MEAN WELL RD-65A Serie Dual Output Switching Power Supply Owner’s Manual
- June 13, 2024
- MEAN WELL
Table of Contents
MEAN WELL RD-65A Serie Dual Output Switching Power Supply
Features
- Universal AC input/ Full range
- Protections: Short circuit/ Overload/ Over voltage
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- All using 105°C long life electrolytic capacitors
- Withstand 300VAC surge input for 5 second
- High operating temperature up to 70″C
- Withstand 5G vibration test
- High efficiency, long life and high reliability
- 3 years warranty
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
SPECIFICATION
MODEL | RD-65A | RD-65B |
---|---|---|
OUTPUT | OUTPUT NUMBER | CH1 |
DC VOLTAGE | 5V | 12V |
RATED CURRENT | 6A | 3A |
CURRENT RANGE Note.6 | 0-8A | 0-4A |
RATED POWER Note.6 | 66W | 68W |
RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 120mVp-p |
150mVp-p
VOLTAGE ADJ. RANGE| CH1: 4.75 – 5.5V| CH1: 4.75- 5.5V
VOLTAGE TOLERANCE Note.3| ±2.0%| ±6.0%| ± 2.0%| +4,-8%
LINE REGULATION Note.4| ±0.5%| ±1.5%| ±0.5%| ±2.0%
LOAD REGULATION Note.5| ±0.5%| ±3.0%| ±0.5%| ±6.0%
SETUP, RISE TIME| 500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full
load
HOLD UP TIME (Typ.)| 60ms/230VAC 14ms/115VAC at full load
INPUT| VOLTAGE RANGE| 88- 264VAC 125- 373VDC (Withstand
300VAC surge for 5sec. Without damage)
FREQUENCY RANGE| 47- 63Hz
EFFICIENCY(Typ.)| 78%| 77%
AC CURRENT (Typ.)| 2A/115VAC 1.2A/230VAC
INRUSH CURRENT (Typ.)| COLD START 50A/230VAC
LEAKAGE CURRENT| <2mA/ 240VAC
PROTECTION| OVERLOAD| 110 – 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is
removed
OVER VOLTAGE| CH1: 5.75- 6.75V
Protection type: Hiccup mode, recovers automatically after fault condition is
removed
ENVIRONMENT| WORKING TEMP.| -25 – +70°C (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 – 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40- +85°C, 10-95% RH
TEMP. COEFFICIENT| ± 0.03%/°C (0 – 50°C )on +5V output
VIBRATION| 10-500Hz, 5G 10min./1cycle, period for60min. each along X, Y,
Z axes
SAFETY & EMC (Note 7)| SAFETY STANDARDS| UL62368-1, TUV BS
EN/EN62368-1 , EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-0/P, I/P-FG, O/P-FG:100M Ohms/ 500VDC / 25″C/
70% RH
EMC EMISSION| Compliance to BS EN/EN55032 (CISPR32) Class B, BS
EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS
EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, EAC TP
TC 020
OTHERS| MTBF| 2940.2K hrs min. Telcordia SR-332 (Bellcore);
541.0K hrs min. MIL-HDBK-217F (25’C)
DIMENSION| 129’98’38mm (L’W’H)
PACKING| 0.44Kg; 30pcs/14.2Kg/0.72CUFT
NOTE|
- All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- Tolerance: includes set up tolerance, line regulation and load regulation, when multi-channel output, it is recommended that CH1 load> 10%.
- Line regulation is measured from low line to high line at rated load.
- Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
- Each output can work within current range. But total output power can’t exceed rated output power.
- The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm’360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
- The ambient temperature derating of 3SC/1000m with fanless models and of 5″C/1000m with fan models for operating altitude higher than 2000m(6500ft) Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
Mechanical Specification
Terminal Pin No. Assignment
Pin No. | Assignment | Pin No. | Assignment |
---|---|---|---|
1 | AC/L | 4,6 | DC OUTPUT COM |
2 | AC/N | 5 | DC OUTPUT +V2 |
3 | FG ½ | 7 | DC OUTPUT +V1 |
Block Diagram
Derating Curve
Output Derating VS Input Voltage
Customer Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>