tenda SG108M 8x Gigabit Desktop Ethernet Switch Installation Guide
- June 13, 2024
- Tenda
Table of Contents
Quick Installation Guide
5-port10/100Mbps Deck ion Stitch
8-port 10/100Mbps Desktop Switch
S105/5108/S105M/S108M
Package Contents
- Switch * 1
- Power adapter * 1
- Quick installation guide * 1
Please read this quick installation guide before you start. This guide
instructs how to install and connect the device. For more information, such as
the description of symbols displayed on relevant materials, please visit
www.tendacn.com.
If any item is missing or damaged, please keep the original package and
contact the local reseller or distributor immediately.
Device Appearance
-
S1058S105MESG10585G10SM
-
510885108M8SG1088SG108M
Network Topology
- 50105orstrton
Product Overview
S105, S108, S105M, S108M, SG105, SG108, SG105M and SG108M are in a same
serial.
Here SG105 is taken as a guide.
| LED | Status | Description |
|---|---|---|
| On | Power supply is provided for the device properly | |
| Off | Power supply is not provided for the device properly | |
| 1-5/8 | Solid | Indicates the corresponding port is connected |
| Off | Indicates no connection is established | |
| Blinking | Indicates the corresponding port is connected and transferring data |
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
The mains plug is used as disconnect device, which shall remain readily
operable.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment.
(2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
Operating Temperature: 0 °C – 40°C
Operating Humidity: (10% – 90%) RH, non-condensing
Caution:
Adapter Model: BNO03-A03005E, BNO03-A03005B, BNO003-A03005U
manufacturer. SHENZHEN HEWEISHUN NETWORK TECHNOLOGY., LTD.
Input: 100-240V AC, 50/60Hz 0.3A
Output: 5V DC, 0.6A
===: DC Voltage
Caution:
Adapter Model: BNO03-AO5009E, BNO03-A05009B, BNO03-A05009U
Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY
CO.,LTD.
Input: 100-240 V AC, 50/60 Hz0.3A
Output: 9 V DC 0.6A
===: DC Voltage
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
- The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
- To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
Safety Precautions
Before performing an operation, read the operation instructions and
precautions to be taken, and follow them to prevent accidents. The warning and
danger items in other documents do not cover all the safety precautions that
must be followed. They are only
supplementary information, and the installation and maintenance personnel need
to understand the basic safety precautions to be taken.
- Clean only with dry cloth.
- Do not block any ventilation openings using things such as newspapers, table-cloth, curtains.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles and at the point where they exit from the device.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this device during lightning storms or when unused for long periods of time.
- Mains plug is used as the disconnect device, and shall remain readily operable.
- The power socket shall be installed near the device and easily accessible.
- Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, for example, power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not work normally, or has been dropped.
- Warning: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. The device shall not be exposed to dripping or splashing.
- Warning: To reduce the risk of electric shock, do not remove the cover as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
Technical Support
Shenzhen Tenda Technology Co., Ltd.
Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052
Website: www.tendacn.com
E-mail: support@tenda.com.cn
Copyright
© 2018-2023 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology
Co., Ltd. Other brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders. Specifications are subject
to change without notice.
V3.0 Keep for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>