domi 0586.cdr Pao Chaise Lounge Chair Instruction Manual
- June 14, 2024
- domi
Table of Contents
domi 0586.cdr Pao Chaise Lounge Chair
Tips:
- Do not tighten any bolts until it tells you to.
- It will save you one hour.
- You can loose all the screws, just little on the nuts.
Parts List
This is the instruction of 2 Lounge Chairs.
Friendly Tip:
PLEASE DON’T COMPLETELY TIGHTEN THE SCREWS DURING ASSEMBLY. After all the
screws are assembled in place, tighten them together.
ASSEMBLY INSTRUCTION
Step 1:
Connect armrests #A1 and #B1 using 2 support tubes #C, as depicted in the
provided image, and secure them with the hardware #H1 and #N1.
WARNING:
Please REFRAIN from fully tightening the screws until all of them have been
properly positioned.
Step 2:
Attach another support tube (#D1) between armrests (#A1 and #B1) as shown with
hardware (#H1 and #N1).
WARNING:
Please REFRAIN from fully tightening the screws until all of them have been
properly positioned.
Warm Tip:
- Before assembling the chair plate and the backrest, please confirm the edge of the chair plate is as smooth as the backrest.
- Only the above tip is confirmed, the assembly could be continued to avoid further inconvenience.
- Anything unclear, please feel free to contact customer service.
Step 3:
Assemble the chair plate (#E1) to the finished frame with hardware (#I1, M1, L1
and O1) as shown below.
WARNING:
Please REFRAIN from fully tightening the screws until all of them have been
properly positioned.
Step 4:
As shown in the picture, secure the backrest #F1 onto the finished frame, using
the hardware #I1, #L1, #N1 and #O1.
WARNING:
Please REFRAIN from fully tightening the screws until all of them have been
properly positioned.
Once all the parts and hardware are properly positioned, proceed to tighten all the screws. Afterward, cover the outer screws with the plastics #K1 and
J1 as shown below. Repeat these steps for the remaining chair.
Thanks for your purchase
At domi outdoor living, we believe in our products. friendly, easy-to-reach
after-sales service. So if you have any questions about our product and
assembly, please feel free to contact us. We will be here for you.
Support:
After-sales contact email:
[email protected].
Please tell us your order ID when contact. Attach photos of damaged part for instant reply.
© Copyright 2022-2024 domi LLC. I All Rights Reserved.