Newland FM3080 Hind Stationary Barcode Scanners User Guide
- June 15, 2024
- Newland
Table of Contents
FM3080 Hind
Quick Start Guide V1.0
FM3080
Connecting to the host with USB cable
Connecting to the host with RS-232 cable (optional)
Scanning instructions
Sense scan mode:
-
Connect the scanner to a host with the cable.
Then the scanner will be powered on. -
Present the barcode on a mobile phone screen or paper to the center of the scan window.
-
Fora successful read, the scanner will beep.
Barcode programming
- Use of programming barcodes
- Factory defaults
- USB interface
- Terminating character suffix
- Scan mode
FCC
Radiofrequency interface requirements Radio transmitters (part 15)
This device complies with part 15 of the FFC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
** Tested to comply with FCC Standards
FOR HOME OR OFFICE USE**
CE / WEEE
Marking and European Economic Area (EEA) Statement of Compliance
We hereby declare that this device complies with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
The ventilation should not be impeded by covering the ventilation openings
with items such as newspapers, table cloths, curtains, etc.;
This product’s max operating ambient temperature is 60 degrees C.
Direct Current Symbol .
Recycling
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
Troubleshooting
When the scanner is not working, please:
- Ensure that all cable connections are secure and that only the supplied cables are used.
- Ensure that the screen backlight is on when reading digital barcodes on a mobile phone and that the barcode is not defaced when reading it on paper. Wrinkled, soiled, or torn barcodes might be unreadable.
- Ensure that the barcode type is enabled.
Visit our website
newland-id.com