COUGAR MX410 ARGB Mid Tower Case With RGB Strips Instruction Manual

: June 13, 2024
: Cougar

Table of Contents

COUGAR MX410 ARGB Mid Tower Case With RGB Strips
Product Information
Product Usage Instructions
Removing Side Panels

COUGAR MX410 ARGB Mid Tower Case With RGB Strips

Product Information

Model Name	MX410 ARGB
Model No.	Not specified
Case Form Factor	Not specified
Motherboard Type	Not specified
Dimension	Not specified
I/O Panel	USB 3.0, USB 2.0, HD AUDIO, POWER SW, POWER LED, H.D.D LED
Case Drive Bays	3.5 HDD cage, 2.5 HDD/SSD drive bay
Expansion Slots	Not specified
Cooling Fan Support	Up to six fans
Maximum Number of Fans	Not specified
Water Cooling Radiator Support	240mm radiator (front or top)
Transparent Left Panel	Yes
Max. Graphics Card Length	Up to 300mm
Max. CPU Cooler Height	Not specified
Max. PSU Length	Not specified

Product Usage Instructions

Installing the Front I/O Connectors

Connect the USB 3.0, USB 2.0, and HD AUDIO connectors to the corresponding ports on your motherboard.
Connect the POWER SW, POWER LED, and H.D.D LED connectors to the corresponding pins on your motherboard.

Removing Side Panels

To remove the right-side panel, follow the instructions labeled “RIGHT 1” and “RIGHT 2”.

Installing Water Cooling Radiators & Cooling Fans

To install a 240mm radiator on the top panel, follow the instructions labeled “1 (Top) 120 *240”.
To install a 120mm fan on the rear panel, follow the instructions labeled “3 (Rear) 1”.
To install fans on the front panel, follow the instructions labeled “2 (Front) 120 *240”.
Please note that you can either install a radiator on the front or top panel, not both simultaneously.

Installing the Internal 3.5 HDDs

Follow the instructions labeled “1”, “2”, “3”, and “4” to install the internal 3.5 HDDs.

Installing the Internal 2.5 SSDs

Follow the instructions labeled “RIGHT 1”, “RIGHT 2”, “RIGHT 3”, “LEFT 2”, and “RIGHT” to install the internal 2.5 SSDs.

Installing PCI-E Cards

You can install a graphics card up to 300mm long. Please refer to the instructions for proper installation.

Assembly Drawing

A Power button / RGB control button
B USB 3.0 / USB 2.0 / HD audio ports
C Front panel
D Transparent acrylic side panel
E Right side panel
F 3.5″ HDD cage
G 2.5″ HDD/SSD drive bay
H Air filter for top panel
I Air filter for bottom panel
J 3 x 120mm fans for front panel (optional)
K 2 x 120mm fans for top panel (optional)
L 120mm fan for rear panel (pre-installed)

Installing the Front I/O Connectors

MX410 ARGB sports an attractive and compact design with dual RGB strips at the front panel.
Elegant design and a massive transparent acrylic side panel bring you a sleek style.
It also has excellent cooling performance and plenty of storage.

Stylish Dual RGB Strips

With the stylish dual RGB strips at the front panel, you are able to choose variant eﬀects with RGB lighting modes.

Elegant Design with Massive Transparent Acrylic Left Panel

The elegant front panel gives MX410 ARGB a modern and distinctive design, while a massive transparent acrylic left panel and easily cable management allow users to showcase a clean build. Strong Cooling Performance With the possibility of installing up to six fans and a 240mm water cooling radiator, MX410 ARGB allows you to protect your computerʼs most important components from overheating.

Fast Data-processing and Extensive Storage

MX410 ARGB is capable of housing up to 300mm long graphics cards, three 2.5″ SSDs, and two 3.5″ HDDs, which allow you to have high-performance and abundant storage space.

Model Name	MX410 ARGB
Model No.	CGR-5VM6B-ARGB
Case Form Factor	Mid Tower
Motherboard Type	Mini ITX / Micro ATX / ATX
Dimension	210 (W) x 455 (H) x 380 (D) mm / 8.3 (W) x 17.9 (H) x 15 (D) inch
I/O Panel	USB 3.0 x 2 , USB 2.0 x 2 , Mic x 1, Audio x 1 , RGB Control Button
Case Drive Bays	3.5″ : 2 max.

2.5″ : 3 max.
Expansion Slots| 7

Cooling Fan Support

| Front : 120mm x 3
Top : 120mm x 2
Rear : 120mm x 1 (pre-installed)
Maximum Number of Fans| 6 Max.

Water Cooling Radiator Support

| Front : 240mm / 120mm
Top : 240mm / 120mm ( Max. Component Height on Motherboard is 40mm )
Rear : 120mm
Transparent Left Panel| Acrylic
Max. Graphics Card Length| 300 (mm) / 11.8 (in) (Only fans at the front panel)

270 (mm) / 10.6 (in) (Radiator with fans at the front panel)

Max. CPU Cooler Height| 165mm / 6.5inch
Max. PSU Length| 160mm / 6.3inch

Specifications might vary depending on the country or region of sale. *Please choose either of front or top to install a 240mm radiator.

GLOBAL WARRANTY POLICY

WARRANTY PERIODS OF COUGAR GAMING DEVICES Product : COUGAR MX410 ARGB
Warranty : 1 Year

This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.
Only for electrical components.

FEATURES

Dual RGB strips at the front panel with variant RGB lighting modes
Elegant design with massive transparent acrylic left panel
Support for up to six fans and a 240mm radiator
Support for up to 300mm long graphics cards
Support for two 3.5″ HDDs and three 2.5″ SSDs

ACCESSORY KIT Removing side panels

Installing water cooling radiators & cooling fans

Please choose either of front or top to install a 240mm radiator.
Max. component height on the motherboard is 40mm.

Installing the internal 2.5″ SSDs

Installing the internal 3.5″ HDDs

Installing PCI-E cards

Support for graphics card up to 300mm-long

300 (mm) / 11.8 (in) (Only fans at the front panel)
270 (mm) / 10.6 (in) (Radiator with fans at the front panel)

COUGAR USA Technical Service

Tel: 833-256-3778
Mail: rma@compucaseusa.com
https://cougargaming.com/support/contact/upload/

For more information, please visit www.cougargaming.com
Compucase Enterprise Co.,Ltd.
All rights reserved.
Compucase Enterprise Co.,Ltd.
No. 225, Lane 54, An Ho Road Sec. 2 Tainan, Taiwan, R.O.C
Tel:+886-6-356-0606
Service E-Mail:service@cougargaming.com