ESCHENBACH 162451 MaxDETAIL Max Detail Magnifier User Manual

: June 13, 2024
: ESCHENBACH

Table of Contents

ESCHENBACH 162451 MaxDETAIL Max Detail Magnifier
Product Usage Instructions
Overview
Safety instructions
Adjustment
Care instructions
Technical data
Guarantee
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ESCHENBACH 162451 MaxDETAIL Max Detail Magnifier

Product Usage Instructions

Start by holding the glasses with the front facing away from you.
Gently bend the plastic earpieces to adjust them to your desired position.
The earpieces can be bent without heating them.
An internal metal wire will keep the earpieces in the adjusted position.
Ensure that the glasses fit comfortably on your ears.
Make any necessary additional adjustments to the frames for a proper fit.

Your new acquisition is a quality product from the house of Eschenbach. This topclass “Made in Germany” product was manufactured using the most up-to-date production methods available. Congratulations on your choice. The MaxDetail allows you to read texts twice as large without straining your eyes. Crossword puzzles and working with your hands on hobby or work projects are made easy thanks to the two-fold magnification. The focus of its design was on user- friendli- ness and a modern style.

Overview

Safety instructions

Never look at the sun or other very bright sources of light through optical equipment!
Risk of fire!
Lenses used in optical equipment may cause considerable damage by their “burning glass effect” if used or stored improperly. Make sure that optical lenses are never left uncovered in the sunlight.
Make sure that other people and especially children are aware of this.
The MAXDetail must not be used for driving in traffic!
Protect your MADetail from impact and excessive heat! Never place the MAxDetail on heaters or in sunlight.

Adjustment

Earpiece adjustment

The plastic earpieces can be bent in the desired position without warming.
An internal metal wire ensures that the earpieces remain in this position.

Adiustment

The MAxDetail is designed for a distance of about 40 cm and offers a dioptre adjustment (option for correcting defective vision) of -3.00 dpt to +3.00 dpt. It can be adjusted for each eve individually. You can also use the dioptre adjustment to vary the glasses slightly to various distances. Sit at the appropriate application distance and put on the MAXDetail. Keep your left eye closed and turn the knurled ring [1] until your right eye can see in sharp focus. Do the same with the other eye.

Notes: Under the following circumstances, it might not be possible to see the image perfectly:

A very small or very large pupil spacing (eye spacing) can reduce the performance quality, because the image is not viewed through the optical zones of the MAXDetail anymore.
If you normally have glasses with dioptres of less than -3.00 dioptres or greater than +3.00 dioptres, the dioptre adjustment feature of the MADetail cannot entirely compensate the defective vision.
If you usually wear glasses with cylindrical lenses (e. g. for astigmatism), it might not be possible to achieve perfect focus. This depends on the strength of the cylinder.

Care instructions

MAXDetail is a high-quality, technologically advanced, complex optical aid and needs to be handled and cared for accordingly. For protection of the lenses against dust and external influences, we recommend that you store it in the case included.

Do not use alcohol or organic solvents to clean the MAxDetail.
Do not clean the MAxDetail in an ultrasonic bath!

Clean the MAxDetail with a soft cotton or linen cloth (such as cleaning cloths for eyeglasses). Moisten the cleaning cloth to remove more persistent stains (e.g. finger prints).

Technical data

Article number: 162451
Dioptre adjustment for each eye individually: -3.00 dpt to
- +3.00 dpt
Magnification: 2x
Free working distance: 400 mm
Pupil spacing: 60 mm
- 68 mm
Weight: 49 g

Guarantee

We are required by law to guarantee the function of the product described in these descriptions in respect of defects caused by manufacturing or material faults. Any damages caused by incorrect handling, including damage caused by being dropped or knocked, are not covered under the guarantee. Guarantee benefits can only be claimed through proof of purchase in the form of a sales receipt!