ESCHENBACH MaxDetail Clip Optician in Preston Designer Glasses User Manual

ESCHENBACH MaxDetail Clip Optician in Preston Designer Glasses

Product Information

You have purchased the MaxDetail Clip, a magnifying attachment for clipping onto existing eyeglasses. This product is made by the Eschenbach company in Germany using state-of-the-art manufacturing processes. It provides double magnification, allowing you to see twice as large without straining your eyes. The modern design and easy use make it ideal for activities such as crossword puzzles and working within arm’s reach.

Safety Information

• Never look directly into the sun or other bright light sources using optical devices to avoid glare and injury.
• Be careful not to leave the optical lenses in direct sunlight as they can focus light to generate heat and cause damage.
• Inform others, especially children, about these safety measures.
• Do not use the MaxDetail Clip while driving automobiles.
• Avoid impacts and excessive heat. Do not place the MaxDetail Clip on a radiator or in direct sunlight.
• When using the product on eyeglasses with plastic lenses, be cautious to prevent scratching the lenses.
• The danger of glare and injury! Never look directly into the sun or other bright light sources using optical devices!
• The danger of fire! Lenses in optical devices can cause significant damage by focusing light to generate heat if handled or stored improperly. Be careful never to leave optical lenses lying in direct sunlight!
• Also, inform other people and children especially of this safety measure!
• MaxDetail Clip may not be used while driving automobiles.
• Protect your “MaxDetail Clip“ from impacts and excessive heat. Never lay your “MaxDetail Clip” on a radiator or in direct sunlight.
• Be particularly careful when using the product on eyeglasses with plastic lenses. When used improperly, the eyeglasses may be scratched since the lens of the product rests directly against the lens of the eyeglasses.

Adjustment

The lens of the MaxDetail Clip is designed for a working distance of about 400 mm from the eye. To attach the clip to your eyeglasses, press the clip together. When you want to stop using it, simply flip the clip up without removing it. To optimize the line of sight, the lens assembly on the clip can be moved vertically. Unscrew the lens assembly with a small Philips screwdriver and re-screw it onto the clip arm at one of the 5 possible positions. The clip should generally lie in the lower line of sight through the eyeglasses, allowing you to orient yourself in the room by looking through the upper part of the eyeglasses and over the clip.

When you wish to stop using the “MaxDetail Clip”, simply flip the clip up, it is not necessary to remove it. To allow an optimal line of sight on both large and small eyeglasses, the lens assembly on the clip can be moved vertically. To do this, it is necessary to unscrew the lens assembly with a small Philips screwdriver and rescrew it onto the clip arm at one of 5 possible positions. The clip should generally lie in the lower line of sight through the eyeglasses so that you can still orient yourself in the room by looking through the upper part of the eyeglasses and over the clip.

If you are unable to achieve good results with the MaxDetail Clip, it may be due to one of the following situations:

• Improper adjustment
• Incorrect usage
• Incompatibility with certain eyeglasses
• You may have selected a working distance that is too far or two short.
• You may be experiencing a vertical offset because you have attached the “MaxDetail Clip” at too steep an angle.
• Your pupil distance may lie outside of the pupil distance range of the “MaxDetail Clip”.

Care Instructions

Your MaxDetail Clip is a technically and optically advanced vision product. To protect the lenses from dust and external influences, store it in the provided case. Clean the clip with a soft cotton or linen cloth, preferably a lens cleaning cloth. For heavy soiling, slightly moisten the cleaning cloth. You have purchased a quality product from the Eschenbach company that was “Made in Germany” using state-of-the-art manufacturing processes. We congratulate you on your decision. MaxDetail Clip is a magnifying attachment for clipping onto existing eyeglasses. This allows you to see twice as large without straining your eyes. Crossword puzzles and working within arm’s reach, whether at home or at work, are easy thanks to double magnification. Modern design and effective, easy use were the main priorities during the development of this product.

• Do not use alcohol or organic solvents to clean the “MaxDetail Clip”!
• Do not clean the “MaxDetail Clip” in an ultrasound bath!

Clean the “MaxDetail Clip” with a soft cotton or linen cloth (e.g. lens cleaning cloth). In case of heavy soiling (e.g. fingerprints) moisten the clean-ing cloth slightly.

Technical Data

• Working distance: 350 mm from lens crown approx. 400 mm from eye
• Pupil distance range: 62 – 70 mm
• Magnification: 2x
• Field of vision: approx. 85 mm
• Weight: 23 g

Eschenbach Optik GmbH
Schopenhauerstrasse 10
90409 Nuremberg
Germany
For the authorized representative in your country please refer to:
www.eschenbach-optik.com
E 07/09 944370
Printed in Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>