VIVO DESK-V001G 25 Standing Desk Converter Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
VIVO DESK-V001G 25 Standing Desk Converter
Product Information
- Product Name: Black 25 Desk Riser
- SKU: DESK-V001G
The Black 25 Desk Riser is a versatile and adjustable desk riser that allows you to convert your existing desk into a standing desk. It is designed to improve ergonomics and promote a healthier work environment. The desk riser comes with a keyboard tray for added convenience and functionality.
Package Contents:
- (x1) Desk (A)
- (x1) Keyboard Tray Bracket (B)
- (x1) Keyboard Tray (C)
- (x4) S-A Screws
- (x4) S-B Screws
- M5x12mm Screw
- M6x16mm Screw
Weight Capacity: 17.6 lbs (7.98 kg)
Product Usage Instructions
- Carefully remove the desk and its contents from the packaging and place it on a flat surface. Make sure the desk (A) is raised.
- Attach the Keyboard Tray Bracket (B) to the Desk (A) using the M6x16mm Screws (S-B). Tighten the screws with a Phillips screwdriver.
- Mount the Keyboard Tray (C) to the Keyboard Tray Bracket (B) using the M5x12mm Screws (S-A).
- To adjust the height of the desk, squeeze the handle on the right side and raise or lower the Desk (A) to the desired height.
- Place items on the Desk (A) as desired, but do not exceed the weight limit of 17.6 lbs.
- If the lock is not releasing properly to change the desk height, adjust the position of the black tube containing the steel release cable. Turn the nuts at the end of the tube just behind the handle to move the tube away from the handle until the cable has proper tension, then tighten the nuts.
Caution:
- Keep the monitor and laptop base fully on the desktop.
- Follow the cable routing instructions to avoid pinching cables.
- Leave enough slack in the cable to allow for full range of vertical motion (16 / 41 cm).
- Raise the desktop slowly to keep items stable.
- Failure to follow these instructions may result in property damage and/or personal injury.
If you have any questions or need assistance, you can contact our dedicated support team during office hours:
Support Contact:
- Phone: 309-278-5303
- Email: help@vivo-us.com
- Live Chat: Visit www.vivo-us.com and chat with an agent
We strive to provide quick and efficient support, and our average resolution time during office hours is 5 minutes and 4 seconds. For more information about our products, please visit our website at www.vivo-us.com.
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in
serious injury.
ASSEMBLY STEPS
-
STEP 1
Carefully remove desk and contents from packaging and place on flat surface. Desk (A) must be raised. -
STEP 2
Attach Keyboard Tray Bracket (B) to Desk (A) with M6x16mm Screws (S-B), and tighten with a Phillips screwdriver.
-
STEP 3
Mount Keyboard Tray (C) to Keyboard Tray Bracket (B) using M5x12mm Screws (S-A). -
STEP 4
Squeeze the handle on the right side, then raise or lower Desk (A) to desired height.
-
STEP 5
Place items on Desk (A) as desired. Please do not exceed weight limit of 17.6 lbs. -
STEP 6
If lock is not releasing properly to change desk height, adjust the position of the black tube containing the steel release cable. Turn the nuts at the end of the tube just behind the handle as shown below, moving the tube away from the handle until the cable once again has proper tension, then tighten the nuts.
CAUTION!
- Keep monitor and laptop base fully on the desktop.
- Follow the cable routing instructions to avoid the potential to pinch cables.
- Leave enough slack in cable to allow for full range of vertical motion (16” / 41 cm).
- Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share? Tag us in your photo!
@vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303
- AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com
- Chat live with an agent!
- AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com
- AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-v001g
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 25" Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>