ESCHENBACH mobiluxLED Lighted Hand Held Magnifiers User Manual
- June 12, 2024
- ESCHENBACH
Table of Contents
ESCHENBACH mobiluxLED Lighted Hand Held Magnifiers User Manual
Product Overview
Technical Data
| Ø| |
---|---|---|---
15112| 60 mm| 12,0 dpt/3,0×| 250 mm
15113| 75 × 50 mm| 10,0 dpt/3,5×| 250 mm
15114| 75 × 50 mm| 16,0 dpt/4,0×| 180 mm
151141| 60 mm| 16,0 dpt/4,0×| 150 mm
15115| 58 mm| 20,0 dpt/5,0×| 140 mm
15116| 58 mm| 24,0 dpt/6,0×| 100 mm
15117| 35 mm| 28,0 dpt/7,0×| 60 mm
151110| `35 mm| 38,0 dpt/10,0×| 40 mm
151112| 35 mm| 50,0 dpt/12,5×| 40 mm
Introduction
You have acquired a brand name product from Escherichia that has been manufactured in Germany as per he most modern production processes. Before the first use you should have read through these instructions attentively so as to become familiar with all of the device’s functions. Mobil LED is intended for use as a visual aid, in that the product presents you with a magnified image.
Safety Instructions
-
This product is not a toy! Do not let children handle it without supervision!
-
Risk of asphyxiation! This product contains small parts that could be swallowed!
-
Danger of fire! Lenses in optical devices can cause significant damage by the focusing of light to generate heat if handled and stored improperly! Take care that you never leave uncovered optical lenses lying in direct sunlight!
-
Danger of glare and injury! NEVER look directly into the sun or other bright light sources with optical devices!
Never look directly at the light source on the underside of the housing! Risk group 1 as per EN 62471:2008. -
Protect your illuminated magnifier against impacts of all kinds, moisture and excess heat. Never lay your illuminated magnifier on a heating radiator or in direct sunlight!
-
Check the batteries regularly. Leaking batteries can cause damage to the device and it could lead to irritation if the leakage makes contact with the skin.
-
Remove the batteries from the battery compartment as soon as they are spent or if the device is to be unused for a long period of time.
-
Never subject the mobiluxLED to wetness!
-
Ensure that other people, particularly children, are aware of these risks!
Initial device operation
For equable illumination of your reading material this mobiluxLED is equipped with a high-performance LED, which is powered by 2 batteries (AA/LR6). Before the first use, you must insert the batteries.
- To do this, open the battery compartment cover (2).
- Insert 2 batteries into the battery compartment as per the alignments shown therein. Pay attention to observance of the correct polarities, otherwise the device will not work.
- Close the battery compartment.
Using the mobilized
You can use Mobil LED with your reading glasses.
- Hold the mobilux LED with the lens centrally over the text that is to be magnified.
- The optimal imaging quality with mobilux LED is to be obtained when you maintain the distance to the lens determined for you for the magnification used by you. This value (in mm) is to be found in the chapter ‘Technische Daten / Technical Data / Caratéristiques techniques’ on page 3, (Spacing lens-eye) as well as above the switch on your mobiluxL ED.
- Switch the LED light on by sliding the shifter (3 ) in the direction of the lens (4 ). If you require stronger illumination, fit the transparent LED filter cap (1) of the 3 enclosed LED filter caps, as shown in the left figure on page 3.
- After use, switch the LED light off by sliding the shifter (3) in the direction away from the lens (4).
Note: If the LED flickers, the batteries are drained and must be
exchanged for new ones. In this case, proceed as detailed in the chapter
‘Initial device operation’. If the colour of the light is unpleasant for you,
you can place one of the enclosed LED filter caps (1, orange or yellow) over
the LED, as shown in the left figure on page 3.
To protect the lens your mobilux LED is supplied with a case. To enable you to
hang your mobiluxLED around your neck it has an eyelet located on the end of
the handle and through which a lanyard, which is optionally available, can be
threaded. (Stock.-No. 15981).
Care Instructions
- When cleaning the mobilux LED do not use any soap solutions that contain softening agents, no alcohol-based or organic solvents and no abrasive detergents! The lenses could be destroyed!
- Do not clean the mobilux LED in an ultrasonic bath or under flowing water!
- Clean the Mobil LED with a soft, lint-free cloth (e.g. with a cleaning cloth for glasses). For heavier soiling (e.g. fingerprints), moisten the cloth slightly
Disposal
When the device reaches the end of its useful life, do not dispose of it with the normal household waste. Batteries and cells must not be disposed of in household waste! Ensure that they are disposed of properly!
Warranty
Within the framework of the applicable statutory provisions, we provide a warranty for the functioning of the product described in this manual with regard to faults arising in connection with manufacturing errors or material errors. In the event of damage due to improper handling, including damage from falls or impacts, no warranty claims can be accepted. Warranty claims can only be accepted upon presentation of the sale receipt!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>