PHOENIX GOLD ZXMSP2 Polestar 2 Subwoofer Amplifier Upgrade Instruction Manual
- June 13, 2024
- PHOENIX GOLD
Table of Contents
ZXMSP2 Polestar 2
Subwoofer Amplifier Upgrade
Instruction Manual
Installation Tools Required
**Vehicle used for installation:**
Polestar 2 (2019 ->)
Harman Kardon
Some differences may occur between different car and year models.
ZXMSP2 Installation 1
Tools required:
- Remove the luggage floor
- Locate the two bolts
- Unscrew the two bolts
- Pull up the threshold to remove it ZXMSP2 Installation
Tools required:
- Remove the luggage mat ****
- Pull out the left side panel
- Left side panel pulled out
- Remove the two clips
- Disconnect the connector
- Connector disconnected
- Connect connector to SOT cable
- Route SOT cable under the carpet
- Route SOT cable under the panel
- Cable routed under the panel
- Route the cable at the back
- Cable tie the cable at the back
- Amp at the right side of the trunk
- Disconnect the power connector
- Connect SOT cable to connector
- Connect SOT connector to amp
- Route SOT to the front of the trunk
- Put back the trunk carpet
- Install the cables to the ZXM500.1
- Connect ZXM500.1 in the car
- Connect the high-level connector
- Run speaker wire to subwoofer
- Reassemble trunk in reverse order
- Install is now complete
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new upgraded system will
bring you joy and happiness for many years to come when listening to your
favorite music. As always, our goal is bringing you The Gold Standard in
Sound.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>