TOPSKY DF04.01 Dual Motor 3 Stage Adjustable Standing Desk User Manual
- June 14, 2024
- TOPSKY
Table of Contents
TOPSKY DF04.01 Dual Motor 3 Stage Adjustable Standing Desk
Warranty
ABOUT TOPSKY 5 YEAR WARRANTY:
This product come with 5-year warranty from the date of purchase.Any failure/function issues from normal usage will be replaced free of charge or refund once within one year of the date of purchase. A failure is a mechanical breakdown of or defect in the unit that affects the user’s ability to operate the product as intended.
WARRANTY COVERAGE:
All the parts
Not include:
Misuse or abuse of the product Customers personal preference changed Normal
appearance loss Parts lost by customer TOPSKY Accessories/Replacement Part For
out of Warranty Paid Service We also offer paid service/parts and extend
warranty for the part out of Warranty. If exceed quality warranty period, or
you have already performed a warranty service once during the period, and
still want to be able to perform the warranty service. If you ever have any
inquiry’s regarding whether or not your product is still under warranty/ how
to buy extra part, paid service just search and contact TOPSKY service team or
call us.
Caution
- Keep children and pets away from the electric high-adjustable desk during the operation. Unplug the power cord during a thunderstorm or if you do not intend to use the desk for long time.
- Make sure desktop not touch the wall.
- Ensure no obstacles in the desk’s path, and no any object above 20″ under the desk.
- Working environment temperature 0-40°C, keep products away from corrosive gas, liquid and dusty objects.
- It is strictly forbidden to disassemble the products privately to avoid that the failure of the products or the damage to the human body caused by electronic products, etc.
- Although the product with anti-collision function, in order to avoid any pinching, please ensures that hands or other parts of your body are in a safe position during the operation. Anti-collision is not enabled during all resets.
- Please read following instruction carefully before use the high-adjustable desk. The company does not bear any warranty or liability for damage and human injury caused by any abnormal operation.
- It is necessary to be reset manually after initial installation or power off.
Parts list
| No. | Part name | Qty (Pcs) |
|---|---|---|
| 1 | Foot | 2 |
| 2 | Column | 2 |
| 3 | Side bracket | 2 |
| 4 | Right rail | 2 |
| 5 | Left rail | 2 |
| 6 | Extension rail | 2 |
| 7 | M6*8 screw | 8 |
| 8 | M6*10 screw | 12 |
| 9 | M6*16 screw | 16 |
| No. | Part name | Qty (Pcs) |
| --- | --- | --- |
| 10 | ST3.5*16 screw | 4 |
| 11 | Power cord | 1 |
| 12 | Power adapter | 1 |
| 13 | Control box | 1 |
| 14 | Controller | 1 |
| 15 | Extension cable | 1 |
| 16 | Cable clip | 6 |
| 17 | M5 allen key | 1 |
Installation Instructions
Warning:
- Control box with Gyro: please fix it under the table board before the first use.
- Do not use the Guide Sleeves if the frame length needed less than 1220mm.
-
Place the right and left rails on an even surface as shown below. Insert both ends of extension rail to the right and left rails as shown below and pre-tighten the screws.
-
Place the desk columns between the left and right rails, make sure the screw holes on the frame and columns are aligned. Tighten the screws.
-
Mount the side brackets onto each side of the columns. Tighten the screws.
Installation Instructions -
Tighten the screws for desk feet and columns.
-
Please adjust and leave the side brackets to both edges of the desktop for 2”, then tighten the screws.
- Please install your control box, extension cable and power cord with screws as shown below.
-
On the bottom side of the desktop, you may take below diagram as the reference to install the power cord, power adapter and control box.
- Cables underneath the desktop can be well managed with cable clips.
Instruction
Code meaning and Trouble shooting
Code Meaning
| Code | Information | Operating |
|---|---|---|
| rES | Manual resetting | Refer to the progress of manual reset |
| ovr | Overloading | Remove the load on desktop till it less than 1330N / 136KG / |
300LBS(including the desktop) for further operation
E-2| Anti-Collision function| Control box with Gyro: please fix it under the
table board before the first use. It can be used normally after removing the
obstacle
dut| Operated continuously without suitable rest| Make the desk rest around
18minutes for further operation
Trouble shooting
| Code | Operating |
|---|---|
| E-4 | The height between two legs exceed 1 inch. Stop the operation and reset, |
refer to Manual reset
E-3| Check the cables and ensure they are well connected, and the height-
adjustable desk can be used normally after manual reset
Sot
| The control box detect the current is abnormal, it may be caused by overloading or signal interference. Please remove the load or power off to check all the cables’ connection, and then power on again.
Technical Data
| Item | Data |
|---|---|
| Input voltage | 100~240V AC |
| output voltage | 29V DC |
| Max loading | 1330N / 136KG / 300LBS |
| Height range (without desktop) | 600~1250mm ( 23.6″～49.2″) |
| Duty cycle | 2 min on/ 18 min off |
*You can check the installation guide from this YouTube video: https://youtu.be/3vXltfJSem4 Or scan this QR code to check the video
*About how to use, you can see YouTube video https://youtu.be/HFkRBbSdqm8 You can also scan the QR code to check it: