Tenda W30E Dual Band Wifi 6 Wireless Hotspot Router Installation Guide

LED indicators, ports and button
Quick Installation Guide
AX3000 Dual Band Wi-Fi 6 Wireless Hotspot Router W30E

Package contents

• Wireless Hotspot Router x 1
• Powers adapter = 1
• Quick installation guide x 1

http://download.cloud.tenda.com.cn/down/app
Scan the QR code or search tor Tera WIFiin App StareyGoogte Play.
Opsn the Tanda WE: App, and Connect 0d the WAFi network of the router for App management.

Please read this quick installation guide before you start.
For product or function details, please go to www.tendacn.com to download the user guide.

transmitted.
Blinking| A USB device is connected to the router, and data is being transmitted due to the read-write operation.
Off| No USB device is connected to the router or a USB device is connected improperly.
WiFi| Solid on| At least the 2.4 GHz or 5 GHz wireless network is enabled.
Fast blinking| The router is in cable-free networking with other devices. After the networking is done, the indicator becomes solid on.
Off| The wireless function is disabled.
SYS| Solid  on| The system is starting.
After startup, it indicates that the system is faulty.
Blinking| The system is working properly.
Off| The system is not working.
Activity| Solid on| No data is being transmitted over the port.
Blinking| Data is being transmitted over the port.
Off| The port is disconnected, or connected improperly.

Tips

• The router supports wall mounting (two mounting holes on the bottom). The recommended parts are as follows:
  Expansion bolts: height: 6.6 mm, inner diameter: 2.4 mm, langth: 26.4 mm
  Screws: PA3*14 mm, head diameter: 5.2 mm, head height: 1.8 mm

• The router is only suitable for mounting at heights = 2m.

Use the included power adapter to supply power to the router.
Reset| Reset button.
When the SYS LED indicator is blinking, hold down the Reset button for about 8 seconds, then release when all LED indicators light up. The router is reset to the factory settings successfully.
WAN| Gigabit intemet port.
Used to connect the router to the intemet.
WAN/LAN| By default, they are gigabit LAN ports.
You can log in to the web UI of the router to change them to WAN ports as needed.
LAN| Gigabit LAN port.
Used to connect to wired devices, such as computers, switches, or access points.
USB| USB port.
Used to connect to a portable USB device.

Connect your router

1. Connect the included power adapter to the Power jack of the router to power it on.
2. Use an Ethernet cable to connect an Ethernet jack or a LAN port of your modem to the WAN port of the router.
3. Connect your computer to a LAN port of the router, or connect your WiFi-enabled device, such as a smartphone, to the wireless network of the router.
   *The default SSID is shown on the label of the router. By default, it has no WiFi password.

Configure your router

Tips

• You can perform quick setup either using a computer or a smartphone. Computer és used for illustration here.
• If a smartphone is used, disable its Mobile Data function

Step 1: Start a web browser on the computer connected to the router and visit tendawifi.com or 192.168.0.1.
Step 2: Click Start, then the system automatically detects your internet connection type.

Step 3: After detection completed, just follow the on-screen instructions to set up your router.
PPPoE is used for illustration here. Enter the PPPoE Username and
PPPoE Password provided by your ISP, and click Next.

Step 4: Customize the SSID (WiFi name) and WIFI Password as needed.
By default, the WiFi Password is set as the Login Password. You can deselect the check box and customize them separately.
Step 5: Click Next.

Tips
WIFI Password is used for connacting your wireless network, vinwie Login
Password is used for logging in to the web UI of the router.

Done.
To access the intermit with:

• Wireless clients: Connect your wireless clients to the SSID with the WiFi password you set.
• Wired clients: Connect the wired clients to LAN ports of the router.

FAQ

I cannot log in to the web UI! of the router by visiting tendawifl.com or 192.168.0.1. What should I do?

Try the following solutions: - For configuration using a smartphone, ensure that: (1) Your smartphone has been connected to the wireless network of the router. (2) Its Mobile Data function is disabled. - For configuration using a computer, ensure that your computer has been securely connected to the LAN port of the router, and the corresponding activity LED indicator lights up. - Reset the router. When the SYS LED indicator is blinking, hold doven the Reset button for about 8 seconds, then release when all LED indicators light up. The router is reset to the factory settings successfully.

My computer or smartphone cannot access the internet after configuration. What should | do?

Try the following solutions: - Log in to the web UI of the router, and check if the router is connected to the internet properly. If not, navigate to the Internet Settings page, and follow the on-screen instructions to solve it. - If the wireless network is inaccessible: (1) Check if your wireless clients have been connected to the correct SSID (You can check the SSID on the Wireless page of the web UN, (2) If they have been connected to the correct SSID, but still cannot access the internet, forget this WiFi network, then try reconnecting to it. - If the computer connected to the router cannot access the internet, ensure that the computer is set to Obtain an IP address automatically and Obtain DNS server address automatically. - Log in to the web UI of the router, and check: if your clients are added into the blacklist. If yes, unblock them. - lf the problem persists, consult your ISP.

Why cannot my wireless cilents sean the wireless signals of the router?

Check if the WiFi LED indicator of the routes lights up. If not, connect your computer to a LAN port of the router using an Ethernet cable, log in to its web Ul, choose Wireless > Wireless Settings, and try the following solutions:

• Check if the wireless network of the router is enabled. If not, anable it and click Save. Then rescan using your smartphone. - If the wireless network is already enabled, click Expand, and check if Hide SSID is enabled. If yes, disable it, and click Save. Then rescan using your smartphone. - By default, the 2.4 GHz and 5 GHz SSIDs of the router are unified. To customize the 5 GHz wireless network of the router separately, disable Unity 2.485 GHz SSID, and the 5 GHz configuration part appears. - Only 5 GHz-compiiant wireless clients can scan the § GHz SSID.

CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio mterference, in which case the user may be required to take adequate measures.
Operations in the 5.15-5.25 GHz band are restricted to indoor use only.
This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body.
The mains plug is used as disconnect device, the disconnect device shall remain teadily operable.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type W30E is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.tendacn.cam/download/list-9.html

Operating Frequency:
2.4 GHz: 2412-2472 MHz
5 GHz: 5150-5250 MHz
EIRP Power (Max.):
2.4 GHz: 19.9 dBm
5 GHz: 22.8 dBm
Software Version:
V16.01.0.X

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These linuts are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can rachate radio frequency energy and, if not it instalted and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not cour in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device is for indoor usage only.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this dence must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body.

Caution:
Any changes or modifications not expressly approved by the pasty responsible for compliance could void the user’s autharity to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operating Frequency: 2412-2462 MHz; 5150-5250 MHz; 5725-5850 MHz
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.

Safety Precautions

Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents The waming and danger items in other documents do not cover all the safety precautions that must be followed. They are only supplementary information, and the installation and maintenance personnel need to understand the basic safety precautions to be taken.

• Do not use the device in a place where wireless devices are not allowed.
• Please use the included power adapter.
• Mains plug is used as the disconnect device, and shall remain readily operable.
• The power socket shall be installed near the device and easily accessible.
• Operating environment: Temperature: 0°C – 40°C; Humidity: (10% – 90%) RH, non-condensing: Storage environment: Temperature: -40°C – 70°C; Humidity: (5% – 90%) RH, non-condensing
• Keep the device away from water, fire, high electric field, high magnetic field, and inflammable and explosive items.
• Unplug this device and disconnect all cables during lightning storms or when the device is unused for long periods.
• Do not use the power adapter if its plug or cord is damaged.
• If such phenomena as smoke, abnormal sound or smell appear when you use the device, immediately stop using it and disconnect its power supply, unplug all connected cables, and contact the after-sales service personnel.
• Disassembiing or modifying the device or its accessories without authorization voids the warranty, and might cause safety hazards.

For EU/EFTA, this product can be used in the following countries:

| BE| BG| CZ| DK| DE| EE| IE| EL| ES| FR| HR| IT| CY| LV
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
LT| LU| HU| MT| NL| AT| PL| PT| RO| SI| SK| FL| SE| UK(NI)

Technical Support
Shenzhen Tenda Technology Co., Ltd.
Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District, Shenzhen,
China. §18052
USA hotline: 1-800-570-5892
Toll Free: 7 x 24 hours
Canada hotline: 1-888-998-8966
Toll Free: Mon – Fri 9 am – 6 pm PST
Hong Kong hotline: 00852-81931998
Global hotline: +86 755-2765 7180 (China Time Zone)
Website:http://www.tendacn.com
E-mail: support@tenda.com.cn

Copyright
® 2022 Shenzhen Tenda Technology Co., Lid. All nghts reserved.
Tanda is a registered trademark legally held by Shenzhen Tenda Technology Co., Lid.
Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.

V1.0 Keep for future reference

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>