Eureka SQ Vestibule Accessory Instructions
- June 13, 2024
- Eureka
Table of Contents
Eureka SQ Vestibule Accessory
Product Information: Timberline SQ Vestibule Accessory
The Timberline SQ Vestibule Accessory is designed to enhance your camping
experience by providing additional storage space and protection from the
elements. This accessory is compatible with the Timberline SQ tent series and
is easy to install and use.
Key Features
- Durable construction: The vestibule is made from high-quality materials to withstand various weather conditions.
- Easy installation: The accessory can be quickly attached to your tent without any hassle.
- Ample space: The vestibule offers extra storage space for your camping gear, backpacks, or shoes.
- Protection: It provides an additional barrier against rain, wind, and sun, keeping your belongings and tent interior dry and protected.
Product Usage Instructions
-
1. Ensure that your tent is already set up and staked securely. - Locate the top web of the vestibule accessory and push it through the center of the shock cord.
- Wrap the top web up and over the black hub and secure it with the toggle.
Note : To make installation easier, release the wings from their stakes and fold them back over the poles.
- Hang the J-Hook onto the web loop near the end of the ridge pole extension.
- The vestibule and tent webs share the same pole. Lift the pole and fit the vestibule grommet underneath the tent grommet.
- Pull out and stake down the two front web loops to secure the vestibule in place.
- Restake the wings of your tent to ensure stability and proper functioning of the vestibule.
Your Timberline SQ Vestibule Accessory is now installed and ready to provide you with additional storage space and protection during your camping adventures.
Timberline SQ Vestibule Accessory
-
Begin with your tent already set up and staked.
-
Push the top web through the center of the shock cord. Wrap it up and over the black hub. Secure with the toggle.
Note : it’s easier to install the vestibule if you release the “wings” from their stakes and fold them back over the poles. -
Hang the J-Hook onto the web loop near the end of the ridge pole extension.
-
There are a pair of Velcro® tabs on each side of the vestibule. Wrap them around the tent pole.
-
The vestibule and tent webs share the same pole. Lift the pole and fit the vestibule grommet underneath the tent grommet.
-
Pull out and stake down the two front web loops. Restake the “Wings” and Your Vestibule is Ready.
Johnson Outdoors Gear LLC © 2010 rev. A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>