JBC DPM-B DPM Manual Solder Paste Dispenser Instruction Manual
- June 13, 2024
- JBC
Table of Contents
JBC DPM-B DPM Manual Solder Paste Dispenser
This manual corresponds to the following reference:
DPM-B
Packing List
The following items are included:
Features
Syringe Sets*
The following syring barrel sets are available at www.jbctools.com
3cc Syringe Barrel Set Ref. SB03CC includes:
-
Barrel 5 units
Seal 5 units -
Cap 5 units
-
Adapter 1 unit
5cc Syringe Barrel Set Ref. SB05CC includes
- Barrel 5 units
- Seal 5 units
- Cap 5 units
OPERATION
The DPM works with 3cc and 5cc Syringes. Ask your solder paste supplier for this format or fill the JBC syringe barrel with solder paste.
-
Seal Placement
Take the barrel filled with solder paste and place the corresponding seal into the barrel. -
. Plunger Placement
-
- Pay attention to the fact that the plunger enters with its cylindrical part in the syringe barrel and the direcction of the teeth angle corresponds to the upper Otherwise, the DPM does not work properly.
-
Insert the plunger into the seal and press the seal against the solder paste to eliminate the air inside the barrel.
-
Tip Placement Thread the tip onto the syringe barrel
-
Adapter Use (for 3cc Syringe only) For 3cc syringes the adaptor is needed. Assemble the adapter by clipping onto the barrel
-
Lever Lifting
Open the DPM by lifting its upper part and the lever. -
Syringe Insertion
-
Insert the prepared syringe, including the plunger, into the DPM.
-
Push the syringe down until it snaps into place and the barrel flange rests in the opening
-
Lever Positioning
Lower the lever until it fits in with the plunger. -
Dispensing
Press the DPMs upper part downwards until solder paste comes out.
Note : When the lever reaches the end of its stroke, the plunger is reloaded automatically by lifting and pressing down the DPMs upper part, the lever automatically jumps into the next plunger groove and the solder paste can be dispensed again.
Dispensing Needles and Tapered Tips
JBC offers two different types of dispensing tips, each type with different tip diameters. Availabel at www.jbctools.com.
Dispensing Needles with Stainless Steel Tips
STYLE
|
Ref.
|
COLOR
| SOLDER PASTE
(recomended)
|
GAUGE
|
ØID
(mm/in)
|
ØOD
(mm/in)
|
LENGTH
(mm/in)
| TOTAL LENGTH
(mm/in)
|
QTY
---|---|---|---|---|---|---|---|---|---
Stainless Steel Needles
| ND18S6| Green| Type 2| 18| 0.84/0.050| 1.27/0.033|
6.5/0.26
|
24/0.94
|
10
ND20S6| Pink| Type 3| 20| 0.61/0.036| 0.90/0.024
ND21S6| Purple| Type 3| 21| 0.51/0.032| 0.82/0.020
ND22S6| Blue| Type 3| 22| 0.41/0.028| 0.72/0.016
ND23S6| Orange| Type 3| 23| 0.31/0.025| 0.63/0.013
ND25S6| Plan Red| Type 4| 25| 0.25/0.020| 0.50/0.010
ND27S6| Clear| Type 5| 27| 0.2/0.016| 0.40/0.008
ND30S6| Lavender| Type 6| 30| 0.15/0.012| 0.31/0.006
Tapered Tips
STYLE
|
Ref.
|
COLOR
| SOLDER PASTE
(recomended)
|
GAUGE
|
ØID
(mm/in)
|
ØOD
(mm/in)
| TOTAL LENGTH
(mm/in)
|
QTY
---|---|---|---|---|---|---|---|---
Tapered Tips
| ND18P| Green| Type 2| 18| 0.84/0.033| 1.27/0.050|
32/1.26
|
10
ND20P| Pink| Type 3| 20| 0.64/0.024| 1.20/0.048
ND22P| Blue| Type 3| 22| 0.41/0.016| 0.72/0.028
ND25P| Red| Type 4| 25| 0.25/0.010| 0.50/0.020
ND27P| Clear| Type 5| 27| 0.2/0.008| 0.40/0.016
Specifications
- DPM Manual Solder Paste Dispenser Ref.: DPM-B
- Dimensions/Net Weight:
- 130 x 66 x 16 mm / 0.05 kg (L x W x H)
- 12 x 2.60 x 0.63 in / 0.11 lb
- Package Dimensions/Weight:
- 155 x 55 x 45 mm / 074 kg (L x W x H)
- 6.10 x 2.17 x 1.77 in / 0.16 lb
- Complies with CE standards ESD Safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>