Rebel KOM0944 Portable Wireless Speaker Owner’s Manual
- June 6, 2024
- Rebel
Table of Contents
Rebel KOM0944 Portable Wireless Speaker Owner's Manual
SAFETY INSTRUCTIONS
- Producer is not responsible for damages caused by inappropriate handling and using of the device.
- Keep the device out of the reach of children. Do not leave children unsupervised with the product. Children should be supervised to ensure that they do not play with the appliance.
- Never use a damaged appliance. If it has been damaged, please get it checked or repaired in an approved service center.
- Do not attempt to repair this appliance yourself, only authorized and qualified personnel may repair this device.
- Do not disassemble the product.
- Protect the product from water, moisture and humidity. Do not splash water onto the product.
- Protect this device from direct sunlight, sources of heat and keep it in a dry place with proper ventilation.
- Use only the accessories provided. Unauthorized accessories may damage the product.
- Clean this product with soft, slightly damp cloth. Never use any chemical agents to clean this device.
PRODUCT DESCRIPTION
-
microUSB port (charging)
-
Line input (3,5 mm jack)
-
USB port
-
Power switch
-
/ V-
• In USB/memory card mode press to select previous track.
• In FM mode press to select the previous preset radio station (after an automatic radio stations search has been executed).
• Press and hold to decrease volume. -
Mode button- press to change between modes
-
/ V+
• In USB/memory card mode, press to go to the next track.
• In FM mode, press to select the next preset radio station (after an automatic radio stations search has been executed).
• Press and hold to increase volume. -
/ SCAN
• In USB/memory card mode, press to play/pause.
• In USB/memory card mode, press and hold repeatedly to select one of the playback sequencing modes (All-play all tracks in sequence; Random- play in random; Single repeat one track; Fold- repeat all tracks in a folder).
• In FM mode, press and hold to execute an automatic radio stations programming (it is recommended to execute an automatic programming before first use of radio on this device).
• In AUX and FM radio mode, press to mute/unmute. -
MicroSD card slot
-
Charging indicator light:
• Red when the charger is connected/the device is charging;
• Blue when the device is fully charged.
BLUETOOTH PAIRING MODE
- Turn on the device.
- Press the Mode button to enter Bluetooth mode.
- Switch on Bluetooth function on your external device and search for other available Bluetooth devices.
- Pair with device named KOM0943; insert default password “0000” if necessary.
- The speaker will prompt the successful pairing between the devices.
- Play music directly from your external device.
FM RADIO
Before first use of the radio on this device run an automatic station search.
Repeatedly press Mode button to enable FM radio mode. Press and hold /
SCAN button to run an automatic programming. Found stations will be saved
on preset stations list. Press or to go to previous / next station on the
preset list.
AUX MODE
- Make sure the device is turned on.
- Press the Mode button to enter AUX mode.
- Connect one end of 3,5 mm jack cable with the line input of the speaker.
- Connect the other end with the external device’s line output.
CHARGING
- Connect one end of USB cable with the microUSB port of the speaker.
- Connect the other end with the AC charger or compatible PC USB port.
- When the speaker is charging, red LED is on.
- When the device is fully charged, blue LED is on.
Note: Make sure the device is fully charged before first use.
SPECIFICATIONS
-
Output power: 2x 5 W
-
Frequency response: 100 Hz – 20 kHz
-
Speaker: 2x 2,75”
-
Impedance: 4 Ω
-
Distortion: ≤ 1%
-
S/N ratio: ≥ 85 dB
-
Bluetooth 5.0
-
Bluetooth range: up to 10 m
-
FM radio (60 preset station memory)
-
Inputs:
• Line input (jack 3,5 mm)
• USB port
• microUSB port (charging)
• microSD card slot (up to 32 GB) -
Working time: up to 2 h (full volume)
-
Battery capacity: 1800 mAh
-
Charging voltage: 5 V; 500 mA
-
Set includes: USB charring cable, belt
“The LECHPOL ELECTRONICS Sp. z o.o. Sp.k. company declares that product KOM0943 is consistent with the essential requirements and other relevant provisions of directive 2014/53/UE. The proper declaration for download from www.lechpol.eu”
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska, 08-400 Miętne.
Documents / Resources
|
Rebel KOM0944 Portable Wireless
Speaker
[pdf] Owner's Manual
KOM0944, Portable Wireless Speaker
---|---
|
Rebel KOM0944 Portable Wireless
Speaker
[pdf] Owner's Manual
KOM0944, Portable Wireless Speaker
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>