TOPSKY 079 Gaming Chair User Manual
- June 4, 2024
- TOPSKY
Table of Contents
TOPSKY 079 Gaming Chair
Thanks for buying our product. Please read this manual carefully before installation and use as the manual said. In order to refer more information please take care of the manual.
OVERVIEW
INSTALLATION
STEP 1
Lock the armrest to the seat base Put the armrest on the seat base and tighten
8pcs bolts【C】(M8*30)
STEP 2
Put the backrest and seat together Put the backrest and seat together as the
picture 1. Please pay attention to the red marked place ( left and right
sides) which need aim at the bolt holes.
STEP 3
Lock the backrest and seat Lock 4pcs bolts 【B】(M8*25) on the left and right
side as the picture step by step. (Begin at the right side where the tilting
handle is located. Screw both bolts on the right side half way in and then
screw in the two bolts on the left side. Now tighten the bolts on both
sides)
STEP 4
Install the recliner covers Attach the lower snap button first. Lock the Screw
D(M5*16) into the hole on the recliner cover.
- Pay attention Left and right Recliner Covers are different.
STEP 5
Install the mechanism Use 4pcs bolts【B】(M8*25) to lock the Mechanism and seat
together, and make sure the bolts are screwed in tight.
- Pay attention direction of the mechanism
STEP 6
- Install the wheel
STEP 7
- Install the gas spring
STEP 8
Put the chair body on the gas spring Aim at the top of gas spring and the
hole of mechanism, then put the chair body down.
Usage & Safety Instructions
- Sit in the center of the chair, with your back to the backrest
- Do not sit at the front edge of the chair.
- Do not stand on the chair.
- Do not use the chair with more than one person
- Do not push the chair aroundwhen a person is sitting in it.
- Do not push down on the backrest when a person is reclined.
- Do not place all your weight on the backrest only
- Do not place your hand or fingers near the recline mechanics.
