aiwa AT-X80A True Wireless Earphones User Manual
- June 6, 2024
- Aiwa
Table of Contents
aiwa AT-X80A True Wireless Earphones
Product Overview
Unboxing
- AT-XB0A Earbuds
- Portable Charging Case
- USB Type-C Charging Cable
- Silicone Ear-tips (L & S Size)
- User’s Manual
Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.
Product Specifications
- Model Number; AT-XBOA
- BT Version: VS.l
- IP Rating: IPX4
- Rated Power: SmW
- Frequency Response: 20~20kHz
- lmpedance:760 ± 15%
- Sensitivity: 103dB ± 3dB
- Supported Profiles: HFP/A2DP/AVRCP
- Transmission Distance (Estimated): 10 Meters
- (No Obstacles)
- Battery (Earbuds): 3.7V/40mAh
- Battery (Charging Case): 3.7V/400mAh
- Playback/ Call Time: 4-S Hours
- Earbuds Standby Time: 50 Hours
- Charging Case Standby Time: 200 Days
- Charging Time (Portable Case): 1.5 Hours
- Charging Time (Earbuds): 1.5 Hours
- Charging Time (Portable Case with Earbuds): 3.5 Hours
- Earbuds Weight: 3.5g each
- Charging Case Weight: 35g
The above are estimated values tested in a practical environment and may v a r y u p o n individual u s a g e h a b i t s. C h a r g i n g c a s e h o l d s approximately2-3 charges o f earbud’s full battery capacity depending o n playback volume.
Product Usage Guide
Manual ON/OFF:
- Manual ON: Long press touch sensor for two (2) seconds Alternate flashing orange & green indicator light.
- Make sure earphones are fully charged before using them for the first time.
- Manual OFF: Long press touch sensor for four (4) seconds Orange indicator light lights up and extinguishes.
- AT-XSOA automatically powers off after 5 minutes of disconnection
Music Control:
- Play/Pause: Click touch sensor once (l)
- Next Song: Click touch sensor twice (2}
- Previous Song: Click touch sensor thrice (3}
Call Control:
- Answer/Hang Up : Click touch sensor once (l}
- Reject Call: Long press touch sensor for one and a half (1.5} seconds
Voice Assistant:
Activate Voice Assistant: Long press touch sensor for one and a half (7.5) seconds
Connecting the Product
- Turn on Bluetooth (BT) on your mobile device
- Turn on Earbuds (Flipping open charging case will power up earbuds)
- Search and connect to “AT-XSOA” from your mobile device
Troubleshooting
L side earbud cannot be linked with R side earbud
Solution: Place earbuds back into charging case and close the case. Re-open
the lid after a few seconds. The earbuds would now be linked to each other &
ready to be connected to your mobile device.
Only one (l} side earbud can be linked to your device
Solution: Ensure both earbuds are ON and disconnected from any devices. Click
both touch sensors four (4) times, then place earbuds back into charging case.
AT-XSOA will be ready to connect once you remove them from the charging case.
Battery & Charging
Charging Earbuds (Place them back into charging case}:
- **Charging:*** Orange Indicator Light”
- Full Charge: *Extinguished Indicator Light
- Approximate charging time: 7.5 Hours
Charging the Portable Charging Case
(Plug in USB – C Charging Cable):
- Charging:
- Digital Display flashes
- Full Charge:
- Digital Display remains lit up
Approximate charging time: 7.5 Hours
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>