EBECO Wallflex 500 EB-Connect WiFi User Manual
- June 13, 2024
- EBECO
Table of Contents
EBECO Wallflex 500 EB-Connect WiFi
Thank you!
Thank you for choosing Ebeco! Good luck with your WiFi Ready product. We hope
you will enjoy it for a long time to come.
With this accessory you can easily control the heat with our app, Ebeco
Connect or with the open source API. Ebeco Connect can be downloaded from
Google Play or App Store.
What to do EB-Therm 500
-
Lift the front panel and frame by pushing a screwdriver into the groove on the underside, see picture. Lift the front panel upwards until you hear a “click”.
-
Use a screwdriver to gently loosen the front panel.
-
Press in the wifi module until you hear a “click”.
-
Replace the front panel by first hooking it into the lower part, see picture. Then push in the upper part of the front with your thumb until you hear a “click.
-
Your thermostat will now start automatically. If your thermostat was turned off when the wifi module was installed, you must first press X. Follow the on-screen instructions.
What to do Wallflex 500
Download the Ebeco Connect app from Google Play or App Store and follow the instructions.
Technical facts
Frequency band 2,4 GHz
Max output 20 dBm
Approval CE
Protocol IEEE 802.11b/g/n
This product uses open source software. For more information see ebeco.com. Updated automatically
Warranty
Ebeco AB provides a 5-year product warranty for material defects on the wifi
module. For more detailed warranty terms, see ebeco.com.
The product complies with Directive 2014/53/EU. Full insurance is available at
Ebeco’s website.
EBECO AB
Lärjeågatan 11
415 02 Göteborg, SWEDEN
Phone +46 31 707 75 50
ebeco.se
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>