including but not limited to, unauthorized repair, misuse, collision, negligence, abuse, liquid ingress, accident, tampering, use of non-authorized parts, destroying or tampering with the sticker, anti-counterfeit label;
Beyond warranty period;
Damage due to force majeure events;
Beyond faults listed in the “Scooter Faults” above;
Any damage caused by human error, including but not limited to, scooter liquid ingress, tire piercing,collision, surface scratch due to normal use;
Use of the product for commercial purposes.

PART7 Trademarks And Legal Statements

At the time of printing, we have tried to include descriptions and instructions for all the functions of the scooter. However, due to continuous product improvement and design changes, your scooter may deviate from the products mentioned in this document in terms of color, appearance, etc. Please refer to the actual products.
Please go to the Apple App Store (iOS) or Google App Store (Android) to download and install apps.
Please note that some of the features mentioned here may not apply to your organization. Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
All rights reserved by Yadea Technology Group Limited.
The copyright of this manual belongs to Yadea Technology Group Co., Ltd., and shall not be reproduced without the written consent of the Company. Violators will be prosecuted.
Yadea Technology Group Co., Ltd. reserves the right to interpret this manual.

FCC Compliance Statement
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

www.yadea.com