niko P48LR Presence Sensor User Manual
- June 13, 2024
- niko
Table of Contents
Presence detector
353-752421
Manual
P48LR Presence Sensor
4 year warranty
Presence detector P48LR, DALI-2, master, 32-37 m, 360°, for surface mounting
Wiring
230 V – OFF
Connection diagram
This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
Dimensions
Installation
DALI power – OFF
If a grommet needs to be replaced, please make sure the new grommet is halogen-free.
Dismantling
230 V – OFF
App s ettings
230 V – ON
Factory settings| | |
---|---|---|---
Switch ON/OFF| 500 lux| 15 min
LED behaviour
230 V – ON
Green LED continuous on| | Connection OK|
---|---|---|---
Green LED breathing| | Connection OK, overrule ON|
Green LED flashing| | Warming up| Wait
Red LED continuous on| | Error| More into –> detector tool
Red LED breathing| | Warning
Blue LED flashing| | Walk test active
Detection area
Specifications
| Article number | 353-752421 |
|---|---|
| Configuration | DALI-2 master |
| Input voltage | 230 Vac ± 10 %, 50 Hz |
| Maximum power consumption | 0.6 W |
| Maximum power consumption wireless link active | 0.65 W |
| Short circuit behaviour shutdown trigger | voltage below 12 V, exceeding 1.3 s |
| Short circuit behaviour restart period | every 14 s until success |
| Detector output | DALI Broadcast/DALI Adressable |
| Maximum voltage on the DALI bus | 15 Vdc |
| Maximum guaranteed current on the DALI bus | 200 mA |
| Maximum supply current | 250 mA |
| Maximum startup time DALI | < 1200 ms |
| Maximum PIR detection startup time | 70 s |
| Maximum number of dimmable zones | 4 |
| Maximum number of control gear on the DALI bus | 64 |
| Circuit breaker | maximum MCB rating 16 A* |
| Relay contact | NO (max. µ10 A), potential-free |
| Maximum load incandescent and halogen lamps (cosφ = 1) | 2300 W |
| Maximum load fluorescent lamps (cosφ ≥ 0.5) | 1200 VA |
| Maximum load economy lamps (CFLi) | 350 W |
| Maximum load LED lamps 230 V | 350 W |
| Maximum load LED driver | 500 VA |
| Maximum load electronic transformer | 500 VA |
| Maximum switching current | 165 A/20 ms – 800 A/200 µs |
| Maximum capacitive load | 140 µF |
| Light intensity range | 20 – 2000 lux, ∞ |
| Number of channels | 1 channel |
| Switch-off delay | pulse, 20 s – 120 min, ∞ |
| Detection angle | 360° |
| Detection range (PIR) | Ø 37 m from a height of 3 m |
| Ambient temperature | -25 – +40 °C |
| Mounting method | surface-mounting |
| Mounting height | 2 – 3.5 m |
| Colour | white (RAL 9010) |
| Dimensions (HxWxD) | 100 x 100 x 70.7 mm |
| Dimensions visible (HxWxD) | 100 x 100 x 70.7 mm |
| Wire capacity | 1.5/2.5 mm² |
| Maximum range Bluetooth | 50 m |
| (free field, depending on the device) | -2 dBm |
| Maximum radio frequency power | 2.4 Ghz |
| Operating frequency | IP54 |
| Protection degree | IK04 |
Impact resistance
Modification of settings| app (iOS/Android) and 2-way Bluetooth®
communication
Halogen-free| yes
Marking| CE
- The MCB rating is limited by national installation rules.
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring scheme |
| The ambient light is too strong | Check the response value luminosity and |
raise the value if necessary
Load does not turn off| The switch-off delay is too long| Check the switch-off
delay and shorten the delay if necessary
| The detector receives false triggers| Check for any objects that may cause
false triggering and remove them from the detection range or lower the
sensitivity
App cannot connect to the detector| Bluetooth® has been disa- bled on your
mobile device| Enable Bluetooth® on your mobile device
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as
complete, correct and up to date as possible. Nevertheless, some deficiencies
may subsist. Niko cannot be held responsible for this, other than within the
legal limits. Please inform us of
any deficiencies in the manuals by contacting Niko customer services at
support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>