ORIVISION EH404 HDMI IP Video Streaming Encoder User Guide

2023
4/8 Channels HDMI Video Encoder
User Guide
EH404&EH408
LIU JOYCE

Overview

1.1 product description
EH404 is a professional hardware video and audio encoder. Which designed to meet the 4CH 4K@30HZ HDMI Video transmission applications. It supports H.264 high-performance encoding. Also, it supports the most protocols including HTTP/RTMP/RTMPS/HLS/UDP/RTSP/Onvif, etc.
It’s high integration and cost-effective design make this device widely used in the variety of field such as CATV digital head-end, hotel IPTV system, live streaming broadcast, streaming media server etc. Also, the encoder works with the online live broadcast platform, such as YouTube, Ustream, Twitter, WOWZA, Facebook Live, etc.
1.2 product picture

1.3 Product’s Parameter

Video

Input interface| EH404: 4 channels HDMI Input EH408: 8 Channels HDMI Input
Frame Rate| 5-60hz
HDCP| HDCP 1.4
Output interface| EH404:1X Ethernet Port(RJ45)
EH408:2X Ethernet Port(RJ45)
Video Encoding| H.264/Baseline Profile/Main profile/High Profile
Max bitrate| 16kbps-12Mbps
Rate control| CBRNBR
Audio
Input Interface| EH404: 4X External audio and HDMI built-in Audio
EH408: 8X External audio and HDMI built-in Audio
Audio encoding| ACC,G711
Audio Encoder type| LCAAC,EAAC,EAACPLUS
Bit-rate| 48k,64k,96k,128k,160k,192k,256k
Sampling Accuracy| 24Bit
Audio Data-rate| 64kb/s to 384kb/s
Network
RJ45| 1000M Ethernet
Protocols| HTTP/RTSP/RTMP/RTMPS/HLS/FLV/ONVIF/Multicast/SRT
Firmware| Enable by uploading files
General
Temperature| 0-45°C for woking -20∼60°C for storing
Humidity| <90%, non-condensing
Voltage| EH404:DC 12V/2A EH408: DC 220V

Initial installation connection

2.1 Connect power
Use the standard power adaptor (DC12V/2A) connected to the device(EH404). The power light will be always on after the device is powered on.
EH408 using 220V Power.

Note
Please use the standard power adaptor provided. Using other unqualified power supplies may damage the device.

2.2 Connect displayer
Connect the HDMI/VGA/CVBS or SDI cable to one end of the display device such as a monitor and an electronic screen (DH931&DH921 doesn’t support simultaneous output of HDMI, VGA or CVBS, the user can choose one of them to output).
▼Using HDMI cable to connect HDMI output interface with HDMI display.

2.3 Connect the encoder to user’s computer
Connect the encoder and the computer directly through the network cable.

2.4 Log in the control web with 192.168.0.31
According to the above steps, after connecting the decoder to the computer with a network cable.
▼ Setp1: find the “Network & Internet Settings”

▼ Step2: “change adapter options”——”Local Area Connection”

▼ Step3: “Properties”——“Internet Protocol Version (TCP/IPv4)”

▼ Step4: change the IP to 192.168.0.XXX—— “OK”

▼ Step5: Open the WEB browser, and enter the IP address of the decoder directly (the default is 192.168.0.31) to open the login interface of the decoder. The default username and password of the decoder is admin/admin and then click “Login”.

Introduction to the control page of the encoder

3.1 Status
▼ Status：Showing the status information of input and output from Group1~8.

Each group displays two output status information, and the resolution of the input signal is automatically recognized and displayed.
3.2 Network
▼ Network: Users can modify the network IP and DNS here

DHCP： When the DHCP function is enabled, you also need to access the switch that automatically assigns an IP address. While the encoder IP address is dynamically assigned by the switch. You need to view the encoder IP from the switch. If you cannot view it, you can contact the manufacturer to provide IP inquiry software.
DNS0，DNS1 ：Please set the DNS in the encoder network settings correctly, when using RTMP live streaming. You can find out the DNS parameters of your network through the network connection details of your computer. Or log in to the router to check the status of the WAN port.
3.3 Media Setting
▼ Channels Setting
Set 1~4 channels input signals by switching the Group 1~4;
Group 1 represent input interface 1;Group 2 represent input interface 2;
Group 3 represent input interface 3;Group 4 represent input interface 4;
Supports two output streams each group
Chanel 1 represent main-stream output; Chanel 2 represent Secondary- stream output

▼ Video Setting

Encoder type: Only support H.264
Profile: baseline profile/main profile/ high profile Optional
Output Resolution:
38402160,19201080,1920960,16801200,1600900,14401050,1440900,1360768,1280720,1280800,1280768,1024768, 1024576,960540,850480,800600,720576,720540,720480,720404,704576,640480,640360,480270,Auto
When you choose auto, the input and output resolutions are the same.
RC Model: VBR/CBR Optional
Frame rate: 5-60fps (when the input resolution is 720i/50,1080i50, the frame rate will choose 25)
GOP: 1-200, it shows picture quality, default setting is advisable.
If your input a 30hz video, it recommend that the GOP should be smaller than 30;
If your input a 60hz video, it recommend that GOP should be smaller than 60
Bitrate: 16-1200K (Network bandwidth setting)
The higher the bit rate, the larger the data transmitted
Fluctuate: recommend auto
Note: Modifying the above parameters does not need to reboot the encoder
▼ Audio Setting
Audio input mode: Analog- External audio; Digital- HDMI built-in audio
Audio type : LCAAC/EAAC/EAACPLUS
Audio bitrate : 48k, 64k, 96k,128k, 160k, 192k, 256k

▼ Server Setting

Enable the corresponding protocols according to the requirements.
3.4 Protocol Setting
HTTP Protocol

RTSP Protocol

RTSP Push

Multicast Protocol

HLS Protocol

RTMP Protocol

SRT Protocol

3.5 OSD
▼ OSD: User can upload the station logo, picture, etc. through the OSD, and it supports the JPG format.

Note: Insert two groups of text and two pictures at the same time for each group
Tex1 X: 0-1920 is optional, display the left and right position of the text
Tex1 Y: 0-1080 is optional, display the up and down position of the text
Tex1 size: 8-72 is optional
Tex1 Alpha: 0-128 is optional,
Tex1 Color: choose the color you want to display
Tex1 Bg Color: choose background color of the text on the video
Content1: input the content of the text you want
TEX2 is the same as TEX1

Pictures Setting
Picture1: disable/ enable ( disable: no images enable: display the images)
Picture1 X: 4-1920 is optional to set the left and right position of the picture
Picture1 Y: 4-1080 is optional to set the up and down position of the picture
Alphal: 0-128 is optional
Name: display the name of the picture1
Upload: choose to upload the image(support *.bmp format of the picture and the file size less than 1M
Picture 2 is the same as Picture 1

Explanation：
1、 The set of the three pictures that can be inserted are the same.
2、 Transparent background of the picturesetting: R－177，G－204，B－233| TEST
---|---

3.6 System Setting
▼ Change password: It’s used for modifying the login password of WEB

▼ System information: used to check the serial number of device, software version number, and hardware version number;

▼ Auto reboot: It can be set to restart after a few hours, if you don’t need it, you can choose to disable it.

▼ NTP settings

If the user needs to enable the NTP function, The encoder must be linked to the WAN; or have an NTP server on the LAN.
Enable- When this mode is enabled and if the encoder does not get NTP information, the encoder also works.
Must- It means must enable mode. When this mode is enabled, all protocols are unavailable when the encoder does not get NTP information
Zone sle-Customers choose the correct time zone according to their own time zone, if the list does not have what you want, please contact us
▼ Parameter bakup
This function allows the user to save the setup parameters locally；Or restore the parameter settings by uploading the parameter file.

▼ Firmware upgrade
Contact us (support@orivision.com) to get the newest firmware. After getting the file, pls don’t decompress it, upload it directly. Reboot the decoder after uploaded successfully.

▼ System settings:
Reset button is used for initialization operation of the system.
Reboot button is used for remote restarting of the decoder.

How to connect the Encoder to the internet

Step1: Check the IP of the signal source connected to the Network or router. For example: the router’s network IP is 192.168.10.128
Step2: Change the default IP of the decoder 192.168.0.31 to 192.168.10.XXX; The user needs to confirm that the decoder and encoder or network signal source (Such as IP camera) are in the same network segment.
Step3: Connect the decoder with the user’s PC with cable directly. And log in to the control page through the default IP 192.168.0.35. Please refer to 3.4 for operation steps
Step4: Find the Network set and change the IP to 192.168.10.XXX and the gatway to 192.168.10.1, then press the “Setup” button and reboot the encoder.
Step5: wait for a minute, then you can refresh the web and login with the new IP.
Note:
If user can’t log in by new IP, Pls check the DNS of the router. Then reset the encoder and re-login to the web according to the above steps, modify the IP, gateway, and DNS.

How to streaming to YouTube/Facebook via RTMP/RTMPS

Step1: Before making live broadcast, you will need to check the following.

•  Play the stream address in the encoder with the VLC player and confirm that it can play normally.
• Make sure you have upgraded the newest firmware for RTMPS.
• Canon camera don’t have audio output, you will need to input an external audio.
• Microphone is not an audio source.

Step2: Login Your YouTube or Facebook account and find “Go Live”. User can get a stream Key and URL

Step3: Log in the control web of the video encoder. Find the “Media” Page, enable the RTMP protocol as bellow:

Step4: After set the RTMP，pls press the “SET UP” button on the bottom of the page. Then press “REBOOT” button in the system page.
Note: If you streaming failed on Facebook and Youtube.

Pls check your DNS setting. The value of DNS0 and DNS1 is the DNS of the router.

How to set the SRT protocol in the encoder

There are two modes are available: caller and Listener

6.1 Listener mode

1. SRT Port: 7120 is default. But customers can modify it and suggest to set it more than 1024.
2. SRT delay: 120 is default.
3. SRT Key: set a password of at least 10 digits if the user need.
4. Press the “set up” butter and reboot the encoder after any change the parameter.
5. After reboot the encoder, the user can use the SRT address: srt://ip:port to pay it VLC Player to make it working or paste the address into the video decoderIf the user wants to encrypt the SRT
   Then the encrypt SRT address format: srt://ip:port?passphrase=passwords
   E.g: srt://192.168.8.31:7120?passphrase=1234567890

6.2 Caller mode

1. SRT Port: 7120 is default. But customers can modify it and suggest to set it more than 1024.
2. SRT delay: 120 is default.
3. SRT Key: set a password of at least 10 digits if the user need
4. Press the “set up” butter and reboot the encoder after any change the parameter.
5. After reboot the encoder, the user can use the SRT address: srt://@:port?mode=listener to pay it VLC
6. Player to make it working or paste the address into the video decoderIf the user wants to encrypt the SRT
   Then the encrypt SRT address format: srt://@port?mode=listenser&passphrase=passwords
   E.g srt://@:7120?mode=listener&passphrase=1234567890

Description of decoder stream address:

1. Video Encoder choose “listener” mode, the SRT address format in Video Decoder:
   srt://ip:port
   srt://ip:port?passphrase=passwords

2. Video Encoder choose “caller”mode, the SRT address format in Video Decoder:
   srt://@:port?mode=listener
   srt://@port?mode=listenser&passphrase=passwords

How to reset/reboot the encoder

Solution1: find the system settings, click the Reboot or Reset button.

Reboot: Restart the encoder
Reset: Restore factory settings
Solution2: There is an RST button on the top of the device’s panel. Insert a pin into this hole and hold it for about 10 seconds. The reset is successful when the status light is no longer flashing

How to upgrade the firmware

1. Once the user has obtained the firmware, do not unzip it and upload it directly
2. During the upgrade process, don’t refresh or close the webpage and don’t turn off the encoder.
3. When the system prompts that the upgrade is successful, Pls reboot your encoder to finish installing update.
4. If you are prompted that the upgrade failed, pls don’t reset it, just reboot itChoose the correct the firmware — Upload it — “prompts that the upgrade is successful”— Reboot EncoderIf the upgrade prompt fails, refresh the page and show the upgrade page, the user can try to upload again.If the user fails to upgrade, you cannot log in to the control page, but it can be pinged.
   You can contact us to guide you to restore your system (support@orivision.com)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>