nhbs Compact LED Skinner Moth Trap Instructions
- June 6, 2024
- nhbs
Table of Contents
NHBS MOTH TRAP Instructions for assembly
- Assemble the trap container by attaching the walls and base together using the Velcro strips.
- Ensure the base is attached on the inside of the trap to prevent rain from entering.
- Slide the wall supports onto the container walls without baffles (sloping panels).
- Place egg boxes or similar inside the trap and flip the baffles over so that they rest on the wall supports.
- Slide the light holder into the corresponding slots on the wall supports.
- Screw-in the blacklight bulb tightly to ensure a waterproof seal.
- Plug the trap into the main power source.
Please note: When operating this trap please take care to not over- tighten the bulb as this can damage the contacts within the bulb holder.
Read User Manual Online (PDF format)
Loading......