NIGHTOWL FWIP2-I Indoor Wi-Fi IP Plug In 1080p Deterrence Camera with 2 Way Audio White User Manual

NIGHTOWL FWIP2-I Indoor Wi-Fi IP Plug In 1080p Deterrence Camera with 2

Way Audio White

Product Information

The product is an indoor camera designed for surveillance purposes. It comes with a mounting stand, USB cable, power adapter, and mounting hardware. The camera features a microphone, speaker, lens, and a reset button. It also has a status LED that indicates different camera statuses.

Product Usage Instructions

1. Add your Camera: To start using the camera, add it to the Night Owl app or a compatible recorder. For detailed setup steps, scan the QR codes provided in the manual.
2. Remove Protective Film: Quickly remove the clear protective film from the camera lens.
3. Install the Camera: There are three ways to set up the camera:
   • Use the stand and place the camera on a flat surface.
   • Remove the stand and place the camera cube on a flat surface.
   • Mount the camera using the camera stand and mounting hardware.
   • Note: If mounting the camera, you will need a screwdriver or drill (not included).
4. Download the Night Owl App: If you are a first-time user, download the Night Owl app, create an account, and log in. If you already have an account, simply log in.
5. Plug It In: Use the provided USB cable and power adapter to plug your camera into an outlet. For initial setup/pairing, keep the camera within 1 to 3 feet of your router or recorder.

If you need further assistance or have any questions, you can visit Support.NightOwlSP.com. On the support page, you can use the Live Chat feature or contact Live Phone support.

What’s Included

NOTE: If mounting the camera, you will need a screwdriver or drill (not included).

Camera Details

Download the Night Owl App

• If you are a first-time user, go ahead and download the Night Owl app. Quickly create an account and log in.

Already have an account? Simply log in

Plug It In

• Use the provided USB cable and power adapter to plug your camera into an outlet.

NOTE: For initial setup/pairing, have your camera within 1 to 3 feet of your router or recorder.

Add your Camera

• To begin viewing your camera, add it to the Night Owl app or to a compatible recorder.
• For more detailed setup steps, scan the QR codes below.

Status LED Guide

LED Status/ Camera Status

Remove Protective Film

• Quickly remove the clear protective film from the camera lens.

Install the Camera

Your camera can be set up 3 different ways:

• Use the stand and place the camera on a flat surface.
• Remove the stand and place the camera cube on a flat surface.
• Mount the camera using the camera stand and mounting hardware.

Need Help

We are here for you

Our support site is filled with self-help material. From your support page you can use the Live Chat feature or contact our Live Phone support.

1. Please visit Support.NightOwlSP.com
2. Enter FWIP2 into the Search bar

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Compliance Statement: These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>