Tenda SG105M 5x Gigabit Ethernet Switch Installation Guide
- June 13, 2024
- Tenda
Table of Contents
Tenda SG105M 5x Gigabit Ethernet Switch
Quick Installation Guide
- 5-port 10/100Mbps Desktop Switch
- 8-port 10/100Mbps Desktop Switch
- S105/S108/S105M/S108M
- 5-Port Gigabit Ethernet Switch
- 8-Port Gigabit Ethernet Switch
- SG105/SG108/SG105M/SG108M
Package Contents
- Switch * 1
- Power adapter * 1
- Quick installation guide * 1
Please read this quick installation guide before you start. This guide
instructs how to install and connect the device. For more information, such as
the description of symbols displayed on relevant materials, please visit
www.tendacn.com.
If any item is missing or damaged, please keep the original package and
contact the local reseller or distributor immediately.
Device Appearance
- S105&S105M&SG1058SG105M
- S108&S108M&SG108&SG108M
Network Topology
SG105 for illustration
Product Overview
S105, S108, S105M, S108M, SG105, SG108,SG105M and SG108M are in a same serial. Here SG105 is taken as a guide.
LED | Status | Description |
---|---|---|
On | Power supply is provided for the device properly | |
Off | Power supply is not provided for the device properly | |
1~5/8 | Solid | Indicates the corresponding port is connected |
Off | Indicates no connection is established | |
Blinking | Indicates the corresJX)nding JX)rt is connected and transferring |
data
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
The mains plug is used as disconnect device, which shall remain readily
operable.
NOTE:
- The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
- To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
- Operating Temperature: 0 °C – 45 °C
- Operating Humidity: (10% – 90%) RH, non-condensing
Caution:
- Adapter Model: BN003-A03005E, BN003-A03005B,BN003-A03005U
- Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
- Input: 100-240V AC, 50/60Hz 0.3A
- Output: 5V DC, 0.6A
- ===: DC Voltage
Caution:
- Adapter Model: BN003-A05009E, BN003-A05009B,BN003-A05009U
- Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
- Input: 100-240 V AC, 50/60 Hz 0.3 A
- Output: 9 V DC 0.6A
- ===: DC Voltage
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
- The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
- To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
Technical Support
Shenzhen Tenda Technology Co., Ltd.
Floor 6-8, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District,Shenzhen,
China. 518052
Website: www.tendacn.com
E-mail: support@tenda.com.cn
Copyright
© 2018-2023 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co.,
Ltd. Other brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders. Specifications are subject
to change without notice.
V3.0 Keep for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>