ANSMANN 11KW TYP 2 Electric Vehicle Charging Cable User Manual
- June 13, 2024
- ANSMANN
Table of Contents
USER MANUAL
ELECTRIC VEHICLE CHARGING CABLE
TYPE 2
SCOPE OF DELIVERY
- 11kW charging cable for electric vehicle
- Storage bag
- Instruction manual
First unpack the product and check it for completeness and damages. Do not operate the product if it is damaged. Contact your retailer should you find any damage to the product.
INTENDED USE
Only use the cable for charging electric and hybrid vehicles with alternating
current (AC) at charging stations. The cable may only be used together with
standard-compliant and designated vehicle inlets according to IEC 62196-2
(type 2 plug). Compliance with all the information in these operating
instructions is also part of the intended use. Any other use or use beyond
this is considered misuse and can lead to dangerous situations. The user is
liable for any damage caused by improper use.
SIGNS AND SYMBOLS
Please take note of the following symbols and words used in the operating
instructions, on the product and on the packaging:
| **** | Information: Additional useful information about the product |
|---|---|
| Notice: This notice informs the user of possible damages of all kinds | |
| Warning! Can result in serious injury or death | |
| The product meets the conditions of the European Union. | |
| **** | Dispose of the unusable product in accordance with the legal |
requirements.
| Type 2 adapter
| Do not expose to direct sunlight!
****| Follow the operating instructions!
SAFETY INSTRUCTIONS ****
- Carefully read the entire instruction manual before first operating product. It contains important information on handling the product. If you give the product to third parties, you must include this instruction manual.
- Keep children away from the product and the packaging. The product is not a toy. Children should be supervised to ensure that they do not play with the product.
- This product complies with protection class IP55 (plugged in).
- Never touch the product with wet or damp hands.
- Safe operation cannot be guaranteed if the product shows any kind of damage. If the product is damaged, it must be disposed of or repaired.
- Do not repair the product yourself! Have repairs carried out by a professional electrician.
- Never immerse the product in water or other liquids. Never grasp a unit connected to a power supply if it has fallen into water.
- Failure to observe the safety instructions may result in damage to the unit or dangerous injury to persons!
- This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge in handling the product. Such persons must first be instructed by a supervisor responsible for their safety or supervised during product operation!
- Improper handling of the charging cable can cause explosions, electric shocks and short circuits. The generally applicable safety precautions and the instructions must be observed.
- Before each use, check the charging cable and the contacts for damage and dirt.
- Never charge with a damaged charging cable or damaged vehicle inlet. Never charge with contacts that have become dirty or damp.
- Never pull off the plugs with force. Dangerous electric arcs can cause death or serious injury.
- Only connect the charging cable to vehicle inlets and infrastructure charging sockets that are protected from water, direct sunlight, moisture and other liquids.
- There are electric vehicles that allow the vehicle to be started with the charging cable plugged in. Always make sure to disconnect the charging cable before driving off.
- Never use the charging cable with an extension cable or an adapter. Modifications or alterations are dangerous to life and lead to the immediate exclusion of the warranty.
**** TECHNICAL DATA
| Rated voltage: | 400V AC 50Hz |
|---|---|
| Rated power: | 11kW |
| Vehicle plug: | 1EC62196-2 Typ 2 -lle |
| Infrastructure plug: | 1EC62196-2 Typ 2 -llb |
| No. of phases: | 3-phase |
| Output: | 16A |
| High voltage resistance: | 2600V AC |
| Contact resistance: | <0.3mN (L/N) |
| Isolation resistance: | SOOMQ (1000V AC) |
| Resistor coding: | 680Ω |
| Charge mode: | IEC 62196-2, IEC 61851-1 |
| Contact thermal rise: | ≤50K |
| Protection type: | IPSS (plugged in) |
| Working humidity: | 5% – 95% non condensed |
| Withdrawal force: | 45N / 80N |
| Flammability: | UL94 V-0 |
| Operating temperature: | -25°C – +55°C |
| Plugin cycles: | 210000x (no load) |
| Cable: | 5×2,5mm? + 1×0,75mm? |
| Weight: | Sm: 2,1 kg |
**** OPERATION
Observe the operating instructions for the charging station and the electric vehicle.
- Switch off the vehicle. Go to parking mode.
- Remove the protective caps from the charging plugs and connect the infrastructure charging plug to the infrastructure charging socket and the vehicle charging plug to the vehicle inlet. Ensure the correct assignment and check that the plug connections are correctly and completely plugged in.
- Start the charging process at the charging station. The charging plugs are automatically locked.
- To end the charging process prematurely, follow the operating instructions of the charging station.
- After the charging process is finished, the charging plugs are automatically unlocked.
- Disconnect the charging plugs from the charging station and the electric vehicle (EV must be unlocked).
- Put the protective caps on the charging plugs and roll up the cable without kinks.
**** CHARGING TIME
The duration of the charging process depends on the capacity, the state of
charge of the high-voltage
battery of your vehicle and the permissible charging power of the charging
cable.
The charging current (max. 16A) is regulated by the EV. At very low and very
high temperatures, the charging performance may be impaired.
CLEANING
Only clean the cable when it is not connected to the vehicle or the socket. Clean the charging cable and the dirty contacts only with a dry cloth. Never use harsh detergents, water or steam cleaners. Never immerse the item in liquids. Store the charging cable with the protective caps on in a dry and clean place.
**** DISPOSAL
At the end of its service life, dispose of the cable in keeping with all legal
requirements.
**** The dustbin symbol indicates that waste electrical and electronic
equipment may not be disposed of with normal household waste within the EU.
Please use local recycling and collection points or contact the retailer where
you purchased the product. You thus fulfill your statutory obligations and
contribute to protection of the environment.
**** DISCLAIMERS
The information contained in this instruction manual is subject to change without prior notice. ANSMANN assumes no liability for direct, indirect, accidental or other types of damage or consequential damage that result from improper handling of the product or failure to comply with the information contained in this instruction manual. We assume no liability and grant no warranty claims in cases of improper use of the product.
**** WARRANTY INFORMATION
We offer a two-year warranty on the product. Damages to the product due to failure to observe the instruction manual will void the warranty. This does not affect your legal warranty right. You can find our warranty terms online at www.ansmann.de.
Customer service:
ANSMANN AG
Industriestrasse 10
97959 Assam Stadt
Germany
Support & FAQ: ansmann.de
E-Mail: hotline@ansmann.de
Hotline: +49 (0) 6294 / 4204 3400
MA-1900-0117+1900-0118/V01/12-2022