Yongxin Electronic Factory YX-388 Embedded Wireless Charger Instruction Manual
- June 13, 2024
- Yongxin Electronic Factory
Table of Contents
Yongxin Electronic Factory YX-388 Embedded Wireless Charger
Product Information
The product is a unit that operates according to the guidelines set forth by the Federal Communications Commission (FCC). It is designed to comply with part 15 of the FCC Rules, which ensures that the device does not cause harmful interference and can accept any interference received. The equipment also adheres to the FCC Radiation exposure limit for uncontrolled environments.
It is important to note that any changes or modifications made to the unit without explicit approval from the responsible party may void the user’s authority to operate the equipment. To ensure compliance and safe operation, it is essential to follow the provided usage instructions.
Product Usage Instructions
-
Install the equipment in a suitable location, ensuring a
minimum distance of 20cm between the radiator and your body. -
Do not attempt any changes or modifications to the unit without explicit approval from the responsible party.
-
Operate the equipment within the guidelines provided in the user manual.
-
Ensure that the device does not cause harmful interference to other devices.
-
Accept any interference received by the device, including interference that may cause undesired operation.
-
If you encounter any issues or have questions about the product, refer to the user manual for troubleshooting steps or contact customer support for assistance.
Product parameters
- Eco-friendly aluminum alloy+acrylic.
- Input 5V/3A, 9V/2.2A.
- Output 15W is compatible with 10W, 7.5W, and 5W.
- Product size: 76 76 16.6mm.
- The diameter of the matching hole is 6mm.
Use method
- Install the product into the hole of the table.
- Connect the USB cable to a DC power adapter.
- After the adapter is connected to the power, place thephone in the wireless charging position and charge it by itself.
- The charging icon is displayed on the phone, if there is no charging, please move the phone to adjust the sensing location.
FCC STATEMENT
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subiect to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>