ZEEGMA Zonder Pro Multi Industrial Vacuum Cleaner User Manual

: June 13, 2024
: ZEEGMA

Table of Contents

Zonder Pro Multi Industrial Vacuum Cleaner
Introduction
IMPORTANT INFORMATION
LIST OF PARTS (fig. A, B)
MOUNTING
TROUBLESHOOTING
CLEANING AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Zonder Pro
Multi

Zonder Pro Multi Industrial Vacuum Cleaner

User Manual

ZEEGMA Zonder Pro Multi Industrial Vacuum Cleaner -
Fig |
---|---
|
|

Introduction

Dear customer!
Thank you for placing trust in us and choosing Zeegma.
We provide you with a product perfect for everyday use thanks to the use of high-quality materials and modern solutions.
We are convinced that the product will satisfy your requirements as it has been designed with utmost care.
Before you use the product, please read this manual carefully.
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: support@zeegma.com

IMPORTANT INFORMATION

Please read this instruction manual before operating the device to familiarise yourself with its functions and use it as intended.
Failure to follow the safety instructions and use not in accordance with the instructions may result in damage to the device, property and injury to persons.
IMPORTANT! KEEP THIS MANUAL FOR FUTURE REFERENCE!

The device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, as well as persons without relevant knowledge and experience in the use of the device, if they are supervised or have been previously instructed in the safe use of the device and the risks involved.
Children must not play with the device.
Cleaning and maintenance of the device must not be undertaken by children without adult supervision.
Disconnect the device from the power source after each use and before any cleaning and maintenance. Disconnect from the power socket by holding the plug, never the cord.
The device is suitable for non-professional use only for vacuuming dust and spills and washing upholstery, carpets or rugs. The vacuum cleaner is not suitable for vacuuming industrial surfaces.
The device is designed for collecting cold ash from fireplaces, ovens, cookers, furnaces, ashtrays or similar ash accumulations.
Warning! Risk of fire.
Do not vacuum hot, burning or glowing ash. The device is designed for cold ash collection only.
The tank should be emptied and cleaned before and after each use of the device.
Do not use paper bags or bags made of other flammable materials.
Do not use devices that are not suitable for vacuuming ash.
Do not leave the device on flammable or polymeric surfaces such as carpets or vinyl tiles.
Do not repair or modify the device. These operations can only be undertaken by an authorised service centre.
Do not start the device if you notice any damage.
Do not use the device if it starts to malfunction, has been dropped or got wet, becomes excessively hot, discolouration, bulges, emits unnatural sounds, smells and if other abnormal phenomena occur. In such instances, contact the manufacturer’s uthorised
service centre immediately.
Check the power cable regularly for damage. Do not use the device if the power cord is damaged.
The device should be operated at room temperature. Do not run the device at low temperatures. The device should be left at room temperature for a minimum of 30 minutes before commissioning.
The device is not waterproof, do not immerse it in water or keep it in a damp place.
Place the device on a flat, horizontal surface and avoid tilting. Avoid placing it on very soft surfaces.
Use the device away from heat sources, high temperatures, hot surfaces, direct sunlight, sources of spark, open fl ames, oils and sharp edges.
Do not use the device in an environment containing flammable, explosive or toxic substances.
Do not use chemicals to clean the device.
Do not use the device for purposes other than those for which it was designed.
Only use the tips included in the set for their intended purpose.
Ensure that the local power source is compatible with the vacuum cleaner’s power requirements.
Do not bend, stretch or pull the flexible hose. Do not use the vacuum cleaner when the hose is damaged.
Do not vacuum up mud, paste-like elements or sharp objects. This can cause damage to the dust container, filter and motor.
Do not use the vacuum cleaner to pull in large paper items or plastic bags, which can clog the suction path.
Do not pull flammable and explosive materials such as lit cigarettes, petrol, etc. with the vacuum cleaner.
Do not block the air outlet at the back of the vacuum cleaner. This can cause overheating and damage to the vacuum cleaner.
Do not pull or carry the device by holding the cable. Do not place any objects on it. Do not drag it over sharp edges of walls and furniture and do not roll it up too tightly after use.

The product complies with the requirements of European Union directives.
In accordance with Directive 2012/19/ EU, this product is subject to separate collection. The product should not be disposed of with municipal waste, as it may pose a risk to the environment and human health. Return the used product to a recycling centre for electrical and electronic equipment.

| |
---|---|---
Note! Caution is required when handling the device.| Read the instruction manual.| Warning: risk of fire / flammable materials.

LIST OF PARTS (fig. A, B)

Adjustable airflow handle
Flexible hose
Transport handle
Upper body
Metal clamps Stainless steel tank
Drainage hole
Wheels
Chrome-plated telescopic tube
On/off switch
Top lid
1. Universal cap
Sponge filter
HEPA filter
ag for dry vacuuming
Round bristle nozzle
Crevice nozzle
Carpet and rug cleaning
nozzle
Upholstery cleaning nozzl
Flexible heat-resistant hose
Metal crevice nozzle
Filter support
Outlet hole

MOUNTING

Insert a flexible hose into the inlet hole (fig. 1). Make sure it is ti ghtly fi xed. To remove the fl exible hose, press the release button, then twist and pull (fig. 2).
Attach the telescopic tube (fig. 3) and the selected nozzle (fig. 4) to the hose.

USE

To use the vacuum cleaner in the blowing function, insert the flexible hose into the outlet hole (fig. 6).
To use the vacuum cleaner to clean dust, dirt and other dry debris, place the HEPA filter on the filter support (fig. 8) and then place the bag inside the vacuum cleaner at the mouth of the inlet hole (fig. 9).
To use the vacuum cleaner to clean ash, insert the heat-resistant filter (18, fi g. A) into the device tank (6, fi g. A) and then place the HEPA fi lter on the fi lter support (fi g. 8). Att ach the metal crevice nozzle (24, fig. B) to the heat-resistant hose (23, fig. B). Note! Only use a heat-resistant hose with a metal crevice nozzle to clean the ash. Make sure the inside of the hose is metal.
Secure the top lid by closing the metal clamps (5, fig. A). Element A should be lifted upwards and element B should be lifted downwards (fig. 5).
Connect the power cord to the power source and then switch on the vacuum cleaner by pressing the switch (10, fig. A).
To adjust the airflow, move the slider on the handle (1, fig. A) up or down as preferred (fig. 10).

HEPA FILTER CLEANING FUNCTION
When using this function, the vacuum cleaner should remain switched on and the flexible hose inserted into the body of the device. Using the adjustable airflow handle, press the button on the back of the top lid (fig. 11) and clean the filter.
Note! This function can only be used if the HEPA filter is slightly dirty. Aft er prolonged use of the device, the fi lter should be cleaned (see: Cleaning and maintenance) or replaced.
VACUUMING UP LIQUIDS AND WET FLOORS

To use the vacuum cleaner to clean spills and leaks, place the sponge filter on the filter support (fig. 7).
Connect the power cord to the power source and then switch on the vacuum cleaner by pressing the switch (10, fig. A).

WASHING OF UPHOLSTERY AND CARPETS

Place the sponge filter on the filter support (fig. 7).
Place the nozzle of your choice on the telescopic tube – the upholstery cleaning nozzle (22, fig. A) or the carpet and rug cleaning nozzle (21, fig. A).
Clean/wash the upholstery, carpet or rug using the appropriate detergents as recommended by the manufacturer of the surface to be cleaned.
Connect the power cord to the power source and then switch on the vacuum cleaner by pressing the switch (10, fig. A).
Suck up residual water and detergent from the surfaces to be cleaned. Repeat if necessary.

Note! If the tank overflows or the device overturns with water inside, the device must be switched off immediately and disconnected from the power source due to the risk of damaging the motor. Overfilling of the tank will be signalled by the characteristic sound of a clogged passage combined with a drop in the device’s suction power.

TROUBLESHOOTING

Problem	Cause	Solution
Dirt / water escapes from the telescopic tube.	Accessories were not fitted
correctly.	Make sure accessories are tightly and correctly fitted.
Poor suction.	Filter / telescopic tube / hose / inlet hole is clogged.

•Clean the filter. replace the bag and make sure the accessories are not clogged.
•Check the upper body and ensure that the plastic clamps are properly closed.
The device makes unusual sounds.| •Overfilled tank.
•The device fell over and the air inlet was blocked.| •Remove excess water.
•Place the device in an upright position.
Smoke is coming out of the device.| •The device is overheated or overfilled.
•Damaged motor.| •Switch off the device and remove excess water. Clean the filter and replace the bag.
•Contact the manufacturer.
Insufficient filtering.| :er life is too long.| Replace the filter with a new one.

CLEANING AND MAINTENANCE

Switch off and disconnect the device from the power supply
Release the metal clamps to open the upper body and pull out the bag for dry vacuuming.
Clean the inside of the tank with a damp cloth and allow to dry completely. Note! If dirty, the filter should be washed under running water and allowed to dry completely. It is recommended to change the filters regularly.

The photos are for illustrative purposes only, the actual appearance of the products may differ from those shown in the photos.

BrandLine Group Service – Support
List of Authorized Service Centers:
www.zeegma.com/en/service
Detailed warranty conditions are available on the website:www.zeegma.com
Thank you for purchasing our product!
zeegma.com