TEFITI EX102 Heart Rate SmartWatch User Manual
- June 13, 2024
- TEFITI
Table of Contents
EX102 Heart Rate SmartWatch
Product Information
This product is designed to provide wireless connectivity and operates within the guidelines set by Part 15 of the FCC Rules. It is intended to be used for various purposes, including but not limited to, transmitting and receiving data wirelessly.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without any restrictions. It is important to note that while the device complies with FCC regulations, there is no guarantee that it will not cause interference in a particular installation.
Product Usage Instructions
If this equipment causes harmful interference to radio or television reception, you can try the following measures to correct the interference:
- Reorient or relocate the receiving antenna to improve signal reception.
- Increase the separation between the equipment and the receiver to minimize interference.
- Connect the equipment to a power outlet on a different circuit than the one connected to the receiver.
- If you are unable to resolve the interference, consult the dealer or an experienced radio/TV technician for assistance.
It is important to ensure that the device is operated in accordance with these instructions to minimize any potential interference. Please refer to the user manual for additional information on proper usage and troubleshooting.
Warning
Please consult your doctor before starting a new exercise program. Although the smart watch can monitor your heart rate, it can’t be used for any medical purpose. It is designed to help people live healthier lives. Please remember to consult your doctor before starting any exercise and diet plan.
Device requirements
This product supports devices with iOS 8.0, Android 4.3 and above, and Bluetooth 4.0. Android 6.0 and above devices need to open the GPS permission to use.
Charging
-
In order to ensure good charging contact, please keep the metal contact free of dirt, oxidation and impurities. if the device is idle for a long time, please remember to recharge at least once a month.
-
When charging the wireless charger, just place the watch on the concave side of the wireless charging head and adsorb it for charging.
-
a. Please align the magnetic absorption line with the metal sheet of the bottom shell. and the magnet will automatically charge the positive and negative electrodes.
-
b. Please ensure that the charging contact is free of dirt and impurities. If there is, please wipe it clean to avoid afecting the charging.
-
c. Plug the USB into the 5V500MA charging stand, and it can be fully charged in 2-3 hours.
How to connect smart watch with mobile phone
- Power on: charge or press the smart watch side button for 3 seconds.
- Install APP: Scan QR code through mobile phone, or search “TEFITI APP in Apple APP store, Google Play Store to download and install.
How to connect smart watch through mobile APP:
First, put the smart watch close to the mobile phone, and then turn on the
Bluetooth and GPS of the mobile phone according to the APP connection guide.
Then search the APP for the Bluetooth name is “Smart Watch”. Click the smart
watch to connect. Set personal information according to APP prompts, and allow
APP to obtain mobile authority to complete the connection.
Apple device connection
After the smart watch and Apple App are connected for the frst time, the
“Bluetooth pairing request” will be prompted. Please click “Pair” to complete
the connection. After pairing, it is allowed to display a notice to check
whether the Bluetooth settings are connected. Then enter the system to check
whether the sharing notice is turned on, and then the smart watch can receive
from iOS system push Calls, SMS, QQ, WeChat and other notifcation reminders,
otherwise can not receive the reminders.
Android device connection
When connecting with Android system, you need to open the APP background
operation permission in the mobile phone manager or system settings (please
open the options such as self-start, high power consumption, white list, etc.,
otherwise the APP will be cleared by the system, and the connection with the
smart watch will be disconnected.)
Connection call Bluetooth
- After the APP is connected, the watch turns on the
- Bluetooth call, and the phone will pop up the call pairing prompt. Click on the pairing to complete the
- Bluolooth call connoction with “Smod Watch”
- Some phones require manual access to settings,
- Bluetooth, search for “Smart Watch (xXXx)* and dick connect.
Apple devices connect to Bluetooth for calling: (iOS 13 and above systems will automatically connect to Bluetooth for calling after connecting to the APP, and iOS13 and below systems need to manually connect to Bluetooth for calling. )
After connecting the APP watch, turn on the call Bluetooth switch of the watch, then turn on the phone settings, Bluetooth, search for Smart Watch (xxxx), and click Connect.
Unbind
- Unbind Android device: Click unbind on the app device to unbind the smart watch and the APP.
- Unbind Apple device: Click on the device in the app to unbind the smart watch and the app; Enter the phone settings-Bluetooth, click the exclamation mark behind the name Smart Watch, and click Ignore this device in the pop-up dialog box.The phone will be completely disconnected from the watch.
Note: After unbinding the watch from the Apple APP, you will also need to unbind and unpair of phone’s Bluetooth.
Precautions
- In theory, the smart watch supports operating system iOS8.0, Android4.30r above and Bluetooth 4.0 devices, but not all mobile device models. Please refer to the actual conditions for details.
- The product is charged with 5500MA. It is strictly forbidden to use the over- voltage load power supply to avoid hardware damage.
- The smart watch battery is built-in and cannot be removed. Please do not try to replace the battery.
- The operating environment of the wristband is 0°C to 45°C;Charging temperature: 0°C to 45°C.
- Please note when wearing: if you are sensitive skin or wearing the wristband too tightly, you may feel uncomfortable.
- Please wipe the smart watch dry before charging. Otherwise, it will lead to failure or corrosion of charging contact point.
FCC STATEMENTS
FCC Warning Statement: Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radiocommunications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
Thedevice can be used in portable exposure condition without restriction.