SMART Ultra HD Camera
User guide
SWC-120UHD | C120-1

Learn more
This guide and other resources for SMART Ultra HD Camera are available in the Support section of the SMART website (smarttech.com/support). Scan this
QR code to view these resources on your mobile device.

https://support.smarttech.com

Important information

Warning
For indoor use only
Important
This product may contain substances that are candidate SVHCs under the EU REACH Regulation (EC) 1907/2006. Check
https://echa.europa.eu/scip-database for the latest information.

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their expense.

Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance of 20cm between the radiator & your body.
FCC
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: C120-1
Responsible Party – U.S. Contact Information
SMART Technologies Inc.
2401 4th Ave, 3rd Floor
Seattle, WA 98121
compliance@smarttech.com

Innovation, Science, and Economic Development Canada Statement
This device complies with CAN ICES-003(A) / NMB-003(A) of the Innovation, Science and Economic Development Canada Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

EU Declaration of Conformity
Hereby, SMART Technologies ULC declares that the C120-1 complies with Directive 2014/30/EU. The full text of the EU and UK declaration of conformity is available at the following Internet address: smarttech.com/compliance
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold, and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment regulations (WEEE and Battery Directive)
Electrical and electronic equipment and batteries contain substances that can be harmful to the environment and to human health. The crossed-out wheeled bin symbol indicates that products should be disposed of in the appropriate recycling stream and not as regular waste.
Batteries
The SMART Ultra HD Camera remote contains two AAA batteries. Recycle or dispose of batteries properly.
See smarttech.com/compliance for more information.

Welcome

About this guide
This guide is for users who set up and use the SMART Ultra HD Camera in their organizations.
It includes information about setting up the camera and using the camera’s on- screen display menu and software.
For more information, such as videos, training, and how-to topics, visit support.smarttech.com/docs/redirect/?product=smartultrahdcamera.

Features
The SMART Ultra HD Camera 120 is a 4K Ultra-HD camera with ePTZ. Easily install the camera on a SMART Board® interactive display. The camera can automatically frame people meeting in a boardroom.

• 10x digital zoom 138°( D) /120°(H)/68°(V)
Function|

• Automatic framing
• UVC USB communication protocol
• Supports ePTZ for Windows and Mac computers

Physical construction| • Sliding cover for the camera
Supported operating systems| • Windows® 10 or later
• macOS 10.10 or later
• Android™ 11
• Linux® 4.9.84
---|---
Supported SMART hardware| • SMART Board QX Pro series
• SMART Board® 6000S and 6000S Pro series
• SMART Board MX (V4) and MX (V4) Pro series

Components

when not in use.
3| Camera lens| Keep clean to ensure best picture quality.
4| USB 3.0 Type-B| Use cables provided with the camera.

Installing and connecting your camera

You or your organization’s installers can install the camera on a supported SMART Board interactive display’s following the camera’s installation instructions: SMART Ultra HD Camera illustrated installation instructions.

Caution
Do not install or remove the camera while the display is turned on. Ensure the power switch on the back of the display is in the OFF (O) position. The switch is located beside the AC power inlet.
For a list of SMART Board interactive displays in which you can install the camera, see Supported SMART hardware on page 7.

Enable your camera

Once the camera is installed, enable camera mode to use it on your display.

1. Ensure your display is turned on.
2. On the main screen of your display, select Apps.
3. Select Camera from the available apps.

Tip: For the best picture, and effective remote control operation, ensure that the camera cover slideslid all the way to the right.

Using the remote control

Use the infrared remote control to turn the web camera on or off, to open the on-screen menu, and reposition the camera.

it’s paused – it does not turn off.
2| OK| Press OK to reset the camera position.
3| Left and right buttons| Press Left to pan the camera left. Press Right pan the camera right.
Tip
You cannot pan when the camera is fully zoomed out.
4| Preset| Save up to three camera positions.
See Using the preset buttons on the next page.
5| Zoom out| Press to decrease the camera’s zoom.
6| Auto framing| Turn on or off automatic framing. Automatic framing centers the camera on meeting participants.
7| Menu|

•  Press to open the on-screen menu.
•  If in the top level of the on-screen menu, press Menu to exit.
•  If in the on-screen menu, press Menu to return to the previous menu.

8| Up and down buttons| Press Up to tilt the camera up.
Press Down to tilt the camera down.
Tip
You cannot tilt when the camera is fully zoomed out.
9| Zoom in| Press to increase the camera’s zoom.

Using the preset buttons

To save a preset

1. Set the camera’s pan, tilt, and zoom position.
2. Press 1, 2, or 3 for 3 seconds to save the camera position. When you release the button, Set preset # displays. If you hold the button too long, Clean preset # displays.

Note
You can save over a preset.
To recall a preset
Press 1, 2, or 3 for 1 second to recall a saved camera position.
To delete a preset
Press 1, 2, or 3 for 5 seconds to delete a saved camera position. Clean preset

displays

Adjusting on-screen display menu settings

Use the on-screen display (OSD) menu to adjust settings for your camera.
Note
Some video conferencing software mirrors the camera image on the screen, so the on-screen menu will be reversed and difficult to read.

Changing settings in the on-screen display menu

1. Press on the remote control.
   The on-screen display menu appears.

2. Press the up and down arrows to highlight a menu, and then press OK to enter the menu.

3. Press the left and right arrows to change the menu option’s setting.

To return to the main menu, press on the remote control.

Setup

Auto Framing is enabled.
Image style| Default Normal Clarity Bright Soft|
USB mode| Bulk ISOC| This feature is enabled once the camera is restarted.

Exposure

Bright

|
EV| On Off| Only available when Auto is selected under Mode.
EV level| -7<0<+7| EV level is only available when EV is enabled and Auto is selected under Mode.
Backlight compensation| On Off| BLC is only available when Auto is selected under Mode.
Flicker reduction| Off 50 Hz

60 Hz

| Flicker is only available when Auto, SAE, or Bright is selected under Mode.
Gain limit| 0-15| Gain limit is only available when Auto or Bright is selected under Mode.
DRC| Off 1–8|
Shutter speed| 1/5

1/25

1/30

1/90

| 1/100

1/120

1/180

1/250

| 1/350

1/500

1/1000

1/6000

| 1/8000

1/10000

1/20000

1/32000

| Shutter speed can only be set when Manual or SAE is selected under Mode.
Brightness| 0–23| Brightness can only be set when Bright is selected under Mode.
Gain| 0–15| Again can only be set when Manual or SAE is selected under Mode.

Color

mode in the Exposure menu is enabled.

Image

0.39

0.47

0.5

|
Low-light mode| On Off|

Noise reduction

Version

Restore Default

Using your camera with SMART Board interactive displays and

Once you’ve installed the camera, you can use it with video conferencing software, like Microsoft Teams or Zoom.

Maintaining your camera

Follow these instructions to clean the camera without damaging its components.

• Use soft cloth or tissue to clean the camera cover.
• Wipe it with a soft, dry cloth when cleaning the camera lens.
• Wipe it gently with a mild detergent if needed. Do not use strong or corrosive detergents to avoid scratching the lens and affecting the video quality.

Trademark notice
SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2023 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof is covered by one or more of the following U.S. patents:
www.smarttech.com/patents
March 9, 2023

SMART Technologies
smarttech.com/support
smarttech.com/contactsupport
smarttech.com/kb/171866

Was this document helpful?
smarttech.com/docfeedback/171866

References

• Contact Us
• smarttech.com/docfeedback/171866
• smarttech.com/kb/171866
• SMART Support - SMART Technologies
• SMART Support - SMART Technologies
• Patent Listing | SMART Technologies
• smarttech.com/docfeedback/171866
• smarttech.com/en/kb/171858
• SMART Support - SMART Technologies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>