Shenzhen Jonter Digital Co Ltd D127 Bluetooth Speaker User Guide

Shenzhen Jonter Digital Co Ltd D127 Bluetooth Speaker

PRODUCT STRUCTURE

1. +Volume/Next Song
2. Power On/Off/Ploy/Pause/Answer/Hang Up/TWS
3. -Volume/Previous Song
4. Charging port USB-C
5. LED
   

PACKING LIST

Sonic Clip xl
Charging Cable xl
User Manual

POWER ON/OFF

In shutdown mode, press and hold the power on/off button for about 2 seconds to turn on the speaker, and you can hear the power-on beep. To turn off the sound, please press and hold the power on/off button again for about 2 seconds, and you can hear the shutdown sound.

Note: If it is not connected to a BT device after turning it on, the speaker will shut down in about 10 minutes.

Short Press the Play/Pause once to answer incoming calls.

END THE CALL

Short Press the Play/Pause once to end the current call

DECLINE INCOMING CALLS

Double click the Play/Pause to reject an incoming call

PLAYING MUSIC

1. Short press the Play/Pause to Play/Pause.

2. Double click the”-” for PREV

3. Double click the”+” for NEXT

4. Short press the “-” for VOLS.
   Short press the”+” for VOL+

5. Long press the”-” for quick VOL-

6. Long press the”+” for quick VOL+

RESET DEVICE

When the device is powered on, hold the  power button for 5 seconds to reset the device.

CHARGING

For a better experience, you need to fully charge the speaker before using it.
The package includes a usb-c charging cable (only charging, no data transmission function), which can be used with other USB-compatible standard charging devices. Use a 5V/1a Or Above adapter (not included) for charging.

Note: Do not charge if the cable is wet or damaged.

BT CONNECTION

When turned on for the first time or if there is no BT device connected, the speaker will automatically enter the waiting connection mode.
If a BT device is connected, press the + and – keys at the same time to disconnect the current connection to connect with other devices.
When connecting, enable the Beta Function of your phone and search for “sonic clip” to connect. After the connection is successful, you will hear a prompt tone and the indicator light will change from flashing to solid.

TRUE WIRELESS STEREO (TWS) FIT FOR TWO SONIC CLIP SPEAKERS

Turn on the two Sonic Clip speakers, which are powered on and not connected to a BT device (such as a mobile phone).

Press the on/off button twice quickly on one of the speakers, you will hear a voice prompt, and the two speakers will automatically pair. After the connection is successful, the indicator light of the main speaker will flash and the indicator light of the secondary speaker will stay on.

Enable the BT function on your mobile phone and search for “Sonic Clip” to connect After the connection is successful, you will hear a voice prompt, the indicator light on the main speaker will turn solid, and the indicator light on the secondary speaker will stay solid.

LED INDICATOR/VOICE GUIDE

The device is on – The whittle LED Light is on and you hear a Power-on beep.
The device is off – The white LED Light is off and you hear a Shut-down tone.
The device is not connected to BT – White LED Light flashes.
The device is connected to BT – White LED Light is on and you hear a successful connection sound.
The device is low battery – Red LED Light is flashing and you hear a low battery beep.
The device is charging – Red LED Light is on.
The device is done charging – Red LED Light is off.

WARNINGS

Before the first use please fully charge the sonic clip.
It is not recommended to replace the battery privately without permission. The battery must not be exposed to excessive heat such as sunlight, fire or similar conditions.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and con radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the -equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or on experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2AB9S-D127

WARRANTY INFORMATION

At ZIZO, we are 100% committed to your satisfaction. We stand behind our products and offer a 1 year manufacturer warranty against defects in materials or workmanship of your new ZIZO Sonic Clip.

Should you find your item to be defective, simply visit zizowireless.com/warranty to submit a brief Warranty Service Request form. Warranty applies to products purchased from ZIZO Authorized resellers. International product registration is not available at this time. U.S. Customers Only.

CONTACT US

ZIZO CUSTOMER SERVICE

EMAIL
info@zizowireless.com

TELEPHONE
+1 909-444-7992 (English)

WEBSITE
zizowireless.com/support

@ZIZOWIRELESS ZIZOWIRELESS.COM

@2024 ZIZO, All Rights Reserved. Other trademarks and trade names are those of their respective owners. Pictures shown ores for illustration purposes only. Actual product may vary due to product enhancement. To provide cocurated product information, specifications, and features, ZIZO may make real-time adjustments to the preceding specifications, so that they match the product performance, specifications, indexes, and components of the actual product. Product information is subject to such changes and adjustments without notice.
‘Images on packaging used for illustration purposes. Actual product may vary due to continuous refinements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>