JBC SB05CC 5cc Syringe Barrel Instruction Manual

JBC SB05CC 5cc Syringe Barrel

Product Information

• Product Name: SB05CC 5cc Syringe Barrel
• Reference: SB05CC

Packing List:

• Cap (Ref. 0029407)
• Seal (Ref. 0029414)
• Syringe Barrel (Ref. 0029409)
• Manual (Ref. 0027371)

Specifications:

• Volume Capacity: 5 cc / 0.17 fl OZ
• Weight : 0.02 kg / 0.04 lb
• Total Package Dimensions / Weight: 90 x 55 x 40 mm / 0.03 kg, 3.54 x 2.17 x 1.57 in / 0.07 lb

Compliance: CE standards, ESD Safe

Warranty: JBC’s 2-year warranty covers manufacturing defects, including replacement of defective parts and labor. Warranty does not cover product wear or misuse. Equipment must be returned to the dealer where it was purchased for the warranty to be valid.

Disposal: This product should not be thrown in the garbage. In accordance with European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

Product Usage Instructions

Barrel Filling:

1. Fill the syringe barrel with solder paste.

Seal Placement:

1. Take the barrel filled with solder paste.
2. Place the seal into the barrel.

Plunger Placement:

1. Pay attention to the fact that the plunger enters with its cylindrical part in the syringe barrel.
2. Ensure that the direction of the teeth angle corresponds to the upper image. Otherwise, the DPM (Digital Pressure Monitor) will not work properly.

Tip Placement:

1. Insert the plunger into the seal and press the seal against the solder paste to eliminate the air inside the barrel.
2. Thread the tip onto the syringe barrel. For more information, visit www.jbctools.com.

This manual corresponds to the following reference: SB05CC

Packing List

The following items are included:

5cc Syringe Barrel: 5 units

Ref. SB05CC includes (5 units each):

• Syringe Barrel Ref. 0029409
• Seal Ref. 0029414
• Cap Ref. 0029407

Operation

Thread the tip onto the syringe barrel. The SB05CC is designed to be used with JBC´s Manual Solder Paste Dispenser DPM, with JBC’s Needles ND-KS and Tappered Tips ND-KP .

• Barrel Filling
  Fill in the syringe barrel with solder paste.

• Seal Placement
  Take the barrel filled with solder paste and place the seal into the barrel.

• Plunger Placement

1. Pay attention to the fact that the plunger enters with its cylindrical part in the syringe barrel and the direcction of the teeth angle corresponds to the upper image. Otherwise, the DPM will not work properly.
2. Insert the plunger into the seal and press the seal against the solder paste to eliminate the air inside the barrel.

• Tip Placement
  Thread the tip* onto the syringe barrel.

Specifications

SB05CC
Syringe Barrel Ref.: SB05CC

• Volume Capacity : 5 cc / 0.17 fl OZ
• Weight: 0.02 kg / 0.04 lb
• Total Package Dimensions/Weight: 90 x 55 x 40 mm / 0.03 kg (L x W x H) 3.54 x 2.17 x 1.57 in / 0.07 lb

Complies with CE standards. ESD Safe.

Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

0027371-09023
www.jbctools.com

References

• JBC Soldering Stations, Irons and Rework equipment for electronics
• Warranty Extension

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>