nhbs Moth Trap Instructions
- June 13, 2024
- nhbs
Table of Contents
nhbs Moth Trap
Product Information
The NHBS Moth Trap is a highly effective tool designed toattract and capture moths. It is perfect for use in gardens,natural habitats, and outdoor spaces. This trap utilizes acombination of light and pheromones to attract moths, making it anideal solution for monitoring and studying moth populations.
Key Features:
- Highly effective in attracting and capturing moths
- Utilizes a combination of light and pheromones
- Perfect for gardens, natural habitats, and outdoor spaces
- Great for monitoring and studying moth populations
Package Contents:
- 1 x NHBS Moth Trap
- 1 x Power cord
- 1 x Pheromone lure
- 1 x Instruction manual
Product Usage Instructions
- Open the package and carefully remove all the contents.
- Assemble the NHBS Moth Trap by following the instructionsprovided in the accompanying manual.
- Connect the power cord to the trap and plug it into a suitablepower outlet.
- Attach the pheromone lure to the designated area of the trap,as indicated in the manual.
- Place the trap in an outdoor area with high moth activity, such as a garden or natural habitat.
- Switch on the trap using the power switch. The trap will emitlight and release pheromones to attract moths.
- Leave the trap running overnight or for the recommendedduration specified in the manual.
- In the morning or after the desired trapping period, switch off the trap and carefully remove any captured moths.
- Dispose of the captured moths appropriately, following local regulations and guidelines.
- Clean the trap and store it in a safe place for future use.
For more detailed information on how to assemble, operate, or maintain the NHBS Moth Trap, please refer to the instruction manual provided in the package or visit our website at www.nhbs.com.
Instructions for assembly
- Assemble the outer walls of the trap container into a square by joining the strips of hook & loop tape together.
- With the flaps folded to the outside of the box take the base panel, with the darker side facing up, and slide it down inside the box and join it to the side walls using the hook & loop tape.
- Hold the side wall lamp holder support frame over one of the top edges of the box, ensuring it is one without a flap, and slot into position. Make sure the tube with the securing screw is on the inside of the box.
- Place egg boxes or similar inside the trap and fold the flaps over so that they rest on the wall support.
- Place the lamp holder arm fully into the side support frame and tighten screw to secure.
- Support the lamp holder with one hand and carefully screw in the blacklight bulb. It needs to be tight enough to ensure connection but over-tightening can cause damage to the contacts inside the bulb holder.
- Your trap is now ready to be plugged into a mains power source.
References
Read User Manual Online (PDF format)
Loading......